| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: validate beacon length before fixed buffer copy
rsi_prepare_beacon() copies the mac80211 beacon frame after
FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller
than MAX_MGMT_PKT_SIZE after alignment.
Validate the beacon length against the actual tailroom before the copy
and skb_put(). Leave ownership of the management skb with the caller on
error, matching the existing rsi_send_beacon() cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix an off-by-1 boundary check
Before looking at the 11th byte, check the length is big enough. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound dirent name against end of SMB response in cifs_filldir
cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST /
FIND_NEXT response using a length (de.namelen) supplied by the server.
The kmalloc'd SMB response buffer is bounded, but nothing checks that
de.name + de.namelen still lies inside that buffer before the eventual
filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes.
A hostile SMB1 server that returns an oversized FileNameLength in a
directory entry therefore causes memchr() to read past the end of the
response slab buffer. Reachable from any user who can list a directory
on a CIFS mount served by an attacker-controlled server (getdents64()
on the mounted directory):
BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80
Read of size 1 at addr ffff88800e0640cc by task poc/115
Call Trace:
dump_stack_lvl+0x64/0x80
print_report+0xce/0x620
kasan_report+0xec/0x120
memchr+0x71/0x80
filldir64+0x4c/0x6a0
cifs_filldir.constprop.0+0x9bb/0x1e00
cifs_readdir+0x2101/0x3380
iterate_dir+0x19c/0x520
__x64_sys_getdents64+0x126/0x210
do_syscall_64+0x107/0x5a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Pass the end-of-response pointer down to cifs_filldir() and reject
entries whose name would extend past that boundary.
This bug was discovered by Artiphishell's vTriage pipeline, which
generated a userspace reproducer (an emulated hostile SMB1 server plus
a getdents64() client) that reliably triggers the KASAN report on an
unpatched kernel. The fix below was drafted with the Claude coding
assistant; a userspace reproducer is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation
Whiteout objects are used in the upper layer of an OverlayFS to
indicate that the file with this name does not exist in the unified
view, even if it is present in one of the lower layer file systems.
For the userspace implementations of OverlayFS (fuse-overlayfs),
whiteout objects can be created from userspace as well:
* mknod(2) with S_IFCHR and makedev(0, 0)
* renameat2(2) with RENAME_WHITEOUT,
creating the whiteout in the old place of the moved file.
This commit guards whiteout creation in both of these cases with
LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered
character devices and are not bound to a driver.
LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a
whiteout object: creating one is the only S_IFCHR creation that the VFS
exempts from CAP_MKNOD, so it is as unprivileged as creating a regular
file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and
LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that
expose a kernel interface [1].
For the mknod(2) case, introduce a Landlock erratum. The creation of
whiteout objects through mknod(2) was previously guarded using
LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using
LANDLOCK_ACCESS_FS_MAKE_REG.
For the renameat2(2) case, fix a bug: Before this commit, renameat2(2)
with RENAME_WHITEOUT would create a directory entry even when all
LANDLOCK_ACCESS_FS_MAKE_* rights were denied.
This does not affect normal renames within layered OverlayFS mounts:
When doing a regular rename() on a mounted fuse-overlayfs, it is the
fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT,
and only the Landlock domain of that daemon is checked there.
Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Depends-on: fe72ce6710cb ("landlock: Add errata documentation section")
[mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and
add link(2) to the user doc] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ss - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard __get_user acesss with access_ok for uprobe_multi data
As reported by sashiko [1] we need to use access_ok to check the user
space data bounds before we use __get-user to get it.
[1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ |
| Stack Overflow vulnerability in Apache Directory LDAP API.
Before binding, a client can send a deeply nested search filter that overflows the stack in the server's decoder.
This issue affects Apache Directory LDAP API: from 1.2.0 before 1.2.9.
Users are recommended to upgrade to version 1.2.9, which fixes the issue. |
| Improper Access Control vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fixes the issue.
This CVE supersedes CVE-2026-41920, whose record listed the affected 9.x versions as 9.0.0 through 9.1.14 and the fixed version as 9.1.15. All 9.2.x releases before 9.2.15 are affected. |
| In JetBrains TeamCity before 2026.2,
2026.1.4,
2025.11.8 administrator account takeover was possible via password reset |
| Improper handling of highly compressed data (data amplification), Function call with incorrectly specified arguments, Improper validation of specified quantity in input vulnerability in Apache Thrift py bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Heap-based buffer overflow vulnerability in Apache Thrift C++ THeaderTransport.
When an application enables the ZLIB transform for the frames it sends, THeaderTransport::transform() copies the compressed frame into the write buffer without making sure it fits. Data that does not compress, such as content a remote peer supplied, grows under compression, so the copy writes past the end of the heap buffer by an amount that grows with the size of the frame, and for large frames it also reads past the end of the transform buffer.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Out-of-bounds read in SQL Server allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. |
| Allocation of resources without limits or throttling, Integer overflow or wraparound, Heap-based buffer overflow vulnerability in Apache Thrift.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Stack-based Buffer Overflow, Integer Overflow or Wraparound vulnerability in Apache Thrift php bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| A weakness has been identified in GPAC up to 26.07.0. Affected by this issue is the function gf_dash_resolve_url of the file src/media_tools/dash_client.c of the component DASH Client. This manipulation causes buffer overflow. The attack is possible to be carried out remotely. Upgrading to version abi-16.26 can resolve this issue. Patch name: 4c8e26f278ff63eec57968f7bc696f604bb0cffd. It is recommended to upgrade the affected component. |
| Uncaught exception, Improper validation of specified quantity in input, Improperly controlled modification of object prototype attributes ('prototype pollution') vulnerability in Apache Thrift nodejs bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
