| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handler and return early
unless it reports a FIFO sample is ready. Because FIFO_RDY is the only
interrupt source enabled in max30102_chip_init(), an invocation of
max30102_interrupt_handler() without the FIFO_RDY interrupt status bit
set carries no data to read and can return before touching
active_scan_mask. A negative return from max30102_fifo_count()
indicates a failed interrupt status read and is treated the same way. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers
Other, non DAI copier widgets could have the same stream name (sname) as
the ALH copier and in that case the copier->data is NULL, no alh_data is
attached, which could lead to NULL pointer dereference.
We could check for this NULL pointer in sof_ipc4_prepare_copier_module()
and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai()
will miscalculate the ALH device count, causing broken audio.
The correct fix is to harden the matching logic by making sure that the
1. widget is a DAI widget - so dai = w->private is valid
2. the dai (and thus the copier) is ALH copier |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: only treat a positive changeset id as registered
of_overlay_fdt_apply() stores the idr_alloc() return value in
ovcs->id before checking it. On failure the stored id is negative,
free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove()
is called with a negative id and list_del() runs on ovcs->ovcs_list,
which is not initialized until after the id allocation. An allocation
failure at that point dereferences NULL.
Make free_overlay_changeset() treat only a strict-positive id as
registered. The rest of the function already copes with a
partially-initialized ovcs, so the error path stays a plain
goto err_free_ovcs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mctp: publish the mctp_dev only after it is initialised
mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev
is assigned, so a reader that picks the device up in that window
dereferences a net_device pointer that is still NULL:
KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7]
Call Trace:
<TASK>
? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49)
? __pfx_mctp_dst_output (net/mctp/route.c:41)
? selinux_socket_sendmsg (security/selinux/hooks.c:5278)
____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790
(discriminator 1) net/socket.c:2684 (discriminator 1))
? __pfx_____sys_sendmsg (net/socket.c:1131)
? __pfx_copy_msghdr_from_user (net/socket.c:2590)
? update_cfs_rq_load_avg (kernel/sched/fair.c:5478)
___sys_sendmsg (net/socket.c:2738)
? __pfx____sys_sendmsg (net/socket.c:2625)
? perf_event_task_tick (./include/linux/rcupdate.h:838)
? sched_tick (kernel/sched/core.c:5818)
? clockevents_program_event (kernel/time/clockevents.c:372)
? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100)
__sys_sendmsg (net/socket.c:2770)
? __pfx___sys_sendmsg (net/socket.c:2751)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Fix by publishing only once the object is fully initialised:
__mctp_dev_get() runs under rcu_read_lock() only and hands
this object to readers as soon as mctp_ptr is assigned, so
they must never observe mdev->dev == NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix NULL dereference in set_coalesce before first open
The Rx ring priv and index are only set in bcmgenet_init_rx_ring(),
which runs at open. Setting the Rx coalescing parameters on an interface
that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences
a NULL ring->priv. The oops happens with RTNL held, so networking
stays stuck until a reboot:
Unable to handle kernel paging request at virtual address 0000000000002788
pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88
lr : bcmgenet_set_coalesce+0xe8/0x180
Call trace:
bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P)
__ethnl_set_coalesce.isra.0+0x490/0x570
ethnl_set_coalesce+0x48/0xc0
ethnl_default_set_doit+0xf4/0x230
genl_family_rcv_msg_doit+0xe8/0x160
genl_rcv_msg+0x220/0x2a0
netlink_rcv_skb+0x68/0x140
genl_rcv+0x40/0x60
netlink_unicast+0x338/0x3c0
netlink_sendmsg+0x19c/0x3f8
__sock_sendmsg+0x64/0xc0
__sys_sendto+0x124/0x198
__arm64_sys_sendto+0x30/0x48
Set priv and index at probe. Writing the registers while the interface
is down is harmless because open resets the MAC and
bcmgenet_init_rx_coalesce() reapplies the stored values.
It was observed on a Raspberry Pi CM4, but should apply to all other
genet devices. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: allocate dummy netdev sooner
The RX rings and the shared NAPI are carried by an internal "dummy" netdev
(eth->dummy_dev). mtk_probe() creates that dummy device, and adds the
shared tx/rx NAPI to it, only after the MAC netdevs have been registered.
That order has been there since the MT7623 support was added and leaves a
window in which the netdevs are visible to the network core before the
shared NAPI and the dummy device exist.
If anything brings the first netdev up during that window (e.g. netifd
opening the WAN link the instant the interface is registered), the
first-open path runs without them. On NETSYS v2 and later SoCs
mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev ==
NULL:
WARNING: CPU: ... Missing net_device from driver
in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs
(MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open
instead calls napi_enable() on a napi_struct that netif_napi_add() has not
initialised yet and dereferences a NULL napi->dev.
Allocate the dummy netdev and add the shared tx/rx NAPI to it before the
register_netdev() loop. Both the dummy-allocation failure and a
register_netdev() failure now unwind through mtk_unreg_dev(), which
unregisters the net_device notifiers and the netdevs registered so far,
stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the
dummy carrier is freed.
