| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse OpenJ9 versions up to 0.63, opening a supplied diagnostic dump bundle with the jdmpview tool, or equivalent DTFJ code, may cause the analyst's machine to read an arbitrary local file named inside the bundle and send its contents to an arbitrary remote host. |
| A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page. |
| A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes.
The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied.
A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back. |
| A ThreadX module allocates the control blocks of its kernel objects from the Module Manager's object pool, and can ask for that memory back by address with `txm_module_object_deallocate`. The manager released it whatever was in it, including a control block the kernel was still using. Deallocation is not deletion: the object stays on the created list for its type, a thread stays wherever it was on the ready or suspension lists and stays schedulable, and an active timer stays on the timer list. The byte pool is meanwhile free to hand those same bytes to the next allocation. |
| The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start.
A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on. |
| A ThreadX module reaches a kernel object's delete service through the Module Manager's dispatch layer, which asked one question about the pointer: does the object lie outside the module's own code and data. That is the policy for *using* an object, and using an object a module does not own is supported and intended — `txm_module_object_pointer_get_extended` searches the system's created objects by name and hands back objects the application created and objects other modules created, so that a module can send to a shared queue, take a shared semaphore or get a shared mutex.
Destroying one of those is not sharing it. A module could name any object it had a pointer to and have the privileged dispatcher delete it. |
| The Module Manager's object lookup validated one byte of a memory-protected module's search name and then walked as much of it as the module declared, in privileged mode, with the kernel's preemption count raised. Both lookup dispatchers are affected: the recommended `txm_module_object_pointer_get_extended` is handed a length and does not use it to bound the buffer, and the deprecated `txm_module_object_pointer_get` supplies the largest value a `UINT` can hold, so it removes the bound rather than lacking one.
A module can make the walk unbounded without knowing anything about the memory it reaches, and where the walk reaches memory a privileged read cannot take, the resulting fault leaves the kernel unable to preempt for the rest of the system's life.
Vulnerable functions: `_txm_module_manager_txm_module_object_pointer_get_dispatch`, `_txm_module_manager_txm_module_object_pointer_get_extended_dispatch` (both in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`) and `_txm_module_manager_object_name_compare` (`common_modules/module_manager/src/txm_module_manager_util.c`). |
| One logical thread of a user-mode ThreadX module costs the Module Manager's shared object pool two allocations, not one. The module asks for a `TX_THREAD` control block through `txm_module_object_allocate`; `_txm_module_manager_thread_create` then takes a second allocation of `TXM_MODULE_KERNEL_STACK_SIZE` bytes for the privileged kernel stack that thread's system calls run on, and records it in the control block. Both come from `_txm_module_manager_object_pool` and both are linked onto the module's allocation list.
The Module Manager's thread-delete dispatcher released only the first. The kernel stack stayed allocated until the whole module was stopped, so a module that creates, terminates and deletes threads in a loop — every state transition valid, every service returning `TX_SUCCESS` — removed a fixed block from a finite pool shared by the manager and by every other loaded module, on every cycle, for as long as it stayed loaded. Once the pool is exhausted, no memory-protected module can create any kernel object and no user-mode module thread can be created anywhere in the system.
Vulnerable function: `_txm_module_manager_tx_thread_delete_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| The Module Manager's block-pool create dispatcher proved that two `ALIGN_TYPE` words of the extra-parameter array a memory-protected module supplies lay inside the module's data, and then used indices 0 through 3 of that array.
One of the two unproved words is read by the dispatcher's own buffer check, which takes index 1 as the pool start and index 2 as the length to range-check it over. So the out-of-bounds read is performed by the validation code itself, before the kernel service is reached, and the size the caller's pool start is then validated against is a word the manager has not proved the module owns. The other unproved word is read when the service's argument list is built.
Vulnerable function: `_txm_module_manager_tx_block_pool_create_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block. |
| The X.509 parser in NetX Secure accepts an RSA public key of any size, but every signature-verification path decrypts into fixed-size buffers dimensioned for the `NX_CRYPTO_MAX_RSA_MODULUS_SIZE` default of 4096 bits. A certificate carrying a larger modulus drives an out-of-bounds write past a file-scope static during ordinary certificate-chain verification.
It is reachable pre-authentication. The issuer used for the crypto operation is looked up in the remote, peer-supplied store before the trusted store, so the attacker supplies the oversized key themselves as an intermediate in the chain they present. It triggers on a TLS or DTLS client verifying a malicious server's chain, and on a server performing client-certificate authentication. |
| The Web add-on's HTTP server dereferences and releases an uninitialized pointer when it detects a `Content-Length` underflow while processing a `PUT` request. The condition is reachable by an unauthenticated remote client with a single malformed request. |
| The TLS 1.3 Certificate-message parser in NetX Secure decrements the message length to skip a context byte without first establishing that the message has a byte to skip. A zero-length Certificate message therefore wraps the unsigned length to `0xFFFFFFFF`, which makes the bounds check that follows vacuous and sends the parser reading past the session packet buffer.
The trigger is a four-byte handshake header and requires no cryptographic validity. It is reachable pre-authentication. |
| A missing bounds check in the TLS 1.3 Certificate-message parser of NetX Secure lets a malicious TLS 1.3 server trigger an unsigned-integer underflow and a subsequent heap out-of-bounds read in any peer that processes a remote Certificate message. It is reachable pre-authentication, during the normal handshake, before certificate verification completes. |
| The Web add-on's HTTP server searches the entire request packet for header fields instead of stopping at the end of the header section. A header field name placed in the request body is therefore reported to the server as though it were a header, which lets a client control request framing decisions it should not be able to reach. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) characters in user-supplied email header names and values before writing them into the SMTP DATA section. A CR/LF sequence embedded in a name or value passed to MailMessage.addHeader(), MailMessage.setHeaders(), MailAttachment.addHeader(), or MailAttachment.setHeaders() is written verbatim to the wire, allowing an attacker to inject arbitrary headers (e.g. Bcc, Reply-To, Content-Type) or prepend body content to the outgoing message.
The same weakness affects MIME part metadata set via MailAttachment.setContentType(), setDisposition(), setDescription(), and setContentId(), which are written directly into MIME part headers without validation.
A secondary weakness in Utils.mustEncode(char) additionally allows a bare LF in a From display-name to bypass Q-encoding and reach the wire unchanged.
An unauthenticated attacker who can control any header name, header value, or attachment metadata field passed to the mail client (for example via a web form or API that feeds into MailMessage) can exploit this to redirect email copies, spoof headers, or tamper with message structure.
The impacted component is io.vertx:vertx-mail-client. |
| In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP/1.x decoder uses a canonicalization for well known HTTP headers, the canonicalization process interprets well crafted headers as headers of this list, allowing for instance Content-Xength to be interpeted as Content-Length.
This can be exploited for request smuggling purpose.
The impacted component is io.vertx:vertx-core. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop.
The impacted component is io.vertx:vertx-mysql-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the WebSocket implementation does not define a maximum number of bytes allocation when decompressing frames or messages. This can be used to implement DDOS attacks with a zip bomb.
The impacted component is io.vertx:vertx-core. |
| In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the HTTP proxy provides a body transformer interceptor that relies on a max buffered bytes limit to ensure a bounded buffer for each request. This can be used to force a server to indefinitely allocate heap. This vulnerability requires to use an intercepting body transformer.
The impacted component is io.vertx:vertx-http-proxy. |
