| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in
---truncated--- |
| Improper certificate validation in gnutls v3.8.13 causes the application to reject legitimate certificates for valid users, leading to a Denial of Service (DoS). |
| IBM MQ could allow an authenticated attacker to cause a denial of service due to improper validation of RFH2 message header fields in queued publish/subscribe operations. |
| An issue in gnutls v3.8.13 causes legitimate CA certificates to be rejected, leading to a Denial of Service (DoS). |
| A weakness has been identified in MemTensor memmy-agent up to 1.0.9/1.1.1/1.2.2. The impacted element is the function requireAdminWrite of the file Memory/src/server/http.ts of the component Memory Service. This manipulation causes resource consumption. Remote exploitation of the attack is possible. The attack is considered to have high complexity. The exploitability is regarded as difficult. The exploit has been made available to the public and could be used for attacks. The exploit is partially overstated. While "POST /api/v1/admin/shutdown" accepts unauthenticated requests when no token is configured, it’s designed for local use and later received cross-origin fixes. Unauthenticated endpoint exposure is confirmed; browser-triggered DoS remains likely but depends on specific browser behavior. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl()
virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the
drm_gem_handle_create() error path instead of dropping the reference it
owns, so obj->funcs->free() never runs and the virtio_gpu_object, its
pages and sg table, the resource id and the host-side resource are
leaked.
Use drm_gem_object_put() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: flush skb_defer_nodes in dev_cpu_dead()
When a CPU goes offline, dev_cpu_dead() drains its softnet queues
(completion_queue, output_queue, poll_list, process_queue, and
input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched.
If oldcpu goes offline while holding pending skbs in its
skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI
threshold, or if the IPI races with CPU teardown), those skbs remain
stranded until oldcpu is brought back online. If any of these skbs
hold page_pool fragments, page_pool_destroy() will stall indefinitely
waiting for inflight pages to be returned when a netdev or driver is
torn down while oldcpu is offline.
Additionally, if smp_call_function_single_async() fails in
kick_defer_list_purge() because the target CPU went offline, reset
defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the
CPU comes back online.
Also, if oldcpu was the last online CPU on its NUMA node, drain that
node's slot across all CPUs so no skbs deferred from that node remain
stranded on idle remote CPUs (or if the node itself is subsequently
offlined).
Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and
whether the caller migrated CPUs after llist_add(), flushing the node
list if so, to close the preemption TOCTOU race against CPU/node
teardown. |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. |
| Gitea's initial GitLab migration version probe uses an HTTP client without a timeout and does not attach the migration task's cancellation context. An authenticated user who can start migrations can target an attacker-controlled server that keeps the response open indefinitely. The request continues after task cancellation and can exhaust the migration worker pool, preventing other migrations from progressing. |
| svg-sanitizer is a PHP SVG/XML sanitizer. Prior to 1.0.0, Resolver::processReferences() in src/ElementReference/Resolver.php builds the SVG <use> reference graph with a case-sensitive href attribute predicate before cleanHrefAttributes() normalizes mixed-case names. An attacker can provide xlink:HrEf on nested <use> elements so the graph omits those references, after which the sanitizer converts the attribute to canonical xlink:href and returns the live nesting structure without applying the useNestingLimit protection. A consuming application that renders the sanitized SVG can therefore be exposed to the resource exhaustion that control is designed to prevent. This issue is fixed in version 1.0.0. |
| A vulnerability was found in AUTOMATIC1111 stable-diffusion-webui up to 1.10.1. This impacts the function read_metadata_from_safetensors of the file modules/sd_models.py of the component Metadata Extraction. The manipulation of the argument header length field results in allocation of resources. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, deps/amqp10_common/src/amqp10_binary_parser.erl materializes each element of AMQP 1.0 arrays whose shared constructor has zero width, while limiting only the number of elements in each array and not the aggregate arrays in a frame. After completing SASL authentication, a low-privilege client can send an ordinary frame containing many individually permitted arrays, causing a small frame to expand into a very large reader-process heap before later frame validation or authorization. Because deps/rabbit/src/rabbit_amqp_reader.erl clears the pre-authentication max_heap_size guard after login, repeated or concurrent frames can trigger the node-wide memory alarm, block publishers, or exhaust broker memory. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| Gitea's OneDev migration downloader reads the entire remote version response into memory without a size limit and uses a client without a timeout. An authenticated user who can start a repository migration can direct it to an attacker-controlled OneDev-compatible server returning an oversized or never-ending response. This can consume memory and hold migration workers, impairing service availability. |
| The MCP Python SDK, called mcp on PyPI, is a Python implementation of the Model Context Protocol (MCP). From 1.8.0 until 1.30.0 and 2.2.0, stateful Streamable HTTP servers, including FastMCP, MCPServer, Server.streamable_http_app(), and StreamableHTTPSessionManager, retain session entries without an idle expiration or aggregate session-count limit. DELETE, refused opening requests, and completed sessions do not reliably discard their entries, and each entry can retain parsed initialize parameters. A client that can reach the endpoint can therefore create ordinary short requests that grow server memory without bound until restart. Stateless HTTP, stdio, and SSE transports are not affected. This issue is fixed in versions 1.30.0 and 2.2.0. |
| Gitea parses Alpine package uploads before enforcing package-size quotas and does not bound the decompressed .PKGINFO data or its dependency and provides entry counts. An authenticated user with package-publish permission can upload a small, highly compressed archive that causes disproportionately large memory allocations during parsing and metadata generation. On memory-constrained deployments, this can terminate the process or otherwise disrupt availability. |
| Gitea's Swift package parser limits each manifest to 128 KiB but does not limit the number of manifests or their aggregate size before reading them into memory. An authenticated user with package-publish permission can upload a highly compressed archive containing many manifests, causing allocations far larger than the uploaded archive. This can exhaust memory, terminate the process, or cause request failures. |
| A denial of service vulnerability exists in the XML parsing of multiple versions of OpenNMS Meridian and Horizon. OpenNMS parsed XML without an effective limit on entity expansion. A document with a DOCTYPE that declares internal entities can expand to a very large value and exhaust the server memory. An authenticated user with provisioning access can supply such a document through a requisition or foreign-source import, which includes a remote requisition URL that the server fetches and parses. Both deeply nested entities and a single large entity referenced many times cause the memory exhaustion. The fix caps the number of entity expansions for all XML parsing and rejects any DOCTYPE in requisition and foreign-source XML.
The solution is to upgrade to Meridian 2024.3.14, 2025.0.11, 2026.0.1 and Horizon 36.0.5 or newer. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet. |
| OpENer v2.3.0 / commit 76b95cf contains an out-of-bounds read in the unconnected explicit messaging path. This allows a remote attacker to cause a denial of service. |
