| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu_assign_pointer() for __rcu list updates
Several places in net/ipv6/mcast.c update RCU-protected lists
(np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer
assignments instead of rcu_assign_pointer():
1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did:
*map = ma->next;
without rcu_assign_pointer() while concurrent readers traverse
idev->mc_list locklessly under rcu_read_lock().
2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group
from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and
np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing
with lockless readers in inet6_mc_check().
3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to
np->ipv6_mc_list via raw assignment before publishing mc_lst.
4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers
passed into rcu_assign_pointer() lacked explicit dereference helpers.
Fix these by consistently using rcu_assign_pointer() along with
mc_dereference() / sock_dereference(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix subbuf resize races with trace_pipe_raw readers
Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak
uninitialized memory to userspace due to stale size values.
Modify ring_buffer_alloc_read_page() to handle the resizing of an
existing buffer_data_read_page if necessary and add a new
ring_buffer_read_page_size(). This new function enables ring-buffer
buffer_data_read_page users to not call the racy
ring_buffer_subbuf_size_get(). This makes the spare_size member of
ftrace_buffer_info redundant.
Finally, handle buffer_data_read_page/reader_page order discrepancy in
ring_buffer_read_page(). On a mismatch simply copy manually the data to
the buffer_data_read_page. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ibss: wait for in-flight TX on disconnect
While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes
stations, turns the carrier off and immediately tells the driver to
leave as well. While there may be synchronize_net() in station flush
and in this code later, packets can still be transmitted due to
cross-CPU race conditions after carrier off is set.
Therefore, it's possible for a race to happen where a TX to the
driver occurs while or after telling it to leave the IBSS. This can
be confusing to drivers, and in the case of iwlwifi leads to an
attempt to use invalid queues.
Move netif_carrier_off() to occur before sta_info_flush() during
IBSS disconnect, and add synchronize_net() if flushing didn't,
so that the synchronize_net() always happens between turning the
carrier off and telling the driver, avoiding this race. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: convert nfsd_net boolean flags to unsigned long flags word
nfsd_net contains several boolean fields that are accessed from
concurrent contexts without serialization. In particular,
nfsd4_end_grace() guards its drain path with a plain bool:
if (nn->grace_ended)
return;
nn->grace_ended = true;
The read and the write are independent, and nothing in struct
nfsd_net serializes them. At least two contexts can reach this
code with no lock held:
laundromat path
laundry_wq kworker
nfs4_laundromat()
nfsd4_end_grace()
RECLAIM_COMPLETE path
nfsd compound kthread
nfsd4_reclaim_complete()
inc_reclaim_complete()
nfsd4_end_grace()
Both callers can observe grace_ended == false on different CPUs,
both store true, and both proceed into nfsd4_record_grace_done(),
which invokes the active client_tracking_ops->grace_done callback.
For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops
via nfsd4_recdir_purge_old, and the cld v1+ ops via
nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(),
which walks every bucket of reclaim_str_hashtbl with no lock and
calls nfs4_remove_reclaim_record() (list_del + kfree) on each
entry. Two concurrent walkers corrupt the list and double-free
every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client()
iterating the same bucket reads through freed memory.
A third call site exists in nfs4_state_start_net() on the
skip_grace startup path, but it runs under nfsd_mutex before any
client has connected and before the laundromat's first delayed
work fires, so it cannot race with the two callers above.
Replace the scattered boolean fields in nfsd_net with a single
unsigned long flags word and an enum nfsd_net_flag for the bit
positions. The grace_ended race is fixed by using
test_and_set_bit(), which is atomic on all architectures. The
remaining flags (grace_end_forced, in_grace, somebody_reclaimed,
track_reclaim_completes, nfsd_net_up, lockd_up) are converted to
use test_bit/set_bit/clear_bit for consistency. This avoids
sub-word cmpxchg issues on architectures like Hexagon that only
support word-sized atomic operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Make nr_deadline_tasks an atomic_t
The nr_deadline_tasks variable in the cpuset structure was introduced by
commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task
in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks
can currently be modified by inc_dl_tasks_cs() under rq->lock and
by cpuset_attach() under cpuset_mutex. So if both updates happen
simultaneously, the nr_deadline_tasks variable can be corrupted leading
to incorrect operations down the road.
Fix that by changing its type to atomic_t so that nr_deadline_tasks
are always atomically updated. This fix patch is a low hanging fruit.
It can handle some of the races between a concurrent sched_setscheduler()
and cpuset_can_attach()/cpuset_attach() calls, but not all of them like
the other issue raised by sashiko [2]. This will be handled hopefully
in a future follow up patch.
[1] https://sashiko.dev/#/patchset/20260626181923.133658-1-longman%40redhat.com
[2] https://sashiko.dev/#/patchset/20260630033344.352702-1-longman%40redhat.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: sgi-gru: remove interrupt-context page-table walks
The GRU TLB miss handler walks a process's page tables without holding
page-table locks or a reference to the mapped page. It also uses a kernel
page-table accessor on user page tables and supports only PMD-level large
mappings on x86-64.
Remove the direct walker. Send interrupt faults directly to user polling
mode so the existing call-OS fallback retries them in process context.
Remove the mmap-lock failure statistic that can no longer be incremented. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER
mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs
before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain
kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the
same worker and the MT76_RESET bit under the mutex. An L1 SER racing a
channel switch could therefore have the worker unparked and MT76_RESET
cleared while the reset path resets the DMA rings, corrupting descriptors
or tokens. Take the mutex before disabling the worker, as mt7915 does. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/cluster: keep heartbeat local node stable
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
