| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This candidate was rejected after further investigation determined that it is not a security vulnerability. The client certificate chain is validated during mTLS negotiation at the TLS layer or reverse proxy before Keycloak processes CRL Distribution Point or OCSP URLs, so only certificates issued by a CA explicitly trusted by the administrator can trigger these requests. |
| JobOps through 0.13.1 contains a server-side request forgery vulnerability in the POST /api/manual-jobs/fetch handler that allows authenticated users, or unauthenticated clients in demo mode, to make the server fetch internal destinations. Attackers can supply loopback, private, or cloud metadata addresses in the url field to read returned page content, disclosing instance metadata and internal service data. |
| The Azure Key Vault KMS provider in Kroxylicious accepts an untrusted vaultName from wire-deserialized EDEK bytes without format validation, enabling SSRF that exfiltrates the proxy's Azure bearer token to an attacker-controlled host. Token replay against the real Key Vault defeats the entire record-encryption trust model. |
| PIA's token verification (`verify_token` in `pia/oidc.py`) fetches the OIDC discovery document of an allowlisted issuer and then follows the `jwks_uri` contained in that response without parsing it as a URL, comparing it against the approved issuer's origin, or requiring HTTPS — the only check is that the field is non-empty (`pia/oidc.py:42-52`). An approved identity provider — and every registered per-project Jenkins instance under `https://ci.eclipse.org/<project>/oidc` is a separate such party (`pia/models.py`) — can therefore direct PIA to issue a GET request to an arbitrary host and port, including over plaintext `http`, from PIA's own network position. The fetch happens before any signature is verified, as a side effect of an unauthenticated `POST /v1/upload/sbom` request that is ultimately rejected with 401. |
| ApostropheCMS is an open-source Node.js content management system. From 1.0.0-beta.10 until 1.0.0-beta.13 of the AI helper, an editor with image-generation capability can create a base64-generated image record without a stored provider URL and invoke image acceptance on a deployment using local relative storage with no trusted global base URL. The server resolves the fixed uploads path against a request-controlled Host-derived origin, enabling bounded server-side requests to an attacker-selected host, port, and HTTP origin, but not arbitrary-path retrieval or the stored-provider and absolute-storage configurations. This issue is fixed in AI helper 1.0.0-beta.13. |
| Plex Media Server before 1.43.3.10861 allows an authenticated user to request arbitrary internal or external addresses via the '/video/:/transcode/universal' path parameter. |
| Plex Media Server before 1.43.3.10861 allows SSRF via '/player/timeline'. An attacker using any X-Plex-Token value can include a full URL in the 'protocol' parameter and force the Plex server to POST to the attacker's chosen destination. |
| The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128).
An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks.
The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources. |
| SolarWinds Observability Self-Hosted was found to be affected by a Server-Side Request Forgery (SSRF) vulnerability that allows authenticated attackers to cause the application server to send requests to attacker-controlled or internal destinations. |
| ColdFusion is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. A low-privileged attacker could exploit this vulnerability to gain elevated access to internal resources. Exploitation of this issue does not require user interaction. Scope is changed. |
| ColdFusion is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. |
| ColdFusion is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. An attacker with high privileges could exploit this vulnerability to gain elevated access to internal resources. Exploitation of this issue does not require user interaction. Scope is changed. |
| ColdFusion is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. A low-privileged attacker could exploit this vulnerability to gain elevated access to internal resources. Exploit depends on conditions beyond the attacker's control. Exploitation of this issue does not require user interaction. Scope is changed. |
