| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: account proxy paths against the mesh path limit
Proxy-path churn can drive the interface path counter negative and let
later mesh path additions exceed MESH_MAX_MPATHS.
mesh_path_free_rcu() decrements the interface mpaths counter for entries
from both the mesh and proxy path tables, but mpp_path_add() never
reserves a slot in that counter. Removing or expiring a proxy path
therefore returns a slot that was never charged.
mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once
it falls below the number of installed paths the limit no longer holds.
Reserve the shared quota before allocating a proxy path and release it on
every unsuccessful addition. Mesh and proxy paths now share one
1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxcjk-1013: reject duplicate event disable
The IIO core does not filter duplicate writes to the event enable
attribute. kxcjk1013_write_event_config() already ignores repeated
enable requests, but a repeated disable request still calls
kxcjk1013_set_power_state(data, false), dropping a runtime PM reference
that was not acquired for this request. This can underflow the runtime
PM usage count and trigger a "Runtime PM usage count underflow" warning.
Return early when the requested state already matches ev_enable_state. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: prevent TX_RING byte count overflow
tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds
each valid packet length to the signed int len_sum. Userspace can
recycle completed frames concurrently, so a single blocking send call
is not bounded by the ring size.
After enough successful transmissions len_sum wraps into the negative
range. In particular, 65536 65535-byte frames followed by a 65007-byte
frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats
that as an impossible return and triggers a BUG. On systems configured
to panic on oops, a CAP_NET_RAW holder can panic the host kernel.
Stop before the next frame would make the byte count exceed INT_MAX.
The positive short count leaves that frame pending for a later send
call.
A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build
of Linux 7.3-rc4. With this change, the same reproducer returned the
expected positive short count without an oops. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fail DACL rewrite when the new DACL exceeds 64K
replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of
the DACL they build in a u16. That accumulator can wrap.
validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) /
20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can
grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with
one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is
therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond
what a u16 can hold. A wraparound is reached with 863 ACEs.
After the wraparound, ndacl_ptr->size becomes meaningless and the offset
will point anywhere in the ACE array. As a result, we will see
corruption of the DACL, which then gets sent to the server. This is not
an out-of-bounds write as the allocation now covers the worst-case
expansion, so writes will always go into the buffer.
Adjust the code to use a u32 internally and return -EOVERFLOW in the
overflow case. The operation must be refused, because a DACL can only
hold 2^16-1 bytes on the wire and larger DACLs cannot be represented.
set_chmod_dacl() carries the same pattern and is fixed the same way. It
only wraps once the source DACL comes within roughly 380 bytes of the
64K ceiling, but the failure mode is identical. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq: add overflow bounds to quantum and initial quantum
fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 *
psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy
with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return
0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit
arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill
loop adds 0 to f->credit (which stays <= 0) and goto begin loops
forever under the qdisc lock, creating a soft lockup.
Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product
cannot wrap, then cap the result at 1 << 20, matching the bound already
enforced on TCA_FQ_QUANTUM in fq_change().
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a
dummy device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_table_check: skip special zero mappings
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: guard io_size EOF trim against concurrent truncate underflow
iomap: fix zero padding data issue in concurrent append writes
changed ioend accounting so that io_size tracks only valid data
within EOF. This trims io_size when a writeback range extends
past end_pos:
ioend->io_size += map_len;
if (ioend->io_offset + ioend->io_size > end_pos)
ioend->io_size = end_pos - ioend->io_offset;
However, if end_pos ends up below ioend->io_offset, the subtraction
becomes negative and is stored in size_t io_size, causing an unsigned
wrap to a huge value. This can happen when writeback continues past
byte-level EOF up to a block-aligned range, or when a concurrent
truncate shrinks the file after end_pos was sampled in
iomap_writeback_handle_eof().
A wrapped io_size can mislead append detection and corrupt
completion-time size handling, since filesystem end_io paths consume
io_size for decisions such as on-disk EOF updates and unwritten/COW
completion ranges.
Fix this by clamping io_size to zero when EOF has moved to or before
the ioend start offset. This preserves the original intent of trimming
io_size to valid in-EOF data while avoiding the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch
In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd
and non-rsvd hugetlb cgroup charges. When map_chg is set,
hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but
the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg
with the non-rsvd cgroup pointer.
As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong
(non-rsvd) cgroup pointer into the folio's rsvd slot.
When the folio is later freed, free_huge_folio() unconditionally calls
both hugetlb_cgroup_uncharge_folio() and
hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the
wrong cgroup from the folio and decrements a counter that was never
charged for that cgroup, causing a page_counter underflow:
page_counter underflow: -512 nr_pages=512
WARNING: mm/page_counter.c:61 at page_counter_cancel
Fix this by introducing a separate h_cg_rsvd pointer exclusively for the
rsvd charge path, keeping the rsvd and non-rsvd charges fully independent
through their charge, commit, and error uncharge paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
