| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope conn->binding slowpath to bound sessions only
When the binding SESSION_SETUP sets conn->binding = true, the flag stays
set after the call so that the global session lookup in
ksmbd_session_lookup_all() can find the session, which was not added to
conn->sessions. Because the flag is connection-wide, the global lookup
path will also resolve any other session by id if asked.
Tighten the global lookup so that the returned session must have this
connection registered in its channel xarray (sess->ksmbd_chann_list).
The channel entry is installed by the existing binding_session path in
ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes
successfully, so this condition is a strict equivalent of "this
connection has been accepted as a channel of this session". Connections
that have not bound to a given session cannot reach it via the global
table.
The existing conn->binding gate for entering the slowpath is preserved
so that non-binding connections keep the fast-path-only behavior, and
the session->state check is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: fix mismatch between power and frequency
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Patchwork: https://patchwork.freedesktop.org/patch/710077/ |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: qdsp6: topology: check widget type before accessing data
Check widget type before accessing the private data, as this could a
virtual widget which is no associated with a dsp graph, container and
module. Accessing witout check could lead to incorrect memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: zero per-item info buffer before handing it to visitors
rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a
caller-allocated on-stack u64 buffer to a per-connection visitor and
then copy the full item_len bytes back to user space via
rds_info_copy() regardless of how much of the buffer the visitor
actually wrote.
rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only
write a subset of their output struct when the underlying
rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl
and the two GIDs via explicit memsets). Several u32 fields
(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,
cache_allocs) and the 2-byte alignment hole between sl and
cache_allocs remain as whatever stack contents preceded the visitor
call and are then memcpy_to_user()'d out to user space.
struct rds_info_rdma_connection and struct rds6_info_rdma_connection
are the only rds_info_* structs in include/uapi/linux/rds.h that are
not marked __attribute__((packed)), so they have a real alignment
hole. The other info visitors (rds_conn_info_visitor,
rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of
their packed output struct today and are not known to be vulnerable,
but a future visitor that adds a conditional write-path would have
the same bug.
Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:
a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,
binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on
any netdev is sufficient), sendto()'s any peer on the same subnet
(fails cleanly but installs an rds_connection in the global hash in
RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,
RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26
bytes of stack garbage including kernel text/data pointers:
0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2
8..39 00 ... gids (memset-zeroed)
40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr)
48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max)
56..59 01 00 08 00 rdma_mr_size (garbage)
60..61 00 00 tos, sl
62..63 00 00 alignment padding
64..67 18 00 00 00 cache_allocs (garbage)
Fix by zeroing the per-item buffer in both rds_for_each_conn_info()
and rds_walk_conn_path_info() before invoking the visitor. This
covers the IPv4/IPv6 IB visitors and hardens all current and future
visitors against the same class of bug.
No functional change for visitors that fully populate their output.
Changes in v2:
- retarget at the net tree (subject prefix "[PATCH net v2]",
net/rds: prefix in the title)
- pick up Reviewed-by tags from Sharath Srinivasan and
Allison Henderson |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
Fix inverted condition that skips frequency change trigger,
causing kernel panics during cpufreq scaling. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| A flaw in Node.js TLS host verification can cause an attacker to bypass certification validation.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.8.0, the Node.js compatibility TCP path checked the permission against the original hostname string before resolution and then did not re-check after resolution. A caller could therefore pass a numeric alias of an IP address (for example the decimal integer 2130706433 or the hex form 0x7f000001, both of which resolve to 127.0.0.1) and reach the denied destination through node:net.connect or node:http.request's { host, port } options form. This vulnerability is fixed in 2.8.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: dummy: fix UMP event stack overread
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition. |
| Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch. |
| TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected. |
| When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: don't kill URBs in interrupt context
Serialization for the TX path was enforced by calling
usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before
a previous URB was completed. usb_tx_block() can be called from
interrupt context (e.g. in the HCD giveback path), so we can't always
use it to kill in-flight URBs.
Prevent sleeping during interrupt context by checking the tx_submitted
anchor for existing URBs. We now return -EBUSY, to indicate there's
a pending request. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: fix queue limit check to include reordered packets
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