| Server-Side Request Forgery (SSRF) protection in the UrlImageConverter component of Apache Fesod (Incubating) fesod-sheet 2.0.2-incubating can be bypassed through DNS rebinding. When an application accepts an attacker-controlled image URL for spreadsheet writing, the converter checks the hostname's resolved IP addresses and then opens a separate connection that can resolve the hostname again. An attacker who controls DNS responses for the URL hostname may cause the connection to reach a restricted address after validation. CVE-2026-49328 covers SSRF in releases before 2.0.2-incubating; this issue is a DNS rebinding bypass of the protection in 2.0.2-incubating. Apache Fesod (Incubating) 2.1.0-incubating addresses the reported default-fetch scenario by disabling remote URL image fetching by default and requiring an explicit exact-host allowlist when the feature is enabled. Users should upgrade to 2.1.0-incubating. Applications enabling remote URL image fetching should allowlist only hostnames whose DNS and HTTP services are trusted. |
| A vulnerability was determined in smrealms smr up to f40380c017bc35cd8db6ffdb9d4e78bf65b9d43d. Affected is the function isUrlReachable of the file src/pages/Account/AlbumEditProcessor.php of the component Album Website. Executing a manipulation of the argument Website can lead to server-side request forgery. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. This patch is called cb402e7f4e70b617b59d8c55dbe926b951ceb4a8. Applying a patch is advised to resolve this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| IBM ContextForge MCP Gateway 0.1.0 through 1.0.5 is vulnerable to a server-side request Forgery (SSRF) that allows authenticated users with gateway creation privileges to perform arbitrary HTTP POST requests to internal network resources and cloud metadata endpoints. The vulnerability occurs during OAuth-enabled gateway registration when the system fails to validate the oauth_config.token_url parameter. When registering a gateway with OAuth client credentials authentication, an attacker can supply a malicious token_url pointing to internal services, cloud metadata endpoints (AWS IMDSv1, GCP, Azure), or localhost-bound services. The application immediately performs an HTTP POST request to the attacker-controlled URL with form-encoded credentials in the body. If the response cannot be parsed as a valid OAuth token response, up to 256 characters of the response body are reflected back to the attacker in the HTTP 502 error message. This vulnerability bypasses existing SSRF protections that are applied to the gateway.url field but not to OAuth configuration parameters. |
| A weakness has been identified in TiBillet Lespass up to 10e87909c5d526dffa6d424c104fc12860740537. This vulnerability affects the function get_img_from_url of the file ApiBillet/serializers.py of the component APIv1. Executing a manipulation of the argument img_url/image_url can lead to server-side request forgery. The attack can be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The vendor confirms: "[T]he fix (destination IP validation, redirect re-checks, timeout and size limit on remote image download) is already planned in our v2 API, which replaces the affected v1 endpoints. The v1 API, including the three affected serializers, will be removed in our next major release." |
| The Salon Booking System WordPress plugin before 10.31.11 does not validate a user-supplied image URL before fetching it server-side and writing the response to a publicly accessible location under an attacker-chosen filename, allowing users with the Salon Staff role or higher to force the server to read internal-only resources and disclose them, and to store a malicious SVG that runs arbitrary scripts in the site's origin for anyone who opens it. |
| KEDA is a Kubernetes-based Event Driven Autoscaling component. In version 2.20.2 and earlier, a namespace administrator who can create TriggerAuthentication and ScaledObject resources can set hashiCorpVault.address to a tenant-controlled endpoint and select Kubernetes authentication without an explicit credential. KEDA then uses the operator pod's projected ServiceAccount token and sends it to that endpoint as a Vault login credential. The JWT-shape filter from the prior CVE-2025-68476 remediation accepts the operator token because its subject is a Kubernetes ServiceAccount, so the attacker can obtain the operator's cluster-wide permissions, including broad Secret reads and workload or admission-related operations. This vulnerability is fixed in 2.21.0. |
| Portkey AI Gateway 1.14.0 through 1.15.2 contains a server-side request forgery vulnerability that allows unauthenticated attackers to reach loopback and Docker host services because isValidCustomHost trusts localhost-style hosts when TRUSTED_CUSTOM_HOSTS is unset. Attackers can send /v1 requests with a crafted x-portkey-custom-host header, such as via the ollama provider, to make the gateway call internal services and return their responses. |
