Export limit exceeded: 417713 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16195 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34971 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 7.8 High |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-34987 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 9.9 Critical |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-35195 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 5.4 Medium |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2025-12052 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 7.8 High |
| The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow. | ||||
| CVE-2025-12050 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 7.8 High |
| The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow. | ||||
| CVE-2024-55884 | 2026-04-15 | 9 Critical | ||
| In the Mullvad VPN client 2024.6 (Desktop), 2024.8 (iOS), and 2024.8-beta1 (Android), the exception-handling alternate stack can be exhausted, leading to heap-based out-of-bounds writes in enable() in exception_logging/unix.rs, aka MLLVD-CR-24-01. NOTE: achieving code execution is considered non-trivial. | ||||
| CVE-2025-41236 | 1 Vmware | 3 Esxi, Fusion, Workstation | 2026-04-15 | 9.3 Critical |
| VMware ESXi, Workstation, and Fusion contain an integer-overflow vulnerability in the VMXNET3 virtual network adapter. A malicious actor with local administrative privileges on a virtual machine with VMXNET3 virtual network adapter may exploit this issue to execute code on the host. Non VMXNET3 virtual adapters are not affected by this issue. | ||||
| CVE-2025-48499 | 1 Fujifilm | 8 Apeos 2150, Apeos 2350, Docuprint M115 W and 5 more | 2026-04-15 | 5.3 Medium |
| Out-of-bounds write vulnerability exists in FUJIFILM Business Innovation MFPs. A specially crafted IPP (Internet Printing Protocol) or LPD (Line Printer Daemon) packet may cause a denial-of-service (DoS) condition on an affected MFP. Resetting the MFP is required to recover from the denial-of-service (DoS) condition. | ||||
| CVE-2010-20115 | 2 Arcane Software, Microsoft | 2 Vermillion Ftp Daemon, Windows | 2026-04-15 | N/A |
| Arcane Software’s Vermillion FTP Daemon (vftpd) versions up to and including 1.31 contains a memory corruption vulnerability triggered by a malformed FTP PORT command. The flaw arises from an out-of-bounds array access during input parsing, allowing an attacker to manipulate stack memory and potentially execute arbitrary code. Exploitation requires direct access to the FTP service and is constrained by a single execution attempt if the daemon is installed as a Windows service. | ||||
| CVE-2025-1268 | 2026-04-15 | 9.4 Critical | ||
| Out-of-bounds vulnerability in EMF Recode processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / Generic FAX Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / PDF Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver | ||||
| CVE-2025-41649 | 2026-04-15 | 7.5 High | ||
| An unauthenticated remote attacker can exploit insufficient input validation to write data beyond the bounds of a buffer, potentially leading to a denial-of-service condition for the devices. | ||||
| CVE-2024-45769 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 5.5 Medium |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw allows an attacker to send specially crafted data to the system, which could cause the program to misbehave or crash. | ||||
| CVE-2025-42877 | 1 Sap | 3 Content Server, Internet Communication Manager, Web Dispatcher | 2026-04-15 | 7.5 High |
| SAP Web Dispatcher, Internet Communication Manager (ICM), and SAP Content Server allow an unauthenticated user to exploit logical errors that lead to a memory corruption vulnerability. This results in high impact on the availability with no impact on confidentiality or integrity of the application. | ||||
| CVE-2025-23299 | 1 Nvidia | 2 Bluefield, Connectx | 2026-04-15 | 6.7 Medium |
| NVIDIA Bluefield and ConnectX contain a vulnerability in the management interface that could allow a malicious actor with high privilege access to execute arbitrary code. | ||||
| CVE-2025-5898 | 1 Gnu | 1 Pspp | 2026-04-15 | 5.3 Medium |
| A vulnerability classified as critical has been found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to out-of-bounds write. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-9903 | 1 Canon | 5 Generic Plus Lips4 Printer Driver, Generic Plus Lipslx Printer Driver, Generic Plus Pcl6 Printer Driver and 2 more | 2026-04-15 | 5.9 Medium |
| Out-of-bounds write vulnerabilities in print processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / Generic FAX Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-55118 | 1 Bmc | 1 Control-m/agent | 2026-04-15 | 8.9 High |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | ||||
| CVE-2024-10573 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 6.7 Medium |
| An out-of-bounds write flaw was found in mpg123 when handling crafted streams. When decoding PCM, the libmpg123 may write past the end of a heap-located buffer. Consequently, heap corruption may happen, and arbitrary code execution is not discarded. The complexity required to exploit this flaw is considered high as the payload must be validated by the MPEG decoder and the PCM synth before execution. Additionally, to successfully execute the attack, the user must scan through the stream, making web live stream content (such as web radios) a very unlikely attack vector. | ||||
| CVE-2025-54957 | 1 Dolby | 1 Udc | 2026-04-15 | 9.8 Critical |
| An issue was discovered in Dolby UDC 4.5 through 4.13. A crash of the DD+ decoder process can occur when a malformed DD+ bitstream is processed. When Evolution data is processed by evo_priv.c from the DD+ bitstream, the decoder writes that data into a buffer. The length calculation for a write can overflow due to an integer wraparound. This can lead to the allocated buffer being too small, and the out-of-bounds check of the subsequent write to be ineffective, leading to an out-of-bounds write. | ||||