| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: avoid accessing metadata when pointer is invalid in object_err()
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix invalid accesses to ceph_connection_v1_info
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
syzbot reported the splat below without a repro.
In the splat, a single thread calling bt_accept_dequeue() freed sk
and touched it after that.
The root cause would be the racy l2cap_sock_cleanup_listen() call
added by the cited commit.
bt_accept_dequeue() is called under lock_sock() except for
l2cap_sock_release().
Two threads could see the same socket during the list iteration
in bt_accept_dequeue():
CPU1 CPU2 (close())
---- ----
sock_hold(sk) sock_hold(sk);
lock_sock(sk) <-- block close()
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- refcnt by bt_accept_enqueue()
release_sock(sk)
lock_sock(sk)
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- last refcnt
bt_accept_unlink(sk) <-- UAF
Depending on the timing, the other thread could show up in the
"Freed by task" part.
Let's call l2cap_sock_cleanup_listen() under lock_sock() in
l2cap_sock_release().
[0]:
BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995
CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:356 [inline]
release_sock+0x21/0x220 net/core/sock.c:3746
bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312
l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451
l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x3ff/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2accf8ebe9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f
R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c
R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490
</TASK>
Allocated by task 5326:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4365 [inline]
__kmalloc_nopro
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync()
BUG: kernel NULL pointer dereference, address: 00000000000002ec
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc]
...
Call Trace:
<TASK>
smcr_buf_map_link+0x211/0x2a0 [smc]
__smc_buf_create+0x522/0x970 [smc]
smc_buf_create+0x3a/0x110 [smc]
smc_find_rdma_v2_device_serv+0x18f/0x240 [smc]
? smc_vlan_by_tcpsk+0x7e/0xe0 [smc]
smc_listen_find_device+0x1dd/0x2b0 [smc]
smc_listen_work+0x30f/0x580 [smc]
process_one_work+0x18c/0x340
worker_thread+0x242/0x360
kthread+0xe7/0x220
ret_from_fork+0x13a/0x160
ret_from_fork_asm+0x1a/0x30
</TASK>
If the software RoCE device is used, ibdev->dma_device is a null pointer.
As a result, the problem occurs. Null pointer detection is added to
prevent problems. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
The E810 device has support for a "low latency" firmware interface to
access and read the Tx timestamps. This interface does not use the standard
Tx timestamp logic, due to the latency overhead of proxying sideband
command requests over the firmware AdminQ.
The logic still makes use of the Tx timestamp tracking structure,
ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx
timestamps complete.
Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker
is initialized before its first access. This results in NULL dereference or
use-after-free bugs similar to the following:
[245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000
[245977.278774] RIP: 0010:_find_first_bit+0x19/0x40
[245977.278796] Call Trace:
[245977.278809] ? ice_misc_intr+0x364/0x380 [ice]
This can occur if a Tx timestamp interrupt races with the driver reset
logic.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix lockdep assertion on sync reset unload event
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add error handling for old state CRTC in atomic_disable
Introduce error handling to address an issue where, after a hotplug
event, the cursor continues to update. This situation can lead to a
kernel panic due to accessing the NULL `old_state->crtc`.
E,g.
Unable to handle kernel NULL pointer dereference at virtual address
Call trace:
mtk_crtc_plane_disable+0x24/0x140
mtk_plane_atomic_update+0x8c/0xa8
drm_atomic_helper_commit_planes+0x114/0x2c8
drm_atomic_helper_commit_tail_rpm+0x4c/0x158
commit_tail+0xa0/0x168
drm_atomic_helper_commit+0x110/0x120
drm_atomic_commit+0x8c/0xe0
drm_atomic_helper_update_plane+0xd4/0x128
__setplane_atomic+0xcc/0x110
drm_mode_cursor_common+0x250/0x440
drm_mode_cursor_ioctl+0x44/0x70
drm_ioctl+0x264/0x5d8
__arm64_sys_ioctl+0xd8/0x510
invoke_syscall+0x6c/0xe0
do_el0_svc+0x68/0xe8
el0_svc+0x34/0x60
el0t_64_sync_handler+0x1c/0xf8
el0t_64_sync+0x180/0x188
Adding NULL pointer checks to ensure stability by preventing operations
on an invalid CRTC state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Clear the scratch_pt pointer on error
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
(cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8) |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Validate i_depth for exhash directories
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: increase scan_ies_len for S1G
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid
Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP
isn't valid, e.g. because KVM is running with nrips=false. SVM must
decode and emulate to skip the instruction if the CPU doesn't provide the
next RIP, and getting the instruction bytes to decode requires reading
guest memory. Reading guest memory through the emulator can fault, i.e.
can sleep, which is disallowed since the fastpath handlers run with IRQs
disabled.
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 30580
hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm]
hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0
softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE
Tainted: [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xb0
__might_resched+0x271/0x290
__might_fault+0x28/0x80
kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm]
kvm_fetch_guest_virt+0x92/0xc0 [kvm]
__do_insn_fetch_bytes+0xf3/0x1e0 [kvm]
x86_decode_insn+0xd1/0x1010 [kvm]
x86_emulate_instruction+0x105/0x810 [kvm]
__svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd]
handle_fastpath_invd+0xc4/0x1a0 [kvm]
vcpu_run+0x11a1/0x1db0 [kvm]
kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm]
kvm_vcpu_ioctl+0x578/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x8a/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f479d57a94b
</TASK>
Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM:
Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with
different justification (KVM now grabs SRCU when skipping the instruction
for other reasons). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O
When completing emulation of instruction that generated a userspace exit
for I/O, don't recheck L1 intercepts as KVM has already finished that
phase of instruction execution, i.e. has already committed to allowing L2
to perform I/O. If L1 (or host userspace) modifies the I/O permission
bitmaps during the exit to userspace, KVM will treat the access as being
intercepted despite already having emulated the I/O access.
Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.
Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the
intended "recipient") can reach the code in question. gp_interception()'s
use is mutually exclusive with is_guest_mode(), and
complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with
EMULTYPE_SKIP.
The bad behavior was detected by a syzkaller program that toggles port I/O
interception during the userspace I/O exit, ultimately resulting in a WARN
on vcpu->arch.pio.count being non-zero due to KVM no completing emulation
of the I/O instruction.
WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]
Modules linked in: kvm_intel kvm irqbypass
CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]
PKRU: 55555554
Call Trace:
<TASK>
kvm_fast_pio+0xd6/0x1d0 [kvm]
vmx_handle_exit+0x149/0x610 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]
kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0x5d/0xc60
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown() |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
The drm_atomic_get_new_connector_state() can return NULL if the
connector is not part of the atomic state. Add a check to prevent
a NULL pointer dereference.
This follows the same pattern used in dpu_encoder_update_topology()
within the same file, which checks for NULL before using conn_state.
Patchwork: https://patchwork.freedesktop.org/patch/665188/ |
| In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: clear page table entries at destroy_args()
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_stru
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Correct tid cleanup when tid setup fails
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |