| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: do not copy out an uninitialised init response
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
0, private->bInterfaceNumber,
step0_resp, private->step0_resp_size);
if (err < 0)
return err;
usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or
zero-length data stage completes with status 0 and snd_usb_ctl_msg()
returns a small actual_length. The only check is err < 0, so a short
transfer is accepted as success.
snd_usb_ctl_msg() copies the full size back unconditionally:
buf = kmemdup(data, size, GFP_KERNEL);
...
memcpy(data, buf, size);
Bytes the device never wrote are therefore restored into resp unchanged
and copied to userspace. step0_resp_size and step2_resp_size are each
validated only to 1..255, so the caller also picks the slab cache, from
kmalloc-8 up to kmalloc-512.
On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data
stage, s0 = s2 = 255:
# init_on_alloc off, no spray
step0 window [0,255): nonzero=94/255
000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01
010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff
# same kernel, kmalloc-512 pre-seeded with an 8-byte tag
step0 window [0,255): nonzero=219/255 tagbytes=232
# identical run, init_on_alloc=1
step0 window [0,255): nonzero=0/255 tagbytes=0
# all three runs
step2 window [255,510): device words matched=62/62
a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address
ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is
exactly the step-0 region.
Zero the buffer, and require the step-0 transfer to deliver the full
step0_resp_size bytes so a short data stage is reported as an error.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: move ext4_percpu_param_init() before ext4_mb_init()
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| An information leakage vulnerability exists in the Endpoint DLP component (epdlpdrv.sys) of Netskope Client for Windows prior to version R141. An internal communication channel used by the user-space hook DLL to pass messages through the kernel driver to the daemon lacked proper token-based message validation, allowing local unprivileged processes to send unauthorized queries. Additionally, a reply buffer used by the port message handler was not properly initialized before returning data, leaking residual kernel pool memory from prior allocations. A local unprivileged attacker could exploit this vulnerability to enumerate DLP configuration and feature flags, extract live session tokens, and read kernel memory fragments from other users' operations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure nfsd_file_do_acquire() does not use a non-opened file
->atomic_open is permitted to return success without actually opening
the file. It indicates this by calling finish_no_open().
This means dentry_create() can return a file which hasn't been opened.
This is extremely unlikely as ->atomic_open handlers typically
use finish_no_open() only for already existing files, and dentry_create()
isn't called in that case, and the parent being locked should prevent
races.
However out of an abundance of caution it seems wise to teach nfsd to
only use the file returned by dentry_create() if FMODE_OPENED is set,
indicating that it has in fact been opened. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: adi: initialize the lock before enabling interrupts
adi_i3c_master_probe() requests the IRQ and unmasks REG_IRQ_PENDING_CMDR
before the controller's IBI state, transfer queue list and transfer
queue lock are initialized. A pending CMDR interrupt can therefore run
adi_i3c_master_irq() and take master->xferqueue.lock before the dynamic
lock has been initialized.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the probe ordering and the IRQ path
adi_i3c_master_probe() -> adi_i3c_master_irq() -> xferqueue.lock, with a
pending CMDR interrupt arriving after REG_IRQ_PENDING_CMDR is unmasked.
Lockdep reported:
INFO: trying to register non-static key.
you didn't initialize this object before use?
lock_acquire+0xbb/0x290
_raw_spin_lock_irqsave+0x36/0x60
adi_i3c_master_irq+0x32/0x56 [vuln_msv]
adi_i3c_master_probe+0x5a/0xf47 [vuln_msv]
Initialize the transfer queue and IBI state before requesting and
unmasking the IRQ. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Update HDCP Config In Transition State
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created. |
| ws is an open source WebSocket client and server for Node.js. Prior to 8.20.1, the websocket.close() implementation is vulnerable to uninitialized memory disclosure when a TypedArray is passed as the reason argument. This vulnerability is fixed in 8.20.1. |
| Use of uninitialized resource in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Uninitialized resource in Codecs in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use of uninitialized resource in Microsoft Office allows an unauthorized attacker to disclose information over a network. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Uninitialized resource in Media in Google Chrome prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| Uninitialized resource in WebGL in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix register corruption from uninitialized cregs on error
compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when
user_regset_copyin() fails. Since cregs is an uninitialized stack
variable, a copyin failure causes uninitialized stack data to be written
into the target task's pt_regs, corrupting its register state and
potentially leaking kernel stack contents.
compat_restore_sigcontext() has the same issue: it calls cregs_to_regs()
even when __copy_from_user() fails, leading to the same corruption of
the signal-returning task's register state on error.
Only call cregs_to_regs() when the user copy succeeds. |
