| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: fix tx.buf use-after-free in isotp_sendmsg()
isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access
to so->tx.buf. isotp_release() waits for ISOTP_IDLE via
wait_event_interruptible() and then calls kfree(so->tx.buf).
If a signal interrupts the wait_event_interruptible() inside close()
while tx.state is ISOTP_SENDING, the loop exits early and release
proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)
while sendmsg may still be reading so->tx.buf for the final CAN frame
in isotp_fill_dataframe().
The so->tx.buf can be allocated once when the standard tx.buf length needs
to be extended. Move the kfree() of this potentially extended tx.buf to
sk_destruct time when either isotp_sendmsg() and isotp_release() are done. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Fix double free in dma-buf feature
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: save ailp before dropping the AIL lock in push callbacks
In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock
is dropped to perform buffer IO. Once the cluster buffer no longer
protects the log item from reclaim, the log item may be freed by
background reclaim or the dquot shrinker. The subsequent spin_lock()
call dereferences lip->li_ailp, which is a use-after-free.
Fix this by saving the ailp pointer in a local variable while the AIL
lock is held and the log item is guaranteed to be valid. |
| The Bluetooth LE host queues received L2CAP connection-oriented channel (CoC) data for deferred processing through a struct k_work embedded in the channel object (le_chan->rx_work, handler l2cap_rx_process()) whenever the channel uses a dynamic PSM (0x0080-0x00FF). Channel teardown in l2cap_chan_destroy() in subsys/bluetooth/host/l2cap.c cancels the retransmission-timeout work and drains the RX FIFO, but never cancels rx_work. Because that work item was submitted to the system workqueue while HCI receive processing runs on the dedicated Bluetooth RX workqueue (CONFIG_BT_RECV_WORKQ_BT, the default), a queued rx_work item can outlive the channel it points into.
A remote, unauthenticated peer with an established CoC channel triggers this by sending a data K-frame immediately followed by an L2CAP Disconnect Request. The K-frame submits rx_work to the system workqueue; because both workqueue threads are cooperative and the Bluetooth RX workqueue runs at the higher priority (K_PRIO_COOP(CONFIG_BT_RX_PRIO) versus CONFIG_SYSTEM_WORKQUEUE_PRIORITY), the pending item cannot run before the following Disconnect Request is processed in le_disconn_req() -> l2cap_chan_del() -> l2cap_chan_destroy(). The stack then invokes the released() callback, which the API documents as meaning the stack has dropped all references and the application may free the channel memory.
The application therefore frees or re-accepts into an object that the system workqueue still holds in its pending list. If the memory is freed and reallocated, the workqueue later dereferences a list node and a handler function pointer read from reused memory; if the object is re-used for a later connection, l2cap_chan_add() calls k_work_init() on a still-enqueued work item, corrupting the workqueue's pending list so that unrelated work items are dropped or the queue spins on a looped list. A related variant lets l2cap_rx_process() run concurrently with teardown, racing the net_buf unref of le_chan->_sdu and the clearing of chan->conn.
The fix routes the channel RX work to the Bluetooth workqueue - the same context in which every teardown path runs - and adds an explicit k_work_cancel() of le_chan->rx_work in l2cap_chan_destroy(), so no reference to the channel survives the released() callback. Configurations without CONFIG_BT_L2CAP_DYNAMIC_CHANNEL, or that only use SIG-assigned PSMs (EATT 0x0027, OTS 0x0025) which take the inline receive path, are not affected. |
| Improper resolution of path equivalence in Visual Studio Code allows an unauthorized attacker to bypass a security feature locally. |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| Double free in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Failover Cluster allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Broadcast DVR User Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
