| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative optlen in cgroup getsockopt hook
A cgroup getsockopt BPF program can shrink ctx->optlen after the
kernel getsockopt handler has run. The kernel-buffer variant, used by
TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original
length.
If BPF writes a negative optlen, that value is accepted and propagated
back to the TCP getsockopt code. It can then be passed to
copy_to_sockptr() as a size_t and trigger the hardened usercopy
bytes > INT_MAX warning.
Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(),
matching the lower-bound validation already present in the sockptr-based
getsockopt hook. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS loader assigns file-controlled wsmp.loop_start and wsmp.loop_length values to samples without calling fluid_sample_validate() or fluid_sample_sanitize_loop(). A crafted DLS file can place sample loop points beyond the sample buffer, causing out-of-bounds reads during audio rendering, undefined behavior, possible memory disclosure, and denial of service. Builds compiled with the CMake option enable-native-dls set to OFF do not expose the affected parser. This issue is fixed in version 2.5.6. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's total cluster count, which ntfs3 holds in
sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller
of mi_enum_attr() runs). Reject evcn values that fall outside this range.
However, an empty non-resident attribute (no allocated clusters) is
legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via
attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel
must keep passing, so exclude evcn == U64_MAX from the range check. The
existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is
false) and continues to require svcn == 0 for it, while the range check
rejects every other out-of-range evcn and thereby also defuses the
"evcn + 1" wraparound.
svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1"
implies svcn <= nbits.
[almaz.alexandrovich@paragon-software.com: fixed evcn check] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID
tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID
taken from master->streams[0], and only warns when the device does not have
exactly one stream. A device with several streams gets only its first one
mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB
entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out
of bounds.
Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
can trigger the out of bounds access by reading the crafted file with the
negative offset. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: reject PDUs declaring more data than was received
isert_recv_done() hands each received PDU to the opcode handlers without
ever looking at wc->byte_len, the number of bytes the HCA actually placed
in the receive descriptor. The handlers then copy that many bytes - the
data-segment length the initiator declared in the BHS
(ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) -
out of the fixed-size descriptor:
isert_handle_iscsi_dataout():
sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc),
unsol_data_len);
isert_handle_scsi_cmd():
sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents,
isert_get_data(rx_desc), imm_data_len);
Because the declared length is never checked against wc->byte_len, an
initiator can declare a data segment larger than the bytes it actually
sent (and larger than the descriptor) and cause an out-of-bounds read of
the receive buffer.
Nothing upstream of isert closes this door:
- __iscsit_check_dataout_hdr() bounds the inbound payload against
conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter,
used here for the inbound check.
- iscsi_set_connection_parameters() sets
ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength;
and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in
iscsi_check_acceptor_state(), so the value the initiator declares is
adopted verbatim (type range 512..16777215). The initiator effectively
raises its own ceiling.
- isert never clamps the negotiated value to its own fixed receive
descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and
the descriptor size are unrelated.
The imm_data_len == data_len path is more than an over-read: it aliases
the receive descriptor via sg_set_buf() and passes it to the backend as
the data source for the SCSI WRITE, so an over-declared length causes heap
contents past the descriptor to be written through the backend to the
backing store. The backend is the victim of the oversized scatterlist
isert hands it, not the cause; no read-back of the written bytes was
demonstrated.
Trigger: after login completes (full feature phase), an initiator that has
declared a large TargetRecvDataSegmentLength and a FirstBurstLength that
permits unsolicited/immediate data sends a PDU whose declared data-segment
length exceeds what was received. With KASAN:
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0
Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25
Workqueue: ib-comp-wq ib_cq_poll_work
Call Trace:
sg_copy_buffer+0x150/0x1c0
isert_recv_done+0xba6/0x2390
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout()
(ib_isert.c:1160), inlined through isert_rx_opcode().
Validate wc->byte_len against the framing in isert_recv_done() before the
PDU reaches any handler, and reinstate the connection if it is short.
Because the test compares without subtracting the header length, it also
rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise
be parsed out of stale descriptor contents. The login handler rejects PDUs
shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login
PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared
length either; that is fixed in the next patch. The data handlers had no
length check at all.
isert reads the data segment from a fixed offset: isert_get_data()
returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for
an AHS. The bytes the handlers touch are therefore exactly
[ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum
against wc->byte_len bounds precisely the region that is read. An AHS
term would only make the test stricter without bounding anything furth
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent out-of-bounds read in super root block parsing
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title] |
| FreeRDP before 3.31.0 contains a buffer over-read vulnerability in the rts_read_result function within the RPC gateway transport parser. Attackers can send a malicious BIND_ACK PDU with a truncated result entry to trigger an out-of-bounds read causing process abort. |
| A flaw has been found in OpenClaw ClawScan up to 0.1.6. This affects an unknown function of the file internal/runner/static_scanner.go of the component Static Scanner. This manipulation causes incomplete comparison with missing factors. It is possible to launch the attack on the local host. The exploit has been published and may be used. Upgrading to version 0.1.7 mitigates this issue. Patch name: 9f6a6fbb9f1137345566d0ab44c73893dfe112fa. The affected component should be upgraded. |
| novel-plus through 5.3.3 contains an insecure default cache-management password in the CacheController.refreshCache endpoint that allows anonymous attackers to invalidate portal caches by supplying the hardcoded default value in the URL path. Attackers can trigger unauthorized cache invalidation by accessing the cache/refresh endpoint with the known default password, forcing unnecessary database queries to repopulate the cache. |
| SIPp through 3.7.7 contains a buffer overflow vulnerability in the get_header() function in src/sip_parser.cpp when processing SIP messages with header content exceeding 20,490 bytes. Unauthenticated remote attackers can send crafted SIP messages with oversized headers to overflow the static buffer and crash the process. |
| zstd-jni before 1.5.7-14 fails to validate the samples buffer capacity in Zstd.trainFromBufferDirect, allowing attackers to read past buffer boundaries by supplying oversized per-sample lengths. Attackers can trigger out-of-bounds memory access by providing crafted sample length arrays that cause the native implementation to walk past the buffer allocation, resulting in JVM termination. |
| IBM Verify Identity Access is missing origin validation which could allow a remote attacker to perform operations as the victim and potentially launch further attacks against the systems. |
| IBM ContextForge MCP Gateway <= v1.0.4 IBM mcp-context-forge could allow an authenticated user to bypass protection mechanisms due to incomplete recursive inspection of nested payload content. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: avoid OOB read of build info string
The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read
Build Information) and hands the response to bt_dev_info() and
hci_set_fw_info() as a "%s" string starting at skb->data + 1, without
checking the length. A backend that answers with status only leaves that
pointer past the end of the received data, so the walk reads adjacent
slab memory until it meets a NUL. Those bytes reach the kernel log and
the firmware-info debugfs file.
To fix this, print the string with a bounded "%.*s" limited to
skb->len - 1. A short or unterminated response then prints as much as
arrived instead of failing setup.
This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of
revision string in bpa10x_setup()"), which fixed the identical pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat(). |
| A vulnerability was found in Freedesktop Poppler 26.07.0. The impacted element is the function JBIG2Stream::readCodeTableSeg of the file poppler/JBIG2Stream.cc. Performing a manipulation results in integer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The patch is named eb87cf711563894649bd0c365baa479401dc6d51. To fix this issue, it is recommended to deploy a patch. |
