| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory corruption in ANGLE in Google Chrome on on Windows prior to 156.0.8078.47 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Memory corruption in Actor in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix subreq ref leak
Fix a subrequest ref leak in netfs_unbuffered_write() in the event that
subreq->io_iter ends up zero length during preparation. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and argmax, which is 72 failures of the Teflon test suite on an i.MX93.
Truncating rounding (1) is misread as well: it picks the two-tile
address path and computes a bogus feature map size from tile bases the
command stream never set.
Read the field as a storage mode only on the hardware where it is one. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in VillaTheme Photo Reviews for WooCommerce woo-photo-reviews allows Leveraging Race Conditions.This issue affects Photo Reviews for WooCommerce: from n/a through 1.2.31. |
| vLLM is an inference and serving engine for large language models. From 0.11.1 until 0.32.0, the DeepSeek-OCR, DeepSeek-OCR-2, and Unlimited-OCR image path allows a remote client that can reach the OpenAI-compatible API to submit a legal image whose normalized pixels sum to zero when that image is alone in its per-step encoder batch. _parse_and_validate_image_input returns no embedding, embed_multimodal propagates that value, and sanity_check_mm_encoder_outputs triggers a fatal assertion that shuts down the engine for all users. This issue is fixed in version 0.32.0. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.32.0, the Phi-4 multimodal audio encoder in phi4mm_audio.py and phi4mm_utils.py uses eager attention by default, allowing a remote client to submit one legal long audio clip that causes MultiHeadedAttention.forward_attention to materialize and retain full attention matrices in self.attn. The scaled dot-product attention branch does not materialize these matrices. The resulting quadratic GPU-memory use can cause an out-of-memory condition and terminate EngineCore for all users. This issue is fixed in version 0.32.0. |
| Python Social Auth is a social authentication and registration mechanism. Prior to 6.2.0, OpenIdConnectAuth in social_core/backends/open_id_connect.py uses get_and_store_nonce to place the OpenID Connect nonce in a shared OpenIdConnectAssociation table, and get_nonce and validate_claims verify only that the nonce exists and has not expired rather than binding it to the browser session and OAuth state that initiated the login. An attacker who obtains a victim's unused authorization code can start a separate login to obtain valid state for the attacker's browser, submit the victim's code with that state, and pass nonce validation because the victim nonce is globally available. With DEFAULT_USE_PKCE disabled in the default OpenIdConnectAuth configuration, the attacker can be logged in as the victim. This issue is fixed in version 6.2.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.32.0, vllm/tokenizers/hf.py computes max_token_id with an off-by-one upper bound, allowing a pre-tokenized prompt ID equal to the vocabulary size to pass validation. For a tensor-parallel size of one and an exact multiple-of-64 vocabulary, VocabParallelEmbedding.forward does not mask that value before F.embedding uses it, causing a CUDA device-side assertion and terminating the engine. This issue is fixed in version 0.32.0. |
| HashiCorp Consul and Consul Enterprise 1.17.0 up to 2.0.4 are vulnerable to an authorization bypass in the agent's service mesh leaf certificate API that may allow an attacker without a valid ACL token to retrieve a cached service leaf certificate and its private key. This vulnerability (CVE-2026-105765) is fixed in Consul Community Edition 2.1.0 and Consul Enterprise 2.1.0 and 1.21.19. |
| A security flaw has been discovered in BKWLD Decoy up to 5.11.1. The impacted element is an unknown function of the file Policy.php of the component Authorization Policy. The manipulation of the argument role results in improper privilege management. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| IBM QRadar SIEM could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service. |
| The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation handlers aes_ecb_op(), aes_cbc_op() and aes_ctr_op() then ran aes_hal_transform_block() against whatever key and direction the registers happened to hold.
As a result, once a second session is opened with a different key, every subsequent operation on the first session silently uses the second session's key and direction, and no error is reported. Because the key programming happened outside the lock, the correct usage pattern of "each thread does begin, then op, then free on its own session" also races: a second thread's cipher_begin_session() landing between the first thread's begin and its operation makes that operation run under the second thread's key. An attacker who can induce session creation on the device — for example a protocol peer whose connection causes a session key to be installed — can influence which key is resident when a victim operation runs.
The impact is a cryptographic failure rather than memory corruption: data the application believed it was protecting under one key is encrypted or decrypted under another. Where the resident key is one the attacker knows or supplied, the affected plaintext becomes recoverable by that attacker, and the operation's direction (encrypt versus decrypt) can likewise be inverted. Exposure requires an application that holds two or more concurrent sessions with different keys against this driver; no in-tree Zephyr subsystem does so today (the 802.15.4 security layer, which does open two sessions, uses CCM mode, which this driver rejects), so the risk falls on application code that uses the documented multi-session API.
The fix removes all hardware access from aes_begin_session() and reprograms the key and direction at the top of every operation, inside aes_lock, so the chip-global registers can no longer be observed stale by another session. |
| In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed.
The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer's SDP record requires no pairing, and the peer can also trigger the failure by dropping the ACL or racing an RFCOMM DLC on the same DLCI at the right moment.
When the SDP client next advances its request list, sdp_client_discover() dereferences the zeroed parameters — net_buf_alloc(param->pool, …) with a NULL pool and param->uuid->type — and the result-notification paths call through the NULL params->func. Zeroing a linked node also truncates the request list behind a stale tail pointer, and re-arming the freed AG slot re-appends the same node and can produce a self-looping list that hangs the Bluetooth RX thread. The impact is a crash or hang of the Bluetooth stack; the written value is a constant zero at a fixed static address, so no attacker-controlled write is available.
Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_AG that use the Audio Gateway role are affected. |
| bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation.
The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, so a remote device advertising an HFP AG record with an RFCOMM channel outside 1-30 makes bt_rfcomm_dlc_connect() return -EINVAL and drives the local device into the wipe. The same branch is reached without any application misuse when the remote peer controls connection timing, for example when the RFCOMM session is in BT_RFCOMM_STATE_DISCONNECTING or the ACL is dropped between object creation and the RFCOMM call.
Once the object has been wiped, the Bluetooth host continues to use it: sdp_client_alloc_buf() dereferences session->param->pool, which is now NULL, and the SDP receive paths call session->param->func() through a null function pointer, neither of which is NULL-checked. Because the wipe also clears hf->acl, the pool slot is considered free and a retry or an incoming HFP connection re-appends the same still-linked list node, turning session->reqs into a self-referential list that the host's list walkers never leave. The result is a fault or an unrecoverable hang in the Bluetooth host thread; the stray indirect call is through an all-zero pointer whose target the attacker does not control, so the practical impact is denial of service.
The fix keeps the object allocated and marks it with a new BT_HFP_HF_FLAG_RELEASING flag, letting bt_hfp_hf_discover_cb() release it once the discovery completes instead of destroying it under the SDP client. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_HF enabled are affected. |
| The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer.
The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path.
On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations. |
