| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip double clone set expressions on element insert
Both the dynset and newsetelem path clone the existing set expressions
when setting set element expressions if no override expressions are
provided. This results in a double clone, once to clone the template set
expressions then another clone on the new element. Add a flag to
annotate if userspace provides a override expression (ie. expression of
the same type of the set but different configuration), otherwise borrow
the existing expression from the set. Add conditionals to release
expression iif they represent an override. Use this new override_exprs
flag to dump the dynset expression override to userspace.
This simplifies the existing logic and it also fixes a bug with the
connlimit expression which results in a module refcount imbalance
WARNING splat when resorting on the default set expressions. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
file case, but not the dirty bit. The pte path does propagate it, in
zap_present_folio_ptes() and so does the pmd split path, in
__split_huge_pmd_locked().
For most file mappings the omission is harmless, because writing to a
shared file mapping goes through page_mkwrite(), which dirties the folio.
tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify()
is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs
a writable pmd via do_read_fault(). do_read_fault() does not call
fault_dirty_shared_page(), so subsequent stores through that mapping set
only the hardware dirty bit in the pmd and never call folio_mark_dirty().
A shmem folio allocated by a fault is marked uptodate but not dirty (see
the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at
all.
Unmapping such a folio - munmap(), or exit_mmap() when the process dies -
then loses the only record that it was written, because zap_huge_pmd()
drops the pmd without transferring the dirty bit. Reclaim afterwards sees
a clean shmem folio: the whole swap-out block in shrink_folio_list() is
inside "if (folio_test_dirty(folio))", so pageout() is skipped and the
folio falls into __remove_mapping(). There, folio_is_file_lru() is false
for a swapbacked folio, so no shadow entry is created and
__filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The
data is freed without ever being written to swap, and the next fault on
that index returns a freshly zeroed folio.
This is silent data loss for any process that keeps state in a MAP_SHARED
tmpfs segment across an unmap - for example a cache handed from one
process generation to the next through /dev/shm. It requires the folio to
be PMD-mapped, so it only shows up once shmem THP is enabled (which is
what we did in Meta fleet and started noticing crashes); with THP off the
pte path transfers the dirty bit correctly. It also only becomes visible
when swap is enabled, because with no swap device shmem folios (which are
on the anon LRU) are not scanned by reclaim at all, so the clean folio is
never dropped.
Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
2MB-backed region, write a known pattern through the resulting mapping,
munmap, force reclaim of the cgroup, then re-map and read back. Without
this patch the region reads back as zeros and vmstat shows zswpout 0 - the
data was discarded rather than swapped. With this patch the region reads
back correctly and the pages are swapped out as expected. With
huge=never, or when the first touch is a write, the test passes either
way. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Wrap user-invoked calls to fb_set_var() in helper
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: fix truesize for mb-xdp-pass case
When mb-xdp is set and return is XDP_PASS, packet is converted from
xdp_buff to sk_buff with xdp_update_skb_shared_info() in
bnxt_xdp_build_skb().
bnxt_xdp_build_skb() passes incorrect truesize argument to
xdp_update_skb_shared_info().
The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but
the skb_shared_info was wiped by napi_build_skb() before.
So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it
instead of getting skb_shared_info from xdp_get_shared_info_from_buff().
Splat looks like:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590
Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3
RIP: 0010:skb_try_coalesce+0x504/0x590
Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99
RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287
RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0
RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003
RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900
R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740
R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
? __warn+0x84/0x130
? skb_try_coalesce+0x504/0x590
? report_bug+0x18a/0x1a0
? handle_bug+0x53/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? skb_try_coalesce+0x504/0x590
inet_frag_reasm_finish+0x11f/0x2e0
ip_defrag+0x37a/0x900
ip_local_deliver+0x51/0x120
ip_sublist_rcv_finish+0x64/0x70
ip_sublist_rcv+0x179/0x210
ip_list_rcv+0xf9/0x130
How to reproduce:
<Node A>
ip link set $interface1 xdp obj xdp_pass.o
ip link set $interface1 mtu 9000 up
ip a a 10.0.0.1/24 dev $interface1
<Node B>
ip link set $interfac2 mtu 9000 up
ip a a 10.0.0.2/24 dev $interface2
ping 10.0.0.1 -s 65000
Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be
able to reproduce this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()... |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client
A number of Zen4 client SoCs advertise the ability to use virtualized
VMLOAD/VMSAVE, but using these instructions is reported to be a cause
of a random host reboot.
These instructions aren't intended to be advertised on Zen4 client
so clear the capability. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: InnoDB). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where MySQL Server, MySQL Cluster executes to compromise MySQL Server, MySQL Cluster. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.0 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:U/C:N/I:N/A:H). |
