| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In nct7363_present_pwm_fanin, it does not release the reference,
causing a resource leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tegra-video: Fix memory leak in __tegra_channel_try_format()
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: fix bitmap leaks
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown. |
| A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware. |
| A vulnerability has been found in GNU Binutils 2.43/2.44 and classified as problematic. Affected by this vulnerability is the function display_info of the file binutils/bucomm.c of the component objdump. The manipulation leads to memory leak. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The patch is named ba6ad3a18cb26b79e0e3b84c39f707535bbc344d. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: fix memory leak in pad_compress_skb
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: Fix wraparounds of sk->sk_rmem_alloc.
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da13e ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_sk_select_reuseport() memory leak
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Drop sk's reference in both error paths.
unreferenced object 0xffff888101911800 (size 2048):
comm "test_progs", pid 44109, jiffies 4297131437
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 9336483b):
__kmalloc_noprof+0x3bf/0x560
__reuseport_alloc+0x1d/0x40
reuseport_alloc+0xca/0x150
reuseport_attach_prog+0x87/0x140
sk_reuseport_attach_bpf+0xc8/0x100
sk_setsockopt+0x1181/0x1990
do_sock_setsockopt+0x12b/0x160
__sys_setsockopt+0x7b/0xc0
__x64_sys_setsockopt+0x1b/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
After unregistering the CPU idle device, the memory associated with
it is not freed, leading to a memory leak:
unreferenced object 0xffff896282f6c000 (size 1024):
comm "swapper/0", pid 1, jiffies 4294893170
hex dump (first 32 bytes):
00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 8836a742):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffff9972f3b3>] acpi_processor_power_init+0xf3/0x1c0
[<ffffffff9972d263>] __acpi_processor_start+0xd3/0xf0
[<ffffffff9972d2bc>] acpi_processor_start+0x2c/0x50
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff9aee4acb>] acpi_processor_driver_init+0x3b/0xc0
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
[<ffffffff9ae7c4b0>] kernel_init_freeable+0x320/0x470
[<ffffffff99b231f6>] kernel_init+0x16/0x1b0
[<ffffffff99042e6d>] ret_from_fork+0x2d/0x50
Fix this by freeing the CPU idle device after unregistering it. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: call cache_put if xdr_reserve_space returns NULL
If not enough buffer space available, but idmap_lookup has triggered
lookup_fn which calls cache_get and returns successfully. Then we
missed to call cache_put here which pairs with cache_get.
Reviwed-by: Jeff Layton <jlayton@kernel.org> |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use helper function to calculate expect ID
Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
devres: Fix memory leakage caused by driver API devm_free_percpu()
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: Fix a memory leak in nr_heartbeat_expiry()
syzbot reported a memory leak in nr_create() [0].
Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.
But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."
nr_connect
nr_establish_data_link
nr_start_heartbeat
nr_release
switch (nr->state)
case NR_STATE_3
nr->state = NR_STATE_2
sock_set_flag(sk, SOCK_DESTROY);
nr_rx_frame
nr_process_rx_frame
switch (nr->state)
case NR_STATE_2
nr_state2_machine()
nr_disconnect()
nr_sk(sk)->state = NR_STATE_0
sock_set_flag(sk, SOCK_DEAD)
nr_heartbeat_expiry
switch (nr->state)
case NR_STATE_0
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN
&& sock_flag(sk, SOCK_DEAD)))
sock_hold() // ( !!! )
nr_destroy_socket()
To fix the memory leak, let's call sock_hold() only for a listening socket.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
[0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 |
