| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| load_cache in GEGL before 0.4.34 allows shell expansion when a pathname in a constructed command line is not escaped or filtered. This is caused by use of the system library function for execution of the ImageMagick convert fallback in magick-load. NOTE: GEGL releases before 0.4.34 are used in GIMP releases before 2.10.30; however, this does not imply that GIMP builds enable the vulnerable feature. |
| An issue was discovered in Veritas Backup Exec before 21.2. The communication between a client and an Agent requires successful authentication, which is typically completed over a secure TLS communication. However, due to a vulnerability in the SHA Authentication scheme, an attacker is able to gain unauthorized access and complete the authentication process. Subsequently, the client can execute data management protocol commands on the authenticated connection. The attacker could use one of these commands to execute an arbitrary command on the system using system privileges. |
| An issue was discovered in Veritas Backup Exec before 21.2. It supports multiple authentication schemes: SHA authentication is one of these. This authentication scheme is no longer used in current versions of the product, but hadn't yet been disabled. An attacker could remotely exploit this scheme to gain unauthorized access to an Agent and execute privileged commands. |
| An issue was discovered in Veritas Backup Exec before 21.2. The communication between a client and an Agent requires successful authentication, which is typically completed over a secure TLS communication. However, due to a vulnerability in the SHA Authentication scheme, an attacker is able to gain unauthorized access and complete the authentication process. Subsequently, the client can execute data management protocol commands on the authenticated connection. By using crafted input parameters in one of these commands, an attacker can access an arbitrary file on the system using System privileges. |
| WatchGuard Firebox and XTM appliances allow a remote attacker with unprivileged credentials to access the system with a privileged management session via exposed management access. This vulnerability impacts Fireware OS before 12.7.2_U1, 12.x before 12.1.3_U3, and 12.2.x through 12.5.x before 12.5.7_U3. |
| In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold. The
WhatsUp.ExportUtilities.Export.GetFileWithoutZip
allows execution of commands with iisapppool\nmconsole privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix missing shutdown check
xfstests generic/730 test failed because after deleting the device
that still had dirty data, the file could still be read without
returning an error. The reason is the missing shutdown check in
->read_iter.
I also noticed that shutdown checks were missing from ->write_iter,
->splice_read, and ->mmap. This commit adds shutdown checks to all
of them. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_arm: Fix possible NPR of keep-alive thread
In case vchiq_platform_conn_state_changed() is never called or fails before
driver removal, ka_thread won't be a valid pointer to a task_struct. So
do the necessary checks before calling kthread_stop to avoid a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: don't unregister hook when table is dormant
When nf_tables_updchain encounters an error, hook registration needs to
be rolled back.
This should only be done if the hook has been registered, which won't
happen when the table is flagged as dormant (inactive).
Just move the assignment into the registration block. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Harden uretprobe syscall trampoline check
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that. |
| The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE. |
| Ghost Robotics Vision 60 v0.27.2 includes, among its physical interfaces, three RJ45 connectors and a USB Type-C port. The vulnerability is due to the lack of authentication mechanisms when establishing connections through these ports. Specifically, with regard to network connectivity, the robot's internal router automatically assigns IP addresses to any device physically connected to it. An attacker could connect a WiFi access point under their control to gain access to the robot's network without needing the credentials for the deployed network. Once inside, the attacker can monitor all its data, as the robot runs on ROS 2 without authentication by default. |
| A security flaw has been discovered in elunez eladmin up to 2.7. Affected by this issue is some unknown functionality of the file /auth/info. The manipulation results in information disclosure. The attack can be launched remotely. The exploit has been released to the public and may be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i3c: handle NULL header address
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: typec: ucsi: Introduce a ->poll_cci method
For the ACPI backend of UCSI the UCSI "registers" are just a memory copy
of the register values in an opregion. The ACPI implementation in the
BIOS ensures that the opregion contents are synced to the embedded
controller and it ensures that the registers (in particular CCI) are
synced back to the opregion on notifications. While there is an ACPI call
that syncs the actual registers to the opregion there is rarely a need to
do this and on some ACPI implementations it actually breaks in various
interesting ways.
The only reason to force a sync from the embedded controller is to poll
CCI while notifications are disabled. Only the ucsi core knows if this
is the case and guessing based on the current command is suboptimal, i.e.
leading to the following spurious assertion splat:
WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023
Workqueue: events_long ucsi_init_work [typec_ucsi]
RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
Call Trace:
<TASK>
ucsi_init_work+0x3c/0xac0 [typec_ucsi]
process_one_work+0x179/0x330
worker_thread+0x252/0x390
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Thus introduce a ->poll_cci() method that works like ->read_cci() with an
additional forced sync and document that this should be used when polling
with notifications disabled. For all other backends that presumably don't
have this issue use the same implementation for both methods. |
| Improper validation of some components used by the rollback mechanism in Trend Micro Apex One and Trend Micro Apex One as a Service clients could allow a Apex One server administrator to instruct affected clients to download an unverified rollback package, which could lead to remote code execution. Please note: an attacker must first obtain Apex One server administration console access in order to exploit this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix peer devlink set for SF representor devlink port
The cited patch change register devlink flow, and neglect to reflect
the changes for peer devlink set logic. Peer devlink set is
triggering a call trace if done after devl_register.[1]
Hence, align peer devlink set logic with register devlink flow.
[1]
WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180
CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core]
RIP: 0010:devlink_rel_nested_in_add+0x177/0x180
Call Trace:
<TASK>
? __warn+0x78/0x120
? devlink_rel_nested_in_add+0x177/0x180
? report_bug+0x16d/0x180
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? devlink_port_init+0x30/0x30
? devlink_port_type_clear+0x50/0x50
? devlink_rel_nested_in_add+0x177/0x180
? devlink_rel_nested_in_add+0xdd/0x180
mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core]
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc5/0x3a0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x64f/0x860
__auxiliary_device_add+0x3b/0xa0
mlx5_sf_dev_add+0x139/0x330 [mlx5_core]
mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
process_one_work+0x13f/0x2e0
worker_thread+0x2bd/0x3c0
? rescuer_thread+0x410/0x410
kthread+0xc4/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: Fix an error check in npcm_video_ece_init()
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV. |
| An improper access control vulnerability has been identified in the SonicWall SonicOS management access, potentially leading to unauthorized resource access and in specific conditions, causing the firewall to crash. This issue affects SonicWall Firewall Gen 5 and Gen 6 devices, as well as Gen 7 devices running SonicOS 7.0.1-5035 and older versions. |
| Zoho ManageEngine Desktop Central is vulnerable to authentication bypass, leading to remote code execution on the server, as exploited in the wild in December 2021. For Enterprise builds 10.1.2127.17 and earlier, upgrade to 10.1.2127.18. For Enterprise builds 10.1.2128.0 through 10.1.2137.2, upgrade to 10.1.2137.3. For MSP builds 10.1.2127.17 and earlier, upgrade to 10.1.2127.18. For MSP builds 10.1.2128.0 through 10.1.2137.2, upgrade to 10.1.2137.3. |