A netdev that opened during the window can also have queued the
frame-engine reset worker (via the tx watchdog or phylink), so the probe
error path now cancels eth->pending_work before freeing the shared state,
as mtk_cleanup() already does on remove. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend
dc_state_create_copy() can return NULL on allocation failure.
dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts()
and continues execution, returning success. dm_resume() then
dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the
following dc_state->stream_count loop, crashing during GPU reset
recovery.
Return -ENOMEM immediately if the copy fails, so the caller aborts
suspend instead of leaving a NULL cached state for resume.
(cherry picked from commit 84b6d7932fdd2857795a257f9f258562a3cddcab) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device
platform_device_register_data() can fail and return an ERR_PTR, but the
return value is used without checking, leading to an invalid pointer
being stored in ddp_comp[].dev and passed to component_match_add() and
mtk_ddp_comp_init(), which could result in a kernel crash.
Add an IS_ERR() check to jump to the error handling path on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
When user space sets up FunctionFS with only full-speed descriptors
(e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a
higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER),
config_ep_by_speed() detects that the function lacks descriptors for
the current speed, logs a warning, and falls back to full-speed
descriptors. The endpoint is then successfully enabled via
usb_ep_enable(), and epfile->ep becomes valid.
However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_DESC
ioctl to query the endpoint descriptor, ffs_epfile_ioctl() selects the
descriptor index solely based on gadget->speed:
switch (epfile->ffs->gadget->speed) {
case USB_SPEED_SUPER:
case USB_SPEED_SUPER_PLUS:
desc_idx = 2;
break;
case USB_SPEED_HIGH:
desc_idx = 1;
break;
default:
desc_idx = 0;
}
desc = epfile->ep->descs[desc_idx];
memcpy(&desc1, desc, desc->bLength);
Because user space only supplied full-speed descriptors,
epfile->ep->descs[1] is NULL. Dereferencing desc->bLength triggers an
immediate kernel NULL pointer dereference panic.
Fix this by falling back through lower speed descriptors if the current
speed descriptor was not supplied, matching the fallback logic in
config_ep_by_speed() and historical f_fs behavior. If still missing,
fall back to epfile->ep->ep->desc (the active descriptor), and return
-EINVAL safely if no valid descriptor is found. In addition, mark desc
as const to match struct usb_ep::desc and avoid discarding qualifiers. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe
The Cadence USBSS controller is a two-function PCI device. The first
probed function allocates the driver data and stores it with
pci_set_drvdata(), while the second function reuses it via
pci_get_drvdata() when pci_is_enabled() reports that the first
function has already been probed.
When the second function is probed while the first one has been
enabled but has not yet set its driver data, pci_get_drvdata()
returns NULL, and the subsequent wrap->devfn assignment dereferences
a NULL pointer and crashes the kernel.
logs:
Call trace:
cdns3_pci_probe+0xa4/0x300
local_pci_probe+0x44/0xa8
pci_call_probe+0x54/0x158
pci_device_probe+0x84/0x100
really_probe+0x184/0x3d0
__driver_probe_device+0x80/0x178
driver_probe_device+0x44/0xe8
__driver_attach+0xec/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x28/0x38
bus_add_driver+0x110/0x238
driver_register+0x64/0x128
__pci_register_driver+0x50/0x60
cdns3_pci_driver_init+0x28/0x38
do_one_initcall+0x5c/0x280
do_initcalls+0x104/0x1d8
kernel_init_freeable+0x140/0x218
kernel_init+0x28/0x1f8
ret_from_fork+0x10/0x20
Return -EPROBE_DEFER in this case so that probing is retried after
the first function has completed its probe. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: port: fix tty_port_tty_vhangup() race
Drivers rely on tty_port_tty_vhangup() to synchronously hang up their
ports before tearing down resources as part of deregistration (e.g. on
physical disconnect).
If tty_port_tty_vhangup() races with another hangup it may however
return before the port has been shut down. This is in turn can lead to
use-after-free and NULL-pointer dereferences in racing ioctls (including
a synchronous hangup) and in processing of racing asynchronous hangups
(carrier loss).
Add the missing serialisation to tty_port_tty_vhangup() and
tty_port_hangup() so that the former does not return until the port has
been shut down also when there is a racing hangup.
Note that serial core does not use tty_port_hangup(), but it already
holds the port mutex when clearing port->tty and shutting down the port
in uart_hangup(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy
When walking shadow page tables, immediately terminate the walk if the root
is a "dummy" root, i.e. a root whose top-level page table is backed by the
zero page, but otherwise doesn't exist. If memslot creation races with a
stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align,
KVM will attempt to walk shadow page tables using the zero page and hit a
NULL pointer deref.
