| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields
In check_synth_field(), when a synthetic event field is a stacktrace
(field->is_stack) and the histogram field is not a "long[" stacktrace
array, validation falls through to the generic size and signedness
comparison.
Because parse_synth_field() sets a stacktrace field's type to
"__data_loc unsigned long[]", its size is sizeof(u64) and
synth_field_signed() marks it as signed. Consequently, any 8-byte
signed scalar histogram field passes the fallback check, and its scalar
value is subsequently dereferenced as a kernel stacktrace pointer in
get_field_size() and trace_stack().
Furthermore, checking strstr(hist_field->type, "long[") is insufficient
because tracepoint fields defined with __bitmask() or __rel_bitmask()
also have type "__data_loc unsigned long[]" or "__rel_loc unsigned
long[]", whilst create_hist_field() treats them as 4-byte scalar values
without HIST_FIELD_FL_STACKTRACE.
Propagate HIST_FIELD_FL_STACKTRACE to variable references and field
variables (whilst excluding variable aliases from per-element
stacktrace capture), and reject any mismatch between
HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: revalidate output stream after association connect wait
When message interleaving is enabled, the first send waits for association
establishment before building its data chunks. The wait drops the socket
lock, and handshake processing can reduce the output stream count to the
peer-advertised inbound stream count. sctp_stream_init() then frees the
extension of every removed stream.
The sender resumes with the stream that it checked before the wait. If the
peer removed that stream, sctp_outq_tail() later dereferences its NULL
extension. Fatal-oops policies then panic the host.
KASAN: null-ptr-deref in range [0x38-0x3f]
RIP: sctp_outq_tail+0x49e/0xaa0
Call Trace:
sctp_primitive_SEND
sctp_sendmsg_to_asoc
sctp_sendmsg
A range check alone is insufficient. Stream reconfiguration can grow the
output count again while the lock is released without recreating extensions
freed by the earlier shrink. The stream can then be in range while its
extension remains NULL. The send-buffer wait has the same issue.
Factor the range and extension checks into a helper and repeat both after
each send-path wait that drops the socket lock. Once the lock is
reacquired, the validation remains stable through data creation and
queueing.
If validation fails after the connect wait, the auto-created association is
already established. Return ESRCH so the existing caller path keeps it
under state-machine ownership instead of freeing it directly, which would
leave protocol, counter and socket state inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Check per-CPU register page before mmap
Register-page setup is optional for each CPU. If allocation or
registration fails, mshv_vtl_configure_reg_page() warns and leaves that
CPU's reg_page NULL, but initial context setup continues successfully.
Meanwhile, successful setup on another CPU sets the global
mshv_has_reg_page flag.
mshv_vtl_fault() checks this global flag before selecting the requested
CPU's register page. With mixed setup results across online CPUs, the
check passes even for a CPU with no register page, reaching
get_page(NULL) when userspace faults in that mapping.
Check the selected per-CPU register page before taking its reference and
return VM_FAULT_SIGBUS if it is absent. |
| Heap-based buffer overflow in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to elevate privileges locally. |
| Release of invalid pointer or reference in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| Use after free in Windows Autopilot allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Grids EasyTest – Simplify A/B Testing convertpro allows DOM-Based XSS.This issue affects EasyTest – Simplify A/B Testing: from n/a through 1.0.1. |
| Missing Authorization vulnerability in WP Grids EasyTest – Simplify A/B Testing convertpro allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects EasyTest – Simplify A/B Testing: from n/a through 1.0.1. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows iSCSI allows an authorized attacker to disclose information locally. |
| Improper verification of cryptographic signature in Windows Key Distribution Center allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Storage allows an authorized attacker to elevate privileges locally. |
| Improper certificate validation in PkixNameConstraintValidator in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who controls, or can obtain certificates from, a name-constrained intermediate CA to have certificates accepted during PKIX certification path validation for email addresses, DNS names or URI hosts that lie within excluded subtrees applying to that CA, via an rfc822Name, dNSName or uniformResourceIdentifier name whose host ends with a dot, because names and constraints were compared without first removing the RFC 1034 root-label trailing dot, so a fully qualified host name did not match an excluded subtree for the same host written without the dot. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out. |
