Export limit exceeded: 413914 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98484 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths. | ||||
| CVE-2026-98487 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mdb: restart port group walk after deletion br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through br_multicast_sg_del_exclude_ports() and unlink other port groups. If the cursor points into one of those groups, the next iteration dereferences a stale cursor and can leave mp->ports pointing at freed memory. A following RTM_GETMDB exposes the dangling pointer: BUG: KASAN: slab-use-after-free in br_mdb_dump Read of size 8 br_mdb_dump rtnl_mdb_dump rtnl_dumpit netlink_dump Reset the cursor to mp->ports after every deletion. The deletion removes at least the selected group, so the restarted walk always makes progress. | ||||
| CVE-2026-98488 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range hw_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-98469 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4, restoring the pre-regression behavior. | ||||
| CVE-2026-98470 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls it for every number the generic code doesn't handle, so ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it under panic_on_warn. The lookup is fed userspace input: return false, and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that number on a host without pKVM. | ||||
| CVE-2026-98490 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98492 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths Fix 3 leaks in macb_alloc() error paths: - Tx buffer allocated but crossing a 4G boundary: Tx leaked. - Rx buffer allocation fails: Tx leaked. - Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked. This is because our error handling calls macb_free(bp) which in turn frees the buffers stored in bp->queues[0], but nothing has been stored in there. Fix by storing allocated buffers into bp->queues[0] ASAP. | ||||
| CVE-2026-98493 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. | ||||
| CVE-2026-98500 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds. | ||||
| CVE-2026-98601 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate device-supplied DMA indices In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer. Additionally, cr_hia is read from a DMA-shared index array also writable by the device; if the device sets cr_hia >= rxq->count, the while-loop never terminates because cr_tia is wrapped via modulo rxq->count and can never equal an out-of-range cr_hia. Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia in the TX path. Log invalid values with bt_dev_err before returning. | ||||
| CVE-2026-98605 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach When the Exynos DSI driver was generalized into samsung-dsim, the TE GPIO acquisition was switched from gpiod_get_optional() to devm_gpiod_get_optional() while keeping the matching gpiod_put() calls. That combination is wrong for a managed descriptor. However, dropping the puts and keeping the managed get is also wrong: samsung_dsim_register_te_irq() runs from the DSI host attach callback, and host detach/reattach can happen without destroying the device that owns the managed action. A second attach would then request the GPIO again without having released it. Switch back to a non-managed gpiod_get_optional() and keep the explicit gpiod_put() on the request_irq() error path and in samsung_dsim_unregister_te_irq(). [Luca: remove unnecessary comment] | ||||
| CVE-2026-98472 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path, i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV VM if its state is intra-host migrated. Alternatively, the mask could be freed in sev_migrate_from() when "converting" the source VM, but that gets annoying because ideally KVM would nullify the mask to guard against UAF, and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y. Freeing the mask during sev_migrate_from() is also not robust against other KVM bugs, though that's kind of a moot point since any such bugs would show up even if sev->active is never set. I.e. KVM must get that side of things correct. But, that's not a great reason to add more code just to make things marginally less robust. | ||||
| CVE-2026-98474 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing device lock in zpci_report_status() When pdev is non-NULL, zpci_report_status() accesses the device's driver. To get a consistent state matching the recovery, the device lock needs to be held. Do so by expanding the existing device lock critical section. The lock only needs to be held when the pdev is non-NULL, so extract the pdev-specific reporting into a helper function which also adds a lockdep assertion to detect calls without the device lock held. | ||||
| CVE-2026-98607 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98615 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring() writes AW_CFG with FLUSH set and everything else, BME included, cleared. Clearing BME halts the device's writes to the host but leaves the staged requests parked in the PUL write pipeline rather than draining them, so on the write path FLUSH alone never terminates the outstanding requests and the flush the firmware waits on never completes. Add the FLUSH_MODE definition and set both bits so the staged writes drain out of the pipeline on their own. BME stays cleared, so nothing lands on the host; it is restored later in fbnic_mbx_init_desc_ring() when the ring is rebuilt, once the outstanding writes are gone. The read path is unaffected. AR_CFG has no equivalent mode bit and AR_FLUSH terminates the outstanding reads by itself, so it is left as is. Both writes remain plain stores rather than read-modify-writes. That is deliberate: the matching write in fbnic_mbx_init_desc_ring() restores BME and the TLP attributes, and clears both flush bits as a side effect. | ||||
| CVE-2026-98623 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update If list_for_each_entry() exits without hitting a break then "pstate" is not a valid pstate pointer. Introduce a "found" variable instead. The check is reachable from userspace: nvkm_clk_ustate_update() takes the pstate id straight from the 'pstate' debugfs file, so requesting an id that is not in clk->states - or any id at all when the perf tables are broken and the list is empty - makes the pstate->pstate != req test dereference the list head cast to a struct nvkm_pstate, which is an out-of-bounds read. [Francesco: rebased on drm-misc-next, expanded the commit message] | ||||
| CVE-2026-98629 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix manual hash table handle IDR aliasing A u32 hash table created with an explicit handle ('tc filter add ... handle 801: u32 divisor N') keys its IDR entry on the raw handle, while the destroy paths free it under handle2id(handle). The two key domains disagree for handles in the 0x800..0xFFF htid range: handle2id() folds them back into the auto-allocated id space (1..0x7FF). A manual table therefore leaves its raw-keyed IDR entry unreachable on delete (a permanent leak), and its delete can drop the idr entry of an unrelated live auto table. A later auto allocation can then hand out a handle that aliases the live manual table; u32_lookup_ht() first-match routes lookups and TCA_U32_LINK for that htid to the wrong table. Key the divisor-path alloc on handle2id(handle) so allocation and removal share one key domain. A manual handle that maps onto an id already in use is rejected with -ENOSPC, and auto allocation skips ids held by live manual tables. Conditions to recreate: ip link add test0 type dummy tc qdisc add dev test0 clsact tc filter add dev test0 ingress protocol ip pref 1 \ handle 801: u32 divisor 16 tc filter add dev test0 ingress protocol ip pref 2 u32 divisor 16 tc -d filter show dev test0 ingress | grep 'fh 801:' # unpatched: two live tables with handle 0x80100000 (the pref 2 root # hnode is auto-allocated id 1); patched: the auto hnode takes id 2. Also tested with a poc with a live u32 table on the block, add/delete a manual table 'handle 901: u32 divisor 1' twice; unpatched, the re-add fails with -ENOSPC because the raw key leaked on the first delete. | ||||
| CVE-2026-98540 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot. | ||||
| CVE-2026-98631 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. | ||||
| CVE-2026-98637 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE, which is left set. Later vCPUs on that VM then skip the SVE setup and register with a NULL sve_state, which the guest's first FP access hands to sve_load_state(). Return the error without touching vcpu_features. | ||||