| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper authentication in Windows DHCP Server allows an authorized attacker to bypass a security feature locally. |
| Heap-based buffer overflow in Windows Kernel-Mode Drivers allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Security Center allows an authorized attacker to elevate privileges locally. |
| Reliance on untrusted inputs in a security decision in Microsoft Office Word allows an unauthorized attacker to bypass a security feature locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: return error early if file xattr cannot be changed
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4]
Call Trace:
__ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
__vfs_setxattr+0x9a/0xd0
__vfs_setxattr_noperm+0x76/0x1f0
ima_appraise_measurement+0x23e/0xe40
ima_d_path+0x5a/0xd0
process_measurement+0xb29/0xc40
? copy_from_kernel_nofault+0x21/0xe0
? fscrypt_file_open+0xc0/0xe0
? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126
? __bpf_prog_exit+0x23/0xd0
? __bpf_tramp_exit+0xd/0x50
? bpf_trampoline_6442530367+0x9f/0xea
ima_file_check+0x57/0x80
security_file_post_open+0x50/0xf0
path_openat+0x493/0x1650
do_filp_open+0xc7/0x170
Detect the state of the file early and return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: reject short monitor TX frames
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets the writer leave
the recovery path without spinning. |
| Tokio is a runtime for writing applications with Rust. In 1.54.0, a race condition between tokio::time::Interval::poll_tick (including .tick().await) and the multi-threaded runtime's time driver could drop an internal timer entry without synchronizing with the driver thread that was firing it. The race caused a use-after-free on the timer's waker and task state in safe Rust, which could produce assertion panics, task reference-count corruption, or heap memory corruption. This issue is fixed in 1.54.1. |
| A flaw was found in Kruize Autotune. Its REST API ships without an authentication layer, and the endpoints that return datasource configuration — the list-datasources endpoint (GET /datasources) and the datasource-metadata endpoint — serialized datasource objects using a default Gson configuration with no field-exclusion strategy. As a result, the authentication secrets stored for each configured monitoring datasource (basic-auth passwords, bearer tokens, API keys, and OAuth2 client secrets) were returned in cleartext to any client able to reach the service. An attacker with network access to Autotune could harvest these credentials and reuse them to authenticate to the backing monitoring stack. |
| IBM MQ could allow an authenticated attacker to cause potential process instability due to an off-by-one buffer overflow when processing specially crafted object names. |
| IBM MQ 9.4.5.0 through 9.4.5.1 could allow an authenticated user to cause a denial of service by sending a specially crafted message that crashes consuming applications. |
| Traefik before 2.11.46, 3.x before 3.6.17, and 3.7.0 lack namespace validation for Ingress and Service annotations in the Kubernetes Ingress provider, allowing references to Middlewares, ServersTransports, and TLSOptions in other namespaces. Attackers able to create or update Ingress or Service resources in one namespace can set router.middlewares or service.serverstransport annotations to obtain another tenant's injected credentials or reuse its client certificates, bypassing namespace-based tenant isolation. |
| Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() resets TIFF frame state, so an embedded TIFF with at least three IFDs never advances. When an application with olefile installed reads n_frames or saves all frames from a crafted MIC file, the non-advancing traversal can hold a worker at full CPU indefinitely. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: em_text: reject unterminated algo before autoload
This is a follow-up to commit 9c572a83037a ("net/sched: fix potential
stack infoleak in em_text_dump()"), which zero-initialised the dump-side
struct. Sashiko pointed at a pre-existing bug that exposed the change-side
input-validation gap open.
em_text_change() casts the raw netlink attribute payload to struct
tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL
terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry
textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf()
walks %s until it finds a NUL, so an algo[] with no NUL reads past the
array into the adjacent struct fields and payload and feeds those bytes
to the usermode helper command line. This is an out-of-bounds read and
a kernel memory disclosure.
Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes,
matching the check xt_string has had since 3ab720881b6e.
Conditions to recreate the bug:
- CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn
is enough)
- install clsact on an interface, then add a basic filter with one text
ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and
pattern_len at least 1
- the add fails with -ENOENT and the kernel invokes modprobe with a
module name made of "ts_" plus the 16 bytes and the adjacent payload |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: exar: initialize the ID before registering its cleanup
devm_add_action_or_reset() invokes the cleanup action immediately when
registering the action fails. gpio_exar_probe() currently stores the
allocated ID in exar_gpio only after registering the action, so that
failure makes exar_devm_ida_free() release ID 0. If the allocated ID is
nonzero, this leaks that ID and can free ID 0 belonging to another device.
Store the ID before registering the cleanup action so both the immediate
failure path and normal device teardown release the correct allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range-to-eof file size exchange
Norbert Szetei posted a patch containing an incomplete description of a
bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks
exchange-range into modifying a file so that it has shared blocks
starting beyond EOF, which is never allowed because files never have
written data beyond EOF, and you can only share written data blocks.
This is key to all the incorrect behavior that follows.
Eventually I got from Norbert a description of what's going wrong:
> Fair. Here it is with physical block numbers, 4k blocks. peer is the file
> that gets rewritten and file1 is the one that ends up with the flag
> cleared.
>
> Start, nothing shared:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [201] [202]
> donor1 size 4096 -> [300]
> donor2 size 4096 -> [400]
>
> 1. FICLONERANGE peer's block into file1's middle slot:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [100] [202] reflink flag set
> ^^^^^ both files own block 100
>
> 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0,
> file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes
> are exchanged with it:
>
> file1 size 4096 -> [200] [100] [300] reflink flag set
> ^^^^^^^^^^^ still owned, now past the size
> donor1 size 12288 -> [202]
>
> file1 says it is one block long while it still owns three. Nothing was
> unmapped. file2_offset is block 2, so this exchange cannot clear a flag.
