| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mdb: restart port group walk after deletion
br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking
mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through
br_multicast_sg_del_exclude_ports() and unlink other port groups. If the
cursor points into one of those groups, the next iteration dereferences a
stale cursor and can leave mp->ports pointing at freed memory.
A following RTM_GETMDB exposes the dangling pointer:
BUG: KASAN: slab-use-after-free in br_mdb_dump
Read of size 8
br_mdb_dump
rtnl_mdb_dump
rtnl_dumpit
netlink_dump
Reset the cursor to mp->ports after every deletion. The deletion removes at
least the selected group, so the restarted walk always makes progress. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read
rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0
even when address matching (IP6T_RT_FST_MASK) is requested.
In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing
addresses against rtinfo->addrs[i] and terminates backwards at the bottom
of the loop:
if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) {
i++;
}
if (i == rtinfo->addrnr)
break;
When addrnr is 0, if the first packet address matches rtinfo->addrs[0],
i is incremented to 1. Because i is now strictly greater than addrnr (0),
the loop termination condition (i == rtinfo->addrnr) is bypassed and will
never be satisfied.
If a crafted IPv6 packet contains matching routing addresses, i will
advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal()
reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings
or kernel panics.
Fix this by:
1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but
rtinfo->addrnr is zero.
2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr)
into the for-loop header condition and removing the backwards break
at the end of the loop body. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
the attribute access completes. Acquire the mutex killably so that the
device ioctl remains interruptible while waiting for KVM_RUN to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no post-launch
host ioctl is needed to arm or request teardown.
On upstream master 62cc90241548, generic KASAN reported:
BUG: KASAN: slab-use-after-free in do_raw_spin_lock
Write of size 4 at addr ff60000005e58898
kvm_riscv_vcpu_set_interrupt
kvm_riscv_vcpu_hrtimer_expired
__hrtimer_run_queues
hrtimer_interrupt
The object was allocated by KVM_CREATE_VCPU and freed concurrently by:
kvm_destroy_vcpus
kvm_arch_destroy_vm
kvm_destroy_vm
__fput
For deterministic validation, I added mdelay(1000) immediately after
the existing next_set = false assignment. This only widens the
existing post-clear callback window. A no-delay trace build naturally
reached the callback-after-teardown-start/before-deinit ordering in 12
of 200 runs, but 1,500 stock-kernel stress iterations did not produce a
KASAN report, so natural reproduction is timing-sensitive.
Always invoke hrtimer_cancel() for an initialized timer. Preserve the
existing -EINVAL result when the timer is no longer set, but only after
synchronizing with a running callback.
With this patch, hrtimer_cancel() blocked for the full widened callback
window before vCPU destruction. KASAN reported no error in 100
fixed-and-widened runs or 200 fix-only timing-sweep runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix race in read_unconf_index_list()
read_unconf_index_list() counts unconfigured controllers before allocating
its response, then checks the device flags again while filling it.
hci_dev_list_lock stabilizes list membership, but it does not serialize the
per-device flags. During asynchronous controller setup, the worker can set
HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller
omitted from the allocation count can then become eligible for the fill
pass, causing an out-of-bounds write to rp->index[].
Allocate space for every device on hci_dev_list. Since list membership
cannot change while hci_dev_list_lock is held, the response remains large
enough regardless of flag transitions. The reported count and response
length still include only eligible unconfigured controllers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do not set FMODE_CREATED unless a regular file was opened. For
O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's
-EFTYPE check.
Defer closing a legacy POSIX handle on a non-regular inode until
after inode lookup. This avoids closing it again if lookup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix cursor and pointer handling when recovering iunlink buckets
LOLLM pointed out a bug in xlog_recover_iunlink_bucket:
1. We don't null out prev_ip after releasing it, which can lead to UAF
problems if the inodegc flush call in the loop fails.
at which point I noticed even more bugs:
2. If the inodegc flush inside the loop fails, we also leak @ip.
3. We set prev_agino to agino having already advanced agino, which
results in inodes with i_prev_unlinked set to itself.
4. If we exit the bottom of the loop with prev_ip set, then prev_ip
aliases ip and we also set its i_prev_unlinked to itself.
Bugs 3 and 4 introduce loops into the unlinked list, though these loops
don't surface because we immediately flush each unlinked inode after
loading it.
