| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a command injection vulnerability in the PAPI protocol (Aruba's access point management protocol) of AOS-8 that could lead to unauthenticated remote code execution by sending specially crafted packets to the affected UDP port. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| An unauthenticated SQL injection vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to obtain and modify sensitive information in the underlying database and to interrupt the normal operation of the affected service. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-8 that could lead to unauthenticated remote code execution. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix napi_disable deadlock when attempting to disable XSK pools
When disabling XSK pools, GVE calls the unlocked versions of
napi_disable and napi_enable. However, the netdev lock has already been
acquired before ndo_bpf is called because GVE supports queue management
ops. Calling the unlocked versions of napi_disable/enable results in a
deadlock when attempting to disable XSK pools, as the thread attempts to
re-acquire a lock it already holds.
Update the NAPI calls to use the locked versions.
This issue was found in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio_mpsse_irq_enable() arms the poll worker before publishing it:
schedule_work() runs before the worker is added to priv->workers. If
gpio_mpsse_disconnect() walks the list in that window it misses the
worker, and once disconnect returns, the USB core frees mpsse_priv
while the orphaned gpio_mpsse_poll() work keeps accessing it, causing
a use-after-free.
Fix this by publishing and arming the worker in one irq_spin
critical section. Teardown walks the same list under irq_spin, so a
worker found on the list is guaranteed to be armed, and
cancel_work_sync() handles it whether it is queued or running.
A worker armed after the disconnect walk would still be missed, so
also set a new priv->dying flag under irq_spin before the teardown
walk, and check it in the same critical section, freeing it via
kfree_rcu() instead when the device is going away, since kfree()
would be called with the IRQ core's raw spinlock held and may sleep
on PREEMPT_RT. schedule_work() is safe to call with irq_spin held,
and the next probe gets a fresh mpsse_priv, so the flag never needs
to be cleared.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: destroy topsrv workqueues before closing connections
tipc_topsrv_stop() closed subscriber connections while the topology
server's send and receive workqueues were still running. Socket
callbacks and subscription events could then queue more work, and
in-flight send/recv work could drop the last connection reference
during the conn_idr walk.
That race produced several teardown failures: refcount_t addition on
0 from conn_get() on a connection whose release was blocked on
idr_lock, a subsequent use-after-free in tipc_conn_close(),
queue_work() on an already destroyed workqueue from the listener
data-ready callback, and an RCU stall in tipc_topsrv_exit_net()
while the walk spun under idr_lock.
Clear srv->listener under idr_lock so it acts as a shutdown flag,
skip queue_work() once it is NULL, destroy the workqueues to flush
in-flight work, and only then close the remaining connections.
Refuse tipc_conn_lookup() after that flag is cleared, and drop
idr_lock when the teardown walk finds no connection, so an
in-flight subscription event cannot pin idr_in_use while the
walk holds the lock.
v3 supersedes the narrower in-thread diff Tung Quang Nguyen
posted on 2026-09-23. It keeps his teardown order and adds the
lookup refusal and the empty-idr unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: reject net_iov in zerocopy receive mapping hints
After copying a readable prefix, receive_fallback_to_copy() asks
tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the
next skb is unreadable, find_next_mappable_frag() passes its net_iov
fragment to can_map_frag().
skb_frag_page() returns NULL for a net_iov, but can_map_frag()
dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP
socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF
fragment reported:
BUG: KASAN: null-ptr-deref in can_map_frag
tcp_zerocopy_receive -> can_map_frag
Kernel panic - not syncing: KASAN: panic_on_warn set
The diagnostic inserted the net_iov directly because the test host has
no devmem-capable NIC. Hardware end-to-end reachability remains untested
and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue.
Reject all net_iov fragments before skb_frag_page(). This covers both
DMABUF and IOURING net_iov types while leaving page-backed checks
unchanged. With the guard, the same queue copied the readable prefix,
returned a 4096-byte skip hint, and completed without a fault. |
| In the Linux kernel, the following vulnerability has been resolved:
strparser: make sure __strp_recv isn't running before tearing down the parser
The comment above strp_done() claims that if strp is stopped,
strp_recv will no longer be called. That's only true if the caller has
a mechanism (eg locking) to guarantee that strp_recv() calls that
started before strp_stop() have completed by the time we call
strp_done().
This adds a dummy lock_sock/release_sock pair to guarantee that any
in-flight strp_recv() (which runs under either bh_lock_sock or
lock_sock, depending if it's called from ->sk_data_ready or strp_work)
has completed.
Only espintcp can be affected by this race condition, but this patch
makes sure no future user of strp can have the bug.
This could crash on strp->sk ("general mode" of strp), but this mode
has been here for 9 years and has never been used. It'll be gone soon,
no point worrying about it.
Switch the stopped/paused/etc bits to u8's to avoid races between
strp_stop() and strp_pause/unpause().
A reproducer has been published and turns the possible UAF into an
exploit [1]. |
| IBM MQ could allow an authenticated attacker to cause a denial of service due to improper validation of offset values in MQOPEN requests. |
| If an attacker can write to the filesystem of a container k8s cluster container, they can plant an exec credential plugin in /etc/kubernetes/admin.conf. kubectl will run that plugin as the macOS host user the next time someone pulls the cluster's kubeconfig onto the host with container k8s write-config or create and then runs kubectl against it — turning filesystem access inside an untrusted Linux container into arbitrary command execution on the host. This vulnerability is addressed in Container version 1.5.0. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Essbase accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:N). |
| A vulnerability in the command line interface of AOS-8 could allow an authenticated remote attacker with high privileges to conduct a server-side request forgery (SSRF) attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
| A vulnerability in the web-based management interface of AOS-8 could allow an unauthenticated adjacent attacker to bypass existing authentication controls and access sensitive information. Successful exploitation could allow an attacker to gain access to some data in a cleartext format possibly exposing other network infrastructure to further compromise. |
| Command injection vulnerabilities exist in the affected interface of AOS-10 that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
