| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was discovered in the Alta Recovery Vault feature of Veritas NetBackup before 10.4 and NetBackup Appliance before 5.4. By design, only the cloud administrator should be able to disable the retention lock of Governance mode images. This vulnerability allowed a NetBackup administrator to modify the expiration of backups under Governance mode (which could cause premature deletion). |
| A vulnerability classified as critical was found in CP Plus Wi-Fi Camera up to 20240401. Affected by this vulnerability is an unknown functionality of the component User Management. The manipulation leads to improper authorization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259615. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Access Control in some Thunderbolt(TM) Share software before version 1.0.49.9 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| An issue in spidernet-io spiderpool v.0.9.3 and before allows a local attacker to execute arbitrary code via a crafted command to get the token component. |
| An issue in the component ddcdrv.sys of Nicomsoft WinI2C/DDC v3.7.4.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. |
| Pluto is a superset of Lua 5.4 with a focus on general-purpose programming. In affected versions an attacker with the ability to actively intercept network traffic would be able to use a specifically-crafted certificate to fool Pluto into trusting it to be the intended remote for the TLS session. This results in the HTTP library and socket.starttls providing less transport integrity than expected. This issue has been patched in pull request #851 which has been included in version 0.9.3. Users are advised to upgrade. there are no known workarounds for this vulnerability. |
| vantage6 is an open-source infrastructure for privacy preserving analysis. Collaboration administrators can add extra organizations to their collaboration that can extend their influence. For example, organizations that they include can then create new users for which they know the passwords, and use that to read task results of other collaborations that that organization is involved in. This is only relatively trusted users - with access to manage a collaboration - are able to do this, which reduces the impact. This vulnerability was patched in version 4.5.0rc3.
|
| When installing Nessus Agent to a directory outside of the default location on a Windows host, Nessus Agent versions prior to 10.6.4 did not enforce secure permissions for sub-directories. This could allow for local privilege escalation if users had not secured the directories in the non-default installation location. |
| When installing Nessus to a directory outside of the default location on a Windows host, Nessus versions prior to 10.7.3 did not enforce secure permissions for sub-directories. This could allow for local privilege escalation if users had not secured the directories in the non-default installation location. |
| Wagtail is an open source content management system built on Django. In affected versions if a model has been made available for editing through the `wagtail.contrib.settings` module or `ModelViewSet`, and the `permission` argument on `FieldPanel` has been used to further restrict access to one or more fields of the model, a user with edit permission over the model but not the specific field can craft an HTTP POST request that bypasses the permission check on the individual field, allowing them to update its value. This vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin, or by a user who has not been granted edit access to the model in question. The editing interfaces for pages and snippets are also unaffected. Patched versions have been released as Wagtail 6.0.3 and 6.1. Wagtail releases prior to 6.0 are unaffected. Users are advised to upgrade. Site owners who are unable to upgrade to a patched version can avoid the vulnerability as follows: 1.For models registered through `ModelViewSet`, register the model as a snippet instead; 2. For settings models, place the restricted fields in a separate settings model, and configure permission at the model level. |
| Danswer is the AI Assistant connected to company's docs, apps, and people. Danswer is vulnerable to unauthorized access to GET/SET of Slack Bot Tokens. Anyone with network access can steal slack bot tokens and set them. This implies full compromise of the customer's slack bot, leading to internal Slack access. This issue was patched in version 3.63. |
| The Download Monitor plugin for WordPress is vulnerable to unauthorized access to functionality due to a missing capability check on the dlm_uninstall_plugin function in all versions up to, and including, 4.9.13. This makes it possible for authenticated attackers to uninstall the plugin and delete its data. |
| YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.
|
| An RBAC authorization risk in Carina v0.13.0 and earlier allows local attackers to execute arbitrary code through designed commands to obtain the secrets of the entire cluster and further take over the cluster. |
| Ironic-image is an OpenStack Ironic deployment packaged and configured by Metal3. When the reverse proxy mode is enabled by the `IRONIC_REVERSE_PROXY_SETUP` variable set to `true`, 1) HTTP basic credentials are validated on the HTTPD side in a separate container, not in the Ironic service itself and 2) Ironic listens in host network on a private port 6388 on localhost by default. As a result, when the reverse proxy mode is used, any Pod or local Unix user on the control plane Node can access the Ironic API on the private port without authentication. A similar problem affects Ironic Inspector (`INSPECTOR_REVERSE_PROXY_SETUP` set to `true`), although the attack potential is smaller there. This issue affects operators deploying ironic-image in the reverse proxy mode, which is the recommended mode when TLS is used (also recommended), with the `IRONIC_PRIVATE_PORT` variable unset or set to a numeric value. In this case, an attacker with enough privileges to launch a pod on the control plane with host networking can access Ironic API and use it to modify bare-metal machine, e.g. provision them with a new image or change their BIOS settings. This vulnerability is fixed in 24.1.1. |
| Vite (French word for "quick", pronounced /vit/, like "veet") is a frontend build tooling to improve the frontend development experience.`server.fs.deny` does not deny requests for patterns with directories. This vulnerability has been patched in version(s) 5.2.6, 5.1.7, 5.0.13, 4.5.3, 3.2.10 and 2.9.18. |
| The Smart Slider 3 plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the upload function in all versions up to, and including, 3.5.1.22. This makes it possible for authenticated attackers, with contributor-level access and above, to upload files, including SVG files, which can be used to conduct stored cross-site scripting attacks. |
| Improper access control in some Intel(R) ME driver pack installer engines before version 2422.6.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| An Improper Certificate Validation could allow a malicious actor with access to an adjacent network to take control of the system.
Affected Products:
UniFi Connect Application (Version 3.7.9 and earlier)
UniFi Connect EV Station (Version 1.1.18 and earlier)
UniFi Connect EV Station Pro (Version 1.1.18 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.6.225 and earlier)
Mitigation:
Update UniFi Connect Application to Version 3.10.7 or later.
Update UniFi Connect EV Station to Version 1.2.15 or later.
Update UniFi Connect EV Station Pro to Version 1.2.15 or later.
Update UniFi Connect Display to Version 1.11.348 or later.
Update UniFi Connect Display Cast to Version 1.8.255 or later.
|
| An Improper Access Control could allow a malicious actor authenticated in the API to enable Android Debug Bridge (ADB) and make unsupported changes to the system.
Affected Products:
UniFi Connect EV Station (Version 1.1.18 and earlier)
UniFi Connect EV Station Pro (Version 1.1.18 and earlier)
UniFi Access G2 Reader Pro (Version 1.2.172 and earlier)
UniFi Access Reader Pro (Version 2.7.238 and earlier)
UniFi Access Intercom (Version 1.0.66 and earlier)
UniFi Access Intercom Viewer (Version 1.0.5 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.6.225 and earlier)
Mitigation:
Update UniFi Connect Application to Version 3.10.7 or later.
Update UniFi Connect EV Station to Version 1.2.15 or later.
Update UniFi Connect EV Station Pro to Version 1.2.15 or later.
Update UniFi Access G2 Reader Pro Version 1.3.37 or later.
Update UniFi Access Reader Pro Version 2.8.19 or later.
Update UniFi Access Intercom Version 1.1.32 or later.
Update UniFi Access Intercom Viewer Version 1.1.6 or later.
Update UniFi Connect Display to Version 1.11.348 or later.
Update UniFi Connect Display Cast to Version 1.8.255 or later. |
