| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in NUUO Camera up to 20240319 and classified as problematic. This issue affects some unknown processing of the file /deletefile.php. The manipulation of the argument filename leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-258197 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| oidcc is the OpenID Connect client library for Erlang. Denial of Service (DoS) by Atom exhaustion is possible by calling `oidcc_provider_configuration_worker:get_provider_configuration/1` or `oidcc_provider_configuration_worker:get_jwks/1`. This issue has been patched in version(s)`3.1.2` & `3.2.0-beta.3`. |
| go-ethereum (geth) is a golang execution layer implementation of the Ethereum protocol. Prior to 1.13.15, a vulnerable node can be made to consume very large amounts of memory when handling specially crafted p2p messages sent from an attacker node. The fix has been included in geth version `1.13.15` and onwards. |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.
|
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to 3.5.0 and 2.19.5, checking name constraints in X.509 certificates is quadratic in the number of names and name constraints. An attacker who presented a certificate chain which contained a very large number of names in the SubjectAlternativeName, signed by a CA certificate which contained a large number of name constraints, could cause a denial of service. The problem has been addressed in Botan 3.5.0 and a partial backport has also been applied and is included in Botan 2.19.5. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| An issue in taurusxin ncmdump v1.3.2 allows attackers to cause a Denial of Service (DoS) via memory exhaustion by supplying a crafted .ncm file |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| Incorrect access control in the Kafka Connect REST API in the STRIMZI Project 0.41.0 and earlier allows an attacker to deny the service for Kafka Mirroring, potentially mirror the topics' content to his Kafka cluster via a malicious connector (bypassing Kafka ACL if it exists), and potentially steal Kafka SASL credentials, by querying the MirrorMaker Kafka REST API. |
| SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.
|
| Rustix is a set of safe Rust bindings to POSIX-ish APIs. When using `rustix::fs::Dir` using the `linux_raw` backend, it's possible for the iterator to "get stuck" when an IO error is encountered. Combined with a memory over-allocation issue in `rustix::fs::Dir::read_more`, this can cause quick and unbounded memory explosion (gigabytes in a few seconds if used on a hot path) and eventually lead to an OOM crash of the application. The symptoms were initially discovered in https://github.com/imsnif/bandwhich/issues/284. That post has lots of details of our investigation. Full details can be read on the GHSA-c827-hfw6-qwvm repo advisory. If a program tries to access a directory with its file descriptor after the file has been unlinked (or any other action that leaves the `Dir` iterator in the stuck state), and the implementation does not break after seeing an error, it can cause a memory explosion. As an example, Linux's various virtual file systems (e.g. `/proc`, `/sys`) can contain directories that spontaneously pop in and out of existence. Attempting to iterate over them using `rustix::fs::Dir` directly or indirectly (e.g. with the `procfs` crate) can trigger this fault condition if the implementation decides to continue on errors. An attacker knowledgeable about the implementation details of a vulnerable target can therefore try to trigger this fault condition via any one or a combination of several available APIs. If successful, the application host will quickly run out of memory, after which the application will likely be terminated by an OOM killer, leading to denial of service. This issue has been addressed in release versions 0.35.15, 0.36.16, 0.37.25, and 0.38.19. Users are advised to upgrade. There are no known workarounds for this issue. |
| Improper resource management in firmware of some Solidigm DC Products may allow an attacker to potentially control the performance of the resource. |
| In FRRouting (FRR) before 10.3 from 6.0 onward, all routes are re-validated if the total size of an update received via RTR exceeds the internal socket's buffer size, default 4K on most OSes. An attacker can use this to trigger re-parsing of the RIB for FRR routers using RTR by causing more than this number of updates during an update interval (usually 30 minutes). Additionally, this effect regularly occurs organically. Furthermore, an attacker can use this to trigger route validation continuously. Given that routers with large full tables may need more than 30 minutes to fully re-validate the table, continuous issuance/withdrawal of large numbers of ROA may be used to impact the route handling performance of all FRR instances using RPKI globally. Additionally, the re-validation will cause heightened BMP traffic to ingestors. Fixed Versions: 10.0.3, 10.1.2, 10.2.1, >= 10.3. |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. |
| An issue in SunOS Omnios v5.11 allows attackers to cause a Denial of Service (DoS) via repeatedly sending crafted TCP packets. |
| An issue in OneTrust SDK v.6.33.0 allows a local attacker to cause a denial of service via the Object.setPrototypeOf, __proto__, and Object.assign components. NOTE: this is disputed by the Supplier who does not agree it is a prototype pollution vulnerability. |
| An issue in Docker-proxy v18.09.0 allows attackers to cause a denial of service. |
| A flaw was found in NetworkManager. When a system running NetworkManager with DEBUG logs enabled and an interface eth1 configured with LLDP enabled, a malicious user could inject a malformed LLDP packet. NetworkManager would crash, leading to a denial of service. |
| On affected platforms running Arista EOS with BGP Link State configured, BGP peer flap can cause the BGP agent to leak memory. This may result in BGP routing processing being terminated and route flapping. |
| A security issue was discovered in Kubernetes where a large number of container checkpoint requests made to the unauthenticated kubelet read-only HTTP endpoint may cause a Node Denial of Service by filling the Node's disk. |
