| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix sched scan IE sizing
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: make sure the SEID is linear before reading it
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream.
Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it. |
| In the Linux kernel, the following vulnerability has been resolved:
cipso: adjust cached option offsets when removing CIPSO
cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust
cached offsets for options that follow them.
For example, with a valid 10-byte CIPSO option followed by a seven-byte
RR option, parsing records rr at offset 30. Removing CIPSO moves RR to
offset 20, while the cached offset remains 30. Consumers such as
ip_forward_options() and __ip_options_echo() then access the wrong bytes;
the latter may interpret packet data as the option length and copy it into
fixed-size option storage.
Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and
router_alert offsets when they follow CIPSO. cipso_len is the distance
the first memmove() shifts those options. The later header move and
network-header reset relocate the bytes and their offset base together. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Allocation of resources without limits or throttling in Windows Netlogon allows an authorized attacker to deny service over a network. |
| Out-of-bounds read in Windows HTTP.sys allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Credential Manager allows an authorized attacker to elevate privileges locally. |
| Generation of error message containing sensitive information in Windows NTFS allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Disable device buffer exporting
Device buffers are never intended to be exported. Disable exporting
support explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Refactor registration
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE
open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a
copy of the tree at the given path. The caller needs to be privileged
over its current user namespace because the new mount namespace will be
owned by it. It doesn't need to be privileged over the mount namespace
the tree is copied from. An unprivileged user just needs to create a
user namespace first.
The copy follows the rules of a detached bind mount. Without
AT_RECURSIVE only the mount itself is cloned and its children are left
out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when
the caller has privileges over the source mount namespace because it
could unmount those mounts anyway. Not so for an unprivileged user in
that mount namespace. For them a mount namespace copy is what unshare()
does. copy_mnt_ns() copies everything including unbindable mounts and
lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing
that was covered gets revealed.
create_new_namespace() only does the locking and so the covered content
is right there in the new mount namespace:
# mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered
# echo hidden > /tmp/otn/covered/under.txt
# mount -t tmpfs none /tmp/otn/covered
uid 1000, after unshare(CLONE_NEWUSER):
fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE);
setns(fd, CLONE_NEWNS);
open("/covered/under.txt", O_RDONLY) -> "hidden"
Covering paths with mounts is how container runtimes mask parts of
/proc and /sys and how admins hide things.
When the caller's user namespace doesn't own the source mount namespace
copy the way unshare() does and refuse a non-recursive copy of a mount
that has anything mounted below the requested directory and copy
unbindable mounts in a recursive copy. A caller that is privileged over
the source mount namespace sees no change. |
