| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix circular lock dependency in ext4_ext_migrate
Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a
circular lock dependency between s_writepages_rwsem and sb_internal
(freeze protection).
The deadlock scenario:
CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount)
---- ----
ext4_ext_migrate()
ext4_writepages_down_write()
s_writepages_rwsem (write)
ext4_evict_inode()
sb_start_intwrite() [sb_internal]
...
ext4_writepages()
s_writepages_rwsem (read) [BLOCKED]
iput(tmp_inode)
ext4_evict_inode()
sb_start_intwrite() [BLOCKED]
The tmp_inode is a temporary inode with nlink=0 created solely for
building the extent tree. Its eviction does not require
s_writepages_rwsem protection, so deferring iput() until after
releasing the rwsem is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: propagate IPI init errors to prevent use-after-free
When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails),
the error path frees the global xive_ipis array. However,
xive_smp_probe() previously ignored this failure and proceeded to
call xive_setup_cpu_ipi(), which dereferences the already-freed
xive_ipis pointer -- a use-after-free.
Now that xive_smp_probe() returns int (previous patch), propagate
the error from xive_init_ipis() and xive_setup_cpu_ipi() through
xive_smp_probe(). Check the return value in both pnv_smp_probe()
and pSeries_smp_probe() so that IPI setup is aborted cleanly on
failure, avoiding the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: bus: Introduce acpi_bus_get_primary_device()
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: fix swapped arguments in nlmsvc_match_ip()
When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip,
nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server
sockaddr as the opaque @data argument:
nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL);
The match callback is later invoked from nlm_traverse_locks() as:
match(lockhost, host);
where the first argument is the nlm_host that owns the lock, and the
second argument is the @data that was originally passed down (here the
server sockaddr). This is the convention every other match callback
relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()):
arg1 is the real nlm_host, arg2 is the caller-supplied reference value.
nlmsvc_match_ip() has had these two arguments reversed ever since the
unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd:
unlock lockd locks associated with a given server ip"):
return rpc_cmp_addr(nlm_srcaddr(host), datap);
Here @host is actually the server sockaddr, so nlm_srcaddr(host)
dereferences a struct sockaddr as a struct nlm_host and reads garbage
at the offset of h_srcaddr; meanwhile @datap is actually the lock
owner's nlm_host but is compared as a sockaddr. As a result the
comparison practically never matches and locks are not released for the
requested IP.
Swap the arguments so the lock owner's source address is compared
against the requested server address:
return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host);
[ cel: fix the misleading typedef parameter names too ] |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Write/Reply chunks with segcount 0
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Manage teardown with devm
arm_smmu_device_remove() manually frees the IOPF queue, destroys the
vmid_map and disables the device, while the IRQs and queues are devm
managed. devm unwinds only after remove() returns, so the cleanup runs
in the wrong order. The IOPF queue is freed before the event-queue IRQ
whose handler uses it.
Manage all of it with devm so the unwind order is correct. Free the IOPF
queue and vmid_map via devm actions, and disable the device from one
registered after arm_smmu_device_reset().
This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC
use-after-free in the subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix use-after-free of master->this
sysfs attribute callbacks for the master controller device dereference
master->this. However, master->this is freed in
i3c_master_detach_free_devs() before the master device itself is
released.
As a result, sysfs accesses can dereference a freed master->this
pointer, leading to a use-after-free.
Keep master->this alive until i3c_masterdev_release(), which is called
after the master device and its sysfs state are being torn down. Do not
free master->this as part of the normal device detach path.
On the error path in i3c_master_set_info(), reset master->this and
bus.cur_master to NULL before freeing the allocated device. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: virtio_pmem: refcount requests for token lifetime
KASAN reports slab-use-after-free in __wake_up_common():
BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160
Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux
1.17.0-2-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x6d/0xb0
print_report+0x170/0x4e2
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __virt_addr_valid+0x1dc/0x380
kasan_report+0xbc/0xf0
? __wake_up_common+0x114/0x160
? __wake_up_common+0x114/0x160
__wake_up_common+0x114/0x160
? __pfx__raw_spin_lock_irqsave+0x10/0x10
__wake_up+0x36/0x60
virtio_pmem_host_ack+0x11d/0x3b0
? sched_balance_domains+0x29f/0xb00
? __pfx_virtio_pmem_host_ack+0x10/0x10
? _raw_spin_lock_irqsave+0x98/0x100
? __pfx__raw_spin_lock_irqsave+0x10/0x10
vring_interrupt+0x1c9/0x5e0
? __pfx_vp_interrupt+0x10/0x10
vp_vring_interrupt+0x87/0x100
? __pfx_vp_interrupt+0x10/0x10
__handle_irq_event_percpu+0x17f/0x550
? __pfx__raw_spin_lock+0x10/0x10
handle_irq_event+0xab/0x1c0
handle_fasteoi_irq+0x276/0xae0
__common_interrupt+0x65/0x130
common_interrupt+0x78/0xa0
</IRQ>
virtio_pmem_host_ack() wakes a request that has already been freed by the
submitter.
This happens when the request token is still reachable via the virtqueue,
but virtio_pmem_flush() returns and frees it.
Fix the token lifetime by refcounting struct virtio_pmem_request.
virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an
extra reference once the request is queued. The completion path drops the
virtqueue reference, and the submitter drops its reference before
returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Clear queue->active_job when v3d_fence_create() fails
The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming
job to queue->active_job before calling v3d_fence_create(). If
v3d_fence_create() fails, the callback returns NULL without clearing
active_job, leaving a dangling pointer.
Create a failure path in all run_job() callbacks that clears the active
job before returning NULL. The BIN path takes queue->queue_lock around the
clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD
paths have no concurrent reader, so the clear is lock-free. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Clamp mailbox output allocation to the payload size
CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload
size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls
kvzalloc(out.size). A large out.size drives a huge allocation, above
INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics.
The transport __cxl_pci_mbox_send_cmd() already clamps the response copy
to min(out.size, payload_size, device len), so the output buffer is
never written beyond payload_size. Clamp the allocation to payload_size
too, matching the RAW path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in plane reset function
amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
