| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()
When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: fix use-after-free bugs caused by ax25_ds_del_timer
When the ax25 device is detaching, the ax25_dev_device_down()
calls ax25_ds_del_timer() to cleanup the slave_timer. When
the timer handler is running, the ax25_ds_del_timer() that
calls del_timer() in it will return directly. As a result,
the use-after-free bugs could happen, one of the scenarios
is shown below:
(Thread 1) | (Thread 2)
| ax25_ds_timeout()
ax25_dev_device_down() |
ax25_ds_del_timer() |
del_timer() |
ax25_dev_put() //FREE |
| ax25_dev-> //USE
In order to mitigate bugs, when the device is detaching, use
timer_shutdown_sync() to stop the timer. |
| Use after free in Windows Message Queuing allows an unauthorized attacker to execute code over a network. |
| Acrobat Reader is affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by a Double Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader is affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| An unauthenticated remote code execution vulnerability exists in the Policy Manager console of Akana API Platform. A path normalization discrepancy between the authentication filter and the servlet dispatcher allows a crafted request to bypass authentication and reach an endpoint that evaluates attacker-supplied script code without sandboxing, resulting in arbitrary code execution. Exploitation requires no authentication or user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Hold cpu_buffer::lock when resizing a subbuf
Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page,
hold cpu_buffer->lock to prevent races with
ring_buffer_alloc_read_page() and ring_buffer_free_read_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
debugfs: Fix lockdown check for mmap_prepare
Commit 651fdda8406d ("relay: update relay to use mmap_prepare")
changed the `mmap` file operation to `mmap_prepare` for relayfs, but
the lockdown check in debugfs was not updated accordingly.
This prevents debugfs from being locked down when the kernel is in
integrity mode if a file uses `mmap_prepare` but not `mmap`.
Since the conversion to `mmap_prepare` across the kernel is not yet
complete, update the lockdown check to look for both `mmap` and
`mmap_prepare` to ensure comprehensive coverage. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| Acrobat Reader is affected by a Use After Free vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Use after free in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Services for NFS ONCRPC XDR Driver allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges over a network. |
| Acrobat Reader is affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: write-protect folios during data writeback
commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced
the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a
plain folio_test_dirty() check. Besides clearing the dirty flag,
folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects
the shared mmap PTEs mapping the folio. Note that we still do call
folio_clear_dirty_for_io() later in submit_one_sector() when we clear
dirty on the last sector of the folio (the only sector for non-subpage
cases). But we lost this early call in extent_write_cache_pages().
Without the extra write-protection, a process with the file mmap-ed can
modify a sector while it is being used by writeback in a way that
expects a stable folio (checksumming, compressing, copying, etc...)
without faulting, which manifests as a handful of concrete bugs.
1. For large folios or subpage sectorsize, it is possible to submit a bio
which does not cover the whole folio. When this happens, we will have a
bio in flight for a folio that we have *not* called
folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE
writes (without faulting..) in this window, it can result in
corruptions. If the write arrives while the checksumming or writing itself
is underway, this can result in an invalid checksum and later corruption
reports on read. If the write arrives after checksumming/writing is done
but before the last sector dirty is cleared, then the write is present
in page cache but doesn't affect the dirty tracking and will be lost
when the folio is fully finished being submitted and the dirty bit
is cleared. This results in losing the write even if fsync() is called.
2. For zoned submissions which are done in batch separate from the main
extent_writepage() loop, we also risk csum violations for those
submissions. Zoned writes are clamped to max_zone_append_size and are
not aligned with folios, so a submission can span two folios. The first
folio being processed in extent_write_cache_pages() will call
extent_write_locked_range() which will submit the partial range of the
next folio, while the rest of that folio could still be dirty. So
clearing dirty on the submitted sectors doesn't call
folio_clear_dirty_for_io() and we have the same issue. Since
extent_write_cache_pages() skips these batch submitted folios (they are
already marked for writeback from submission by the preceding folio), we
must add the extra write protection in lock_delalloc_folios().
3. For inline extents this will subtly risk losing writes that happen
after/while we copy the inline extent but before we clear dirty on
the folio.
4. For folios spanning EOF, mmap could tamper with the zeroed bytes past
EOF and cause them to be persisted where future faults would improperly
see them instead of zeros.
5. Finally, for compressed extents, we risk modifying the folios while we
work on compressing them which will result in corrupted compressed data.
Specifically, in run_delalloc_compressed() we queue up work to do
compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which
will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage,
this will always clear the whole folio, safely. For subpage, we risk a
partial clear here as well. In particular, imagine a 2M folio broken up
into 512K chunks of work which might start compression work on one chunk
before all the chunks compress_file_range() workers have gotten far
enough to finish clearing all the dirty bitmaps of the folio and getting
to folio_clear_dirty_for_io(). Large folios on the edges of submission
ranges are similarly at risk to be only partly cleared.
This particular gap was introduced by a second patch in the same series:
commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases")
We cannot simply restore the call to folio_clear
---truncated--- |
