Export limit exceeded: 414071 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3330 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63993 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. | ||||
| CVE-2026-63801 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-53388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before replacing page cache folio fuse_try_move_folio() unlocks the request on entry but does not re-lock it on the success path. This means fuse_chan_abort() can end the request and free the fuse_io_args (eg fuse_readpages_end()) while the subsequent copy chain logic after fuse_try_move_folio() accesses the fuse_io_args, leading to use-after-free issues. Fix this by calling lock_request() before replace_page_cache_folio(). This ensures the request is locked on the success path which will prevent the fuse_io_args from being freed while the later copying logic runs, and also ensures that the ap->folios[i]->mapping is never null since ap->folios[i] will always point to the newfolio after replace_page_cache_folio(). | ||||
| CVE-2026-53085 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU. | ||||
| CVE-2026-53006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. | ||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | ||||
| CVE-2026-52973 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM. | ||||
| CVE-2026-52950 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) | ||||
| CVE-2026-46176 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. | ||||
| CVE-2026-46166 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46111 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del(). | ||||
| CVE-2026-45984 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] | ||||
| CVE-2026-45972 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF and double free in smb2_open_file() Zero out @err_iov and @err_buftype before retrying SMB2_open() to prevent an UAF bug if @data != NULL, otherwise a double free. | ||||
| CVE-2026-43441 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If bonding ARP/NS validation is enabled, an IPv6 NS/NA packet received on a slave can reach bond_validate_na(), which calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can crash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: <IRQ> ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate() and avoid the path to ipv6_chk_addr(). | ||||
| CVE-2026-43437 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released. | ||||
| CVE-2026-43402 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly. | ||||
| CVE-2026-43374 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed. | ||||