BUG: kernel NULL pointer dereference, address: 0000000000000021
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm]
Call Trace:
<TASK>
kvm_mmu_invalidate_addr+0x92/0xe0 [kvm]
__kvm_inject_emulated_page_fault+0x67/0x80 [kvm]
ept_page_fault+0x160/0x850 [kvm]
kvm_mmu_do_page_fault+0x102/0x1f0 [kvm]
kvm_mmu_page_fault+0x8e/0x6b0 [kvm]
vmx_handle_exit+0x163/0x640 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f606d0b53bb
Opportunistically harden the shadow walks against fully invalid roots, but
WARN, as all callers are expected/required to pre-check for a valid root.
Don't WARN in the dummy root case as the whole point of using a dummy root
is to provide a root that's valid enough to enter the guest, i.e. it should
Just Work for all flows except those that *need* to know about dummy roots.
Alternatively, KVM could allocate a dedicated page and associated shadow
page structure for the dummy root, which is very tempting as it such an
approach should be more resilient against unexpected behavior. But that
would be a much larger and thus riskier change than simply terminating
walks of dummy roots. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function already dereferences a few lines up to find pmu.
armv8pmu_sched_task() is the only in-tree implementation that
dereferences the argument, and it only reads ->pmu, so the oops needs
BRBE, added in v6.17. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch null pointer dereference
This happens because of a special case in check_cond_jmp_op(),
which attempts to strip PTR_MAYBE_NULL flags from pointer types,
when processing comparisons like `rA == rB`, if either rA or rB can't
be null.
The non-null property is derived based on the absence of
PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient
for types like PTR_TO_MEM, as in the example.
This patch replaces type_may_be_null() call with reg_not_null(),
which contains an allowlist of types for which absence of
PTR_MAYBE_NULL actually means that the value can't be NULL at runtime.
At the moment, the list in the reg_not_null() omits two types for
which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF.
In order to remain backward compatible, and assuming that only
comparison between pointers of the same type makes sense,
this commit extends reg_not_null(). W/o such an extension e.g.
verifier_jeq_infer_not_null/null_ptr_to_map_value fails.
reg_not_null() can be extended further, but I deem that out of scope
for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID
checks in the check_cond_jmp_op() can be removed with migration to
reg_not_null(), but that is a behavioural change, as the special case
would start matching for PTR_TO_BTF_ID that is also is_trusted_reg().
I omit the behavioural change from this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault into a kernel panic.
Record both tracepoints in raw_tp_null_args[] and mark argument one as
a non-pointer. This preserves scalar access to the cookie while rejecting
direct and helper-mediated pointer use. Merely marking it nullable would
not suffice because SEND_SIG_PRIV is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't infer non-NULL from a pointer with an unbounded offset
reg_not_null() decides that a register holds a non-NULL value by
looking at its type alone. For pointer types that allow arithmetic the
type only guarantees a non-NULL base, in case of an unbound offset
the runtime offset value might still add up to NULL.
Consider the followng program:
r6 = bpf_map_lookup_elem(map, &0); /* present */
if (r6 == 0) return 0;
r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */
r8 = r7;
r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */
r8 <<= 1;
r8 >>= 1; /* any non-negative offset is accepted by */
/* check_reg_sane_offset_ptr() */
r6 += r8; /* verifier: map value; runtime: zero */
if (r7 != r6) return 0;
*(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */
At runtime both registers are zero, the comparison is true and the
load faults with NULL pointer dereference.
Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep refcount_acquire nullable for borrowed RCU kptrs
bpf_refcount_acquire() is fallible for a borrowed reference because the
object may have reached a zero refcount. The verifier therefore keeps
KF_RET_NULL on the return value unless the argument is an owning reference.
An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only
receives NON_OWN_REF when the pointee contains a graph node. A refcounted
object without a graph node consequently looks like an owning reference
even though the loaded register has no acquired reference state. If the
program drops the last real reference while remaining in the RCU critical
section, refcount_inc_not_zero() returns NULL while the verifier treats the
result as non-NULL.
Only classify the argument as owning when it is backed by a verifier-tracked
reference. This retains the non-NULL return for pointers from bpf_obj_new(),
bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a
NULL check for borrowed RCU kptrs.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: validate virtqueue alignment
vduse_validate_config() only checks the upper bound of vq_align. Invalid
values can therefore reach vring_create_virtqueue_map(). The split-ring
helpers use align - 1 as a bit mask, so the alignment must be a non-zero
power of two. A zero value makes vring_size() drop the descriptor and
available-ring part and vring_init() leave the used ring pointer NULL.
The VIRTIO spec requires the used ring to start at an address
aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as
well as non-power-of-two values before they reach the virtio ring helpers.
Opening a virtio-net device created with vq_align=0 triggered:
BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100
Read of size 2 at addr 0000000000000000 by task systemd-network/1062
Call Trace (relevant frames):
dump_stack_lvl
print_report
kasan_report
__asan_load2
virtqueue_kick_prepare_split+0xe3/0x100
virtqueue_kick_prepare+0x40/0x60
try_fill_recv+0x857/0x1250
virtnet_open+0x189/0x460
__dev_open+0x225/0x390
__dev_change_flags+0x368/0x3b0
netif_change_flags+0x56/0xc0
do_setlink.isra.0+0x68c/0x1e30
Validate the value before it reaches the virtio ring helpers. |