>
> 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096.
> By i_disk_size this is two one-block files exchanging everything, so
> xmi_can_exchange_reflink_flags() agrees and the flag is cleared:
>
> file1 size 4096 -> [400] [100] [300] reflink flag CLEARED
> donor2 size 4096 -> [200]
>
> Block 100 is still shared with peer.
>
> 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100.
> xfs_is_cow_inode(file1) is false, so no CoW:
>
> peer size 4096 -> [100] same block, new contents
>
> Block 100 is the only one that matters here. PoC below, it reads a file
> called peer in the current directory. The filesystem needs reflink and
> exchange-range, which mkfs.xfs 7.x turns on by default.
So yes, TO_EOF is screwing up the file size even if it's actually
exchanging the data block correctly. The following is the intended
behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage:
"Ignore the length parameter. All bytes in file1_fd from file1_offset
to EOF are moved to file2_fd, and file2's size is set to
(file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in
file2 from file2_offset to EOF are moved to file1 and file1's size is
set to (file1_offset+(file2_length-file2_offset))."
In other words, if we only exchange a portion of the file data, then we
should only exchange the portion of the file size that relates to the
exchanged data. Unfortunately, the code swaps the ondisk file size and
the incore file sizes, which is incorrect if the caller passes in a
nonzero offset.
Having confused the file sizes, the PoC uses a second exchange-range
call on what looks like a non-reflinked single-block file. Because the
file size is set incorrectly, exchange-range thinks it's exchanging the
full contents of two files and clears the reflink flag on the broken
file. That enables an extending write of the broken file to rewrite the
shared block that's just past EOF. This has become known colloquially
as refluxfs.
Once the file sizes are set correctly, the second exchange-range no
longer thinks that it's doing a full-contents swap, so it won't clear
the reflink flag on either of its file arguments.
Norbert followed up to an earlier version of this patch with a second
complaint about us not handling the i_disk_size state correctly:
> The offsets are bounded against the incore i_size but subtracted from
>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: handle mount locking for automounts correctly
If mounts are propagated across user namespaces, attach_recursive_mnt()
locks every copy of the source mount to protect overmounts from
vanishing and revealing the underlying files or directories.
The user namespace is taken from the caller's mount namespaces since
this is where the mounts end up. Except, that's not always true.
Automounts may legitimately get popped in by tasks located in a
different mount and user namespace during path lookup.
Then check doesn't make sense at that point. The copy in the namespace
of the parent - which may be the host's - is now locked and the host
cannot change the flags of its own mounts anymore.
Here's the reproducer:
- host has debugfs mounted nosuid,nodev,noexec and shared
- tracefs automount below it is not yet active
- hand a child process a directory descriptor on that mount
- child process enters auser and mount namespace
- child process' namespace now holds a locked copy of the host's debugfs
mount that receives propagation from it
- child process stats "tracing/." through the descriptor
- lookup runs on the host's mount so the automount lands below the host's mount
- propagation puts a copy below the child's copy
- both try to clear the flags on the mount they got, with a bind remount:
host, on its own automount: MS_REMOUNT|MS_BIND = EPERM
child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0
So the lock landed on the host's mount instead of the child's copy.
Congrats. So we need to compare with the owner of the namespace the
mount actually gets mounted on. For all regular cases that is the
caller's mount namespace and so nothing changes.
Detached trees in anonymous mount namespaces by be handed over via
SCM_RIGHTS or inherited in other ways on purpose so the attaching task's
mount namespace is authoritative, not the creator of the detached tree. |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: don't drop active namespace references that were never taken
Active references on the namespaces of an nsproxy are taken when the
nsproxy is installed into a task in switch_task_namespaces() and
copy_namespaces() and dropped again by put_nsproxy() through
deactivate_nsproxy().
But ksys_unshare() calls put_nsproxy() on an nsproxy that was never
installed when set_cred_ucounts() fails. The new namespaces of that
nsproxy go from zero to minus one and the namespaces shared with the
caller lose a reference that belongs to the nsproxy the caller keeps
using:
WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230
nsproxy_ns_active_put
deactivate_nsproxy
ksys_unshare
Afterwards the namespaces the caller lives in aren't listed by listns()
anymore. set_cred_ucounts() only fails when alloc_ucounts() can't
allocate and it only allocates when the real uid of the caller differs
from its effective uid.
Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify
create_new_namespaces()") separated the two cases on purpose.
nsproxy_free() frees an nsproxy that was prepared but never installed
and that's what a failed setns() uses in put_nsset(). Export it and use
it for a failed unshare() as well. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: don't put a mountpoint on a dentry that's being removed
rmdir(), unlink() and rename() call dont_mount() on the victim and then
detach_mounts() with the victim's inode locked. do_lock_mount() takes
the inode lock of the mountpoint and checks cant_mount() so a mount
can't show up after detach_mounts().
But attach_recursive_mnt() makes a second mountpoint for the root of the
source mount so that the mounts already located at the destination can
be put on top of it. No inode is locked for that one and d_set_mounted()
only refuses a dentry that is unlinked. Between detach_mounts() and
d_delete() the victim is still hashed:
rmrace: b passed dont_mount() and detach_mounts(), sleeping
T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 ()
T1: rmdir(/tmp/plcant/d/b) = 0 errno 0
109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw
108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw
A bind mount of the directory that's being removed is moved beneath an
existing mount while the rmdir() is located between the two calls. The
mount ends up on the removed directory and nothing will ever detach it.
Check cant_mount() in d_set_mounted() as well. dont_mount() raises the
flag under d_lock before detach_mounts() runs so either the mountpoint
is set first and detach_mounts() finds the mount or the flag is seen and
the mount is refused. |
