| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect Calculation vulnerability in VillaTheme CURCY woo-multi-currency allows Integer Attacks.This issue affects CURCY: from n/a through 2.2.17. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts
When an NFSv4 filesystem exported with security_label is mounted a
second time, sget_fc() returns the existing superblock and
nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the
superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an
early exit without setting SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags. nfs_get_root() then sees kflags without
SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on
the shared nfs_server, silently disabling per-file labeling for both
the new and the original mount.
Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS
on reused superblock") fixed the same problem in
selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain
second mount now goes through sb_set_mnt_opts rather than
sb_clone_mnt_opts, so it needs the same treatment: on both
SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags when the superblock was already using
SECURITY_FS_USE_NATVE. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not warn on route notification size race
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop route notification sizing when nexthop group shrinks
Commit 680aea08e78c ("net: ipv4: Emit notification when fib
hardware flags are changed") added an RCU-only fib_nlmsg_size() call
for asynchronous hardware flag notifications.
fib_nlmsg_size() checks fib_info_num_path() before each iteration,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences
it.
Stop sizing when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop PMTU walk when nexthop group shrinks
Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if
multipath enabled") made __ip_rt_update_pmtu() update every path.
For nexthop objects, fib_info_num_path() and fib_info_nhc()
independently load nh->nh_grp. RCU protects each group's lifetime but
does not make the loads observe the same group. If replacement shrinks
the group after the loop accepts an index, fib_info_nhc() returns NULL
and update_or_create_fnhe() dereferences it.
A deterministic probe only widened the existing window between the real
operations. On v7.2, an RTM_NEWNEXTHOP replacement published a
one-member group after the PMTU reader accepted index 1 from a two-member
group, producing:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: update_or_create_fnhe+0x45/0x15b0
Stop when the indexed path is absent. Groups are dense, so no later
index exists in that snapshot. The same real-writer window completed
114,423 PMTU iterations without an oops with this check. A reproducer
is available on request.
Replacement requires CAP_NET_ADMIN in the network namespace. Where
unprivileged user namespaces are permitted, a local user can obtain it
in a new user and network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry
With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until
an MPWQE is refilled. If XSK allocation then returns -ENOMEM,
actual_wq_head is not advanced and a later NAPI poll retries the same
WQE.
mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On
retry it can therefore call xsk_buff_free() again through stale pointers
after the frames have returned to the XSK pool and been reallocated.
Set all skip_release_bitmap bits in the common error path of
mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A
successful allocation already clears the bitmap after replacing every
buffer, so retries become idempotent without changing the success path.
Fault injection forced three consecutive failures for one selected MPWQE.
Both an early allocation failure and a partial 8-of-16-buffer unwind
released the original 16 XSK buffers only once. Each error left a full
bitmap, the following NAPI retry skipped the release, and a later
successful allocation cleared it. A 20-second AF_XDP zero-copy pressure
run exercised 1,575,262 buffer allocation failures without invalid
descriptors, WQE errors, or kernel warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
readdir: take no inode lock on an immutable directory
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock. |
| An unauthenticated path traversal vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation of this vulnerability could allow an unauthenticated adjacent attacker to read, modify, and delete files on the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| @pdfme/common from 5.5.10 before 6.2.6 contains a server-side request forgery vulnerability that allows attackers to bypass the isUrlSafeToFetch denylist in getB64BasePdf. Attackers can supply basePdf URLs using IPv4-mapped IPv6, [::], NAT64 or localhost alias hostnames to read loopback, internal or cloud metadata responses through generated documents. |
| i18next-http-backend 4.0.2 contains an incomplete fix in interpolateUrl() that allows attackers to redirect translation requests by supplying an ns value starting with a slash. Attackers controlling the namespace value can form a protocol-relative URL in loadPath or addPath templates to load attacker-hosted translations, enabling UI content injection and cross-site scripting. |
| Signal K Server from 2.28.0-beta.2 before 2.34.0 contains a server-side request forgery vulnerability in the App Store icon fetcher that trusts absolute signalk.appIcon URLs. Attackers publishing npm packages with Signal K keywords can make servers request loopback, vessel network, or cloud metadata endpoints, storing image-typed responses served back via the admin UI. |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 48.0.7 and 49.0.4, lowering a host-created component-model stream or future into a guest can omit a required payload-type check after the value passes through guest code and returns through StreamAny, FutureAny, Val::Stream, Val::Future, or an equivalent typed reader. A malicious guest that controls exported function types or returned values can cause the host to pass the type-erased value to a guest expecting a different payload type, which panics the Wasmtime host. This issue is fixed in versions 48.0.7 and 49.0.4. |
| Vulnerability in the Oracle Identity Manager product of Oracle Fusion Middleware (component: REST WebServices). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Identity Manager. Successful attacks of this vulnerability can result in takeover of Oracle Identity Manager. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| An authentication bypass vulnerability in the underlying operating system of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system leading to complete system compromise. |
| There is a command injection vulnerability in the PAPI protocol of AOS-10 that could lead to unauthenticated remote code execution by an adjacent attacker sending specially crafted packets. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
