Export limit exceeded: 421176 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54478 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-3283 | 1 Cisco | 29 Asa 5505, Asa 5505 Firmware, Asa 5510 and 26 more | 2026-08-11 | 8.6 High |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Firepower Threat Defense (FTD) Software when running on the Cisco Firepower 1000 Series platform could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a communication error between internal functions. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause a buffer underrun, which leads to a crash. The crash causes the affected device to reload. | ||||
| CVE-2020-3562 | 1 Cisco | 5 Firepower 2110, Firepower 2120, Firepower 2130 and 2 more | 2026-08-11 | 8.6 High |
| A vulnerability in the SSL/TLS inspection of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation for certain fields of specific SSL/TLS messages. An attacker could exploit this vulnerability by sending a malformed SSL/TLS message through an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. No manual intervention is needed to recover the device after it has reloaded. | ||||
| CVE-2023-20081 | 1 Cisco | 304 1100-4g Integrated Services Router, 1100-4p Integrated Services Router, 1100-6g Integrated Services Router and 301 more | 2026-08-11 | 6.8 Medium |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. | ||||
| CVE-2022-20685 | 1 Cisco | 3 Cyber Vision, Secure Firewall Threat Defense, Unified Threat Defense Snort Intrusion Prevention System Engine | 2026-08-11 | 7.5 High |
| A vulnerability in the Modbus preprocessor of the Snort detection engine could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an integer overflow while processing Modbus traffic. An attacker could exploit this vulnerability by sending crafted Modbus traffic through an affected device. A successful exploit could allow the attacker to cause the Snort process to hang, causing traffic inspection to stop.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. | ||||
| CVE-2021-34704 | 1 Cisco | 2 Adaptive Security Appliance Software, Secure Firewall Threat Defense | 2026-08-11 | 8.6 High |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | ||||
| CVE-2026-48373 | 3 Adobe, Apple, Microsoft | 6 Acrobat, Acrobat Dc, Acrobat Reader and 3 more | 2026-08-11 | 7.8 High |
| Acrobat Reader is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-16439 | 1 Eclipse | 1 Openj9 | 2026-08-11 | 9.1 Critical |
| In Eclipse OpenJ9 versions up to 0.60, using -Xtrace to trace method arguments can lead to buffer underflow. | ||||
| CVE-2026-16243 | 1 Eclipse | 1 Omr | 2026-08-11 | 7.5 High |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. | ||||
| CVE-2026-48389 | 1 Adobe | 2 Dng Sdk, Dng Software Development Kit | 2026-08-11 | 7.8 High |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-69118 | 1 Cachethq | 1 Cachet | 2026-08-11 | 8.8 High |
| Cachet through 2.4.1 contains a server-side template injection vulnerability in incident template rendering that allows authenticated users to execute arbitrary PHP code. Attackers can create malicious incident templates with Blade directives or Twig filters that execute system commands when incidents are created, achieving remote code execution as the web server process. | ||||
| CVE-2026-44880 | 1 Hpe | 157 Aos-cx, Aruba Cx 10000-48y6c \(r8p13a\), Aruba Cx 10000-48y6c \(r8p14a\) and 154 more | 2026-08-11 | 8.8 High |
| A buffer overflow vulnerability was found in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow an remote low-privileged user to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-63453 | 1 Hpe | 157 Aos-cx, Aruba Cx 10000-48y6c \(r8p13a\), Aruba Cx 10000-48y6c \(r8p14a\) and 154 more | 2026-08-11 | 7.2 High |
| Buffer overflow vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow a remote high-privileged user to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-73161 | 1 Misp | 1 Cti-transmute | 2026-08-11 | N/A |
| Affected versions of cti-transmute improperly handle conversion-table values passed through the search highlighting feature. The highlight() function previously returned the underlying text directly when no search query was supplied, or performed a regex replacement that inserted <mark> tags without first escaping the original content. Because the resulting value is used by an HTML-rendering sink, malicious markup contained in conversion data could be interpreted as HTML rather than displayed as text. The fix introduces a shared highlightMatches() helper that first converts special characters such as <, >, &, and quotes into HTML entities. Only after escaping does the code insert the application-controlled <mark> element used for search highlighting. | ||||
| CVE-2026-51536 | 2 Eipstackgroup, Opener Project | 2 Opener, Opener | 2026-08-11 | 9.1 Critical |
| In OpENer 2.3.0 (commit 76b95cf) when parsing incoming CIP (Common Industrial Protocol) network packets, the length parameter is inconsistently typed across the call stack. Specifically, an upstream length calculated as an int is passed to a downstream function that expects an EipInt16 (a 16-bit signed integer). If a maliciously crafted packet with specific length fields is processed, the length parameter can overflow or be truncated into a negative value. This negative length bypasses subsequent bounds checking (due to signed/unsigned comparison issues) and is ultimately used in memory operations, leading to a Stack Buffer Overflow when reading data in DecodePaddedEPath. | ||||
| CVE-2026-51537 | 2 Eipstackgroup, Opener Project | 2 Opener, Opener | 2026-08-11 | 9.1 Critical |
| EIPStackGroup OpENer 2.3.0 (commit 76b95cf) has an out-of-bounds read issue in Connection Manager handling of ForwardOpen requests when processing short malformed packets. An attacker can send a valid ENIP outer frame carrying a malformed CIP ForwardOpen/LargeForwardOpen request, causing the parser to continue reading fields even when request data is insufficient. This issue is remotely triggerable via network traffic and does not require authentication. | ||||
| CVE-2026-51540 | 2 Eipstackgroup, Opener Project | 2 Opener, Opener | 2026-08-11 | 9.8 Critical |
| OpENer 2.3.0 (master branch up to commit 76b95cf) is vulnerable to a severe memory corruption issue caused by an integer underflow in the processing of connected explicit messages (SendUnitData). | ||||
| CVE-2026-51541 | 2 Eipstackgroup, Opener Project | 2 Opener, Opener | 2026-08-11 | 9.1 Critical |
| OpENer 2.3.0 (commit 76b95cf) has an out-of-bounds read issue in CIP message parsing when handling malformed explicit requests with a forged EPath size. An attacker can send a valid ENIP SendRRData frame carrying a very short CIP payload whose path_size field claims that many more path words are present than are actually available. Because the parser trusts the attacker-controlled path_size and continues decoding path segments without a remaining-length boundary, it reads beyond the end of the stack receive buffer. | ||||
| CVE-2026-72913 | 1 Kovidgoyal | 1 Kitty | 2026-08-11 | 7.8 High |
| Kitty is a cross-platform GPU based terminal. Prior to 0.48.2, the @kitty-echo and @kitty-ssh DCS handlers in kitty/window.py write unauthenticated data to the child shell's stdin, where handle_remote_echo accepts printable shell command characters and handle_remote_ssh calls get_ssh_data in kittens/ssh/utils.py, which emits a newline; chaining the handlers can execute attacker-controlled commands when a user displays untrusted terminal data. This issue is fixed in version 0.48.2. | ||||
| CVE-2026-64101 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fwctl: pds: Validate RPC input size before parsing The fwctl core allocates the device-specific RPC input buffer with fwctl_rpc.in_len and passes that buffer to the driver callback. pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls pdsfc_validate_rpc(), which reads fields from that structure before checking that the input buffer is large enough to contain it. A short in_len can make pds_fwctl read beyond the allocation. Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before parsing any pds-specific fields. | ||||
| CVE-2026-64089 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix negative last_changeset_len batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response(). | ||||