Fix all of these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up processing both again but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels or run NAT and adds the
new extension for that breaking the pointer in the expectation
list causing UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where we need to process both clones without
modifications in the same zone. So, let's just reset the entry in
case for some reason we got an skb with a shared one. This doesn't
affect any known use cases, but avoids any potential problems with
sharing and modification of the unconfirmed ct entry.
Unlike openvswitch module, act_ct allows for NAT without commit.
Changing that would be a uAPI break. So, act_ct needs to reset on NAT
regardless of the commit flag to avoid reallocation of the extension
space. This, however, doesn't really change the picture for sensible
networking cases as there should be no need to run the same packet
twice (before and after the clone) through conntrack without packet
header or zone changes and without commit.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction
We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which
is a Bad Idea(tm). Freeing the page tables is fair game (this is what
this callback is for), but freeing the container that could still be
referenced by another part of the system is not great.
Instead, grow separate destructors that gets called when we tear the VM
down for good. From there, we can nuke both the individual MMUs as well
as the global array that points to them, safe in the knowledge that the
vcpus themselves have been destroyed already. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free inet_opt and ireq_opt after an RCU grace period
tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.
Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.
Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.
Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().
A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().
Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.
IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix missing iov bounds check in parse_posix_sids()
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound. |
| In the Linux kernel, the following vulnerability has been resolved:
net: iptunnel: fix stale transport header during tunnel decapsulation
Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale
transport_header offset after tunnel decapsulation.
BUG: unable to handle page fault for address: ffffed102091a42e
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__asan_load2
<IRQ>
qdisc_pkt_len_segs_init (net/core/dev.c:4145)
__dev_queue_xmit (net/core/dev.c:4787)
br_dev_queue_push_xmit (net/bridge/br_forward.c:53)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:315)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6099)
__netif_receive_skb_list_core (net/core/dev.c:6287)
netif_receive_skb_list_internal (net/core/dev.c:6445)
napi_complete_done (net/core/dev.c:6813)
gro_cell_poll (net/core/gro_cells.c:74)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 )
__local_bh_enable_ip (kernel/softirq.c:450)
tun_get_user (drivers/net/tun.c:1986 (discriminator 1))
tun_chr_write_iter (drivers/net/tun.c:2032)
The issue is completely latent until qdisc read transport header in
commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()").
The crash requires four conditions to line up:
1. The incoming packet is encapsulated and carries GSO metadata. The outer
transport header offset is stored in skb->transport_header while the
packet is still in the outer tunnel context.
2. The tunnel receiver strips the outer headers. skb->data is advanced to
the inner frame, but skb->transport_header is left pointing to the
now-removed outer L4 header, so it becomes a negative offset relative to
the new data.
3. The inner frame is not delivered to the local IP stack. Instead, it
is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and
the transport header is not reset to the inner L4 offset.
4. The forwarding path calls __dev_queue_xmit(), which enters
qdisc_pkt_len_segs_init(). That function computes the GSO header length
from skb_transport_offset(skb). Because the offset is negative, the
unsigned cast overflows and pskb_may_pull(skb, hdr_len +
sizeof(struct tcphdr)) reads past the end of the skb, triggering a
KASAN fault or page fault.
The issue specifically requires GSO packets (shinfo->gso_size != 0), which
are processed/aggregated through gro_cells. Fix this by clearing
transport_header to the ~0U sentinel in gro_cell for all tunnnel driver.
GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject dev-bound-only programs on other devices
__bpf_offload_dev_match() falls back to comparing offdev pointers after an
exact netdev mismatch. Bound-only programs normally have NULL offdevs, so
unrelated netdevs compare equal. A bound-only program on an
offload-registered netdev can instead inherit a real offdev and match a
sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use
bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs
specialized for the bound driver on the target driver's xdp_buff. Running a
veth-bound program on tun reads beyond tun's bare stack xdp_buff as a
veth_xdp_buff.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673)
Call Trace:
...
tun_build_skb (drivers/net/tun.c:1739)
tun_get_user (drivers/net/tun.c:1856)
tun_chr_write_iter (drivers/net/tun.c:2091)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Restrict non-offloaded programs to exact netdev matches and retain the
shared-offdev fallback only for genuinely offloaded multi-port programs. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xdp_rcv (drivers/net/veth.c:941)
veth_poll (drivers/net/veth.c:986)
__napi_poll (net/core/dev.c:7787)
net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007)
handle_softirqs (kernel/softirq.c:645)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use array_map_meta_equal for percpu array inner map replacement
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected. |
