| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: check for stable address space before operating on the VMA
It is possible to hit a zero entry while traversing the vmas in unuse_mm()
called from swapoff path and accessing it causes the OOPS:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000446--> Loading the memory from offset 0x40 on the
XA_ZERO_ENTRY as address.
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
The issue is manifested from the below race between the fork() on a
process and swapoff:
fork(dup_mmap()) swapoff(unuse_mm)
--------------- -----------------
1) Identical mtree is built using
__mt_dup().
2) copy_pte_range()-->
copy_nonpresent_pte():
The dst mm is added into the
mmlist to be visible to the
swapoff operation.
3) Fatal signal is sent to the parent
process(which is the current during the
fork) thus skip the duplication of the
vmas and mark the vma range with
XA_ZERO_ENTRY as a marker for this process
that helps during exit_mmap().
4) swapoff is tried on the
'mm' added to the 'mmlist' as
part of the 2.
5) unuse_mm(), that iterates
through the vma's of this 'mm'
will hit the non-NULL zero entry
and operating on this zero entry
as a vma is resulting into the
oops.
The proper fix would be around not exposing this partially-valid tree to
others when droping the mmap lock, which is being solved with [1]. A
simpler solution would be checking for MMF_UNSTABLE, as it is set if
mm_struct is not fully initialized in dup_mmap().
Thanks to Liam/Lorenzo/David for all the suggestions in fixing this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: Check return value of platform_get_resource()
platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: check the return value of pinmux_ops::get_function_name()
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Call trace:
dma_release_channel+0x2c/0x120 (P)
pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test]
pci_epc_deinit_notify+0x74/0xc0
tegra_pcie_ep_pex_rst_irq+0x250/0x5d8
irq_thread_fn+0x34/0xb8
irq_thread+0x18c/0x2e8
kthread+0x14c/0x210
ret_from_fork+0x10/0x20
[mani: trimmed the stack trace] |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: fix uninit-value in squashfs_get_parent
Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.
This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number. In particular the inode number
is that of a symbolic link, rather than a directory.
Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.
unsigned int parent_ino = squashfs_i(inode)->parent;
Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.
The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.
Regular inodes used to share the parent field with the block_list_start
field. This is removed in this commit to enable the parent field to
contain the invalid inode number 0. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix crypto buffers in non-linear memory
The crypto API, through the scatterlist API, expects input buffers to be
in linear memory. We handle this with the cifs_sg_set_buf() helper
that converts vmalloc'd memory to their corresponding pages.
However, when we allocate our aead_request buffer (@creq in
smb2ops.c::crypt_message()), we do so with kvzalloc(), which possibly
puts aead_request->__ctx in vmalloc area.
AEAD algorithm then uses ->__ctx for its private/internal data and
operations, and uses sg_set_buf() for such data on a few places.
This works fine as long as @creq falls into kmalloc zone (small
requests) or vmalloc'd memory is still within linear range.
Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so too
many tasks will increment the base stacks' addresses to a point where
virt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when that
happens.
In practice: too many parallel reads and writes on an encrypted mount
will trigger this bug.
To fix this, always alloc @creq with kmalloc() instead.
Also drop the @sensitive_size variable/arguments since
kfree_sensitive() doesn't need it.
Backtrace:
[ 945.272081] ------------[ cut here ]------------
[ 945.272774] kernel BUG at include/linux/scatterlist.h:209!
[ 945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary)
[ 945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[ 945.276877] Workqueue: writeback wb_workfn (flush-cifs-2)
[ 945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220
[ 945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b
[ 945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246
[ 945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030
[ 945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070
[ 945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000
[ 945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070
[ 945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010
[ 945.284407] FS: 0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000
[ 945.285262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0
[ 945.286683] Call Trace:
[ 945.286952] <TASK>
[ 945.287184] ? crypt_message+0x33f/0xad0 [cifs]
[ 945.287719] crypto_gcm_encrypt+0x36/0xe0
[ 945.288152] crypt_message+0x54a/0xad0 [cifs]
[ 945.288724] smb3_init_transform_rq+0x277/0x300 [cifs]
[ 945.289300] smb_send_rqst+0xa3/0x160 [cifs]
[ 945.289944] cifs_call_async+0x178/0x340 [cifs]
[ 945.290514] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 945.291177] smb2_async_writev+0x3e3/0x670 [cifs]
[ 945.291759] ? find_held_lock+0x32/0x90
[ 945.292212] ? netfs_advance_write+0xf2/0x310
[ 945.292723] netfs_advance_write+0xf2/0x310
[ 945.293210] netfs_write_folio+0x346/0xcc0
[ 945.293689] ? __pfx__raw_spin_unlock_irq+0x10/0x10
[ 945.294250] netfs_writepages+0x117/0x460
[ 945.294724] do_writepages+0xbe/0x170
[ 945.295152] ? find_held_lock+0x32/0x90
[ 945.295600] ? kvm_sched_clock_read+0x11/0x20
[ 945.296103] __writeback_single_inode+0x56/0x4b0
[ 945.296643] writeback_sb_inodes+0x229/0x550
[ 945.297140] __writeback_inodes_wb+0x4c/0xe0
[ 945.297642] wb_writeback+0x2f1/0x3f0
[ 945.298069] wb_workfn+0x300/0x490
[ 945.298472] process_one_work+0x1fe/0x590
[ 945.298949] worker_thread+0x1ce/0x3c0
[ 945.299397] ? __pfx_worker_thread+0x10/0x10
[ 945.299900] kthr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix double free in user_cluster_connect()
user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then
the error handling frees "lc" a second time. Set "lc" to NULL on this
path to avoid a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed(). |
| ETERNUS SF provided by Fsas Technologies Inc. contains an incorrect default permissions vulnerability. A low-privileged user with access to the management server may obtain database credentials, potentially allowing execution of OS commands with administrator privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: Fix use-after-free in hdm_disconnect
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: catch commit test ctx alloc failure
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers
Devices without the AWCC interface don't initialize `awcc`. Add a check
before dereferencing it in sleep handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure. |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. A vulnerability within the Datadog Linux Host Agent versions 7.65.0 through 7.70.2 exists due to insufficient permissions being set on the `opt/datadog-agent/python-scripts/__pycache__` directory during installation. Code in this directory is only run by the Agent during Agent install/upgrades. This could allow an attacker with local access to modify files in this directory, which would then subsequently be run when the Agent is upgraded, resulting in local privilege escalation. This issue requires local access to the host and a valid low privilege account to be vulnerable. Note that this vulnerability only impacts the Linux Host Agent. Other variations of the Agent including the container, kubernetes, windows host and other agents are not impacted. Version 7.71.0 contains a patch for the issue. |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. |
| PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: limit the level of fs stacking for file-backed mounts
Otherwise, it could cause potential kernel stack overflow (e.g., EROFS
mounting itself). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb()
The rtl8187_rx_cb() calculates the rx descriptor header address
by subtracting its size from the skb tail pointer.
However, it does not validate if the received packet
(skb->len from urb->actual_length) is large enough to contain this
header.
If a truncated packet is received, this will lead to a buffer
underflow, reading memory before the start of the skb data area,
and causing a kernel panic.
Add length checks for both rtl8187 and rtl8187b descriptor headers
before attempting to access them, dropping the packet cleanly if the
check fails. |
