| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ice_adapter: release xa entry on adapter allocation failure
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix debug checking for np-guests using huge mappings
When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then
the debug checking in assert_host_shared_guest() fails on the launch of an
np-guest. This WARN_ON() causes a panic and generates the stack below.
In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping
is a single page but it may be a block map. Update the checking so that
the size is not checked and just assumes the correct size.
While we're here make the same fix in __pkvm_host_mkyoung_guest().
Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128
Info: Removed ghost socket file "/.lkvm//guest-128.sock".
[ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088!
[ 1406.521804] kvm [141]: nVHE call trace:
[ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8
[ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c
[ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104
[ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c
[ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8
[ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
[ 1406.522454] kvm [141]: ---[ end nVHE call trace ]---
[ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000
[ 1406.522554] Kernel panic - not syncing: HYP panic:
[ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.522554] VCPU:0000000000000000
[ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT
[ 1406.523485] Hardware name: FVP Base RevC (DT)
[ 1406.523566] Call trace:
[ 1406.523629] show_stack+0x18/0x24 (C)
[ 1406.523753] dump_stack_lvl+0xd4/0x108
[ 1406.523899] dump_stack+0x18/0x24
[ 1406.524040] panic+0x3d8/0x448
[ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c
[ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c
[ 1406.524500] handle_exit+0x60/0x17c
[ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0
[ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc
[ 1406.524919] __arm64_sys_ioctl+0xac/0x104
[ 1406.525067] invoke_syscall+0x48/0x10c
[ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0
[ 1406.525322] do_el0_svc+0x1c/0x28
[ 1406.525441] el0_svc+0x38/0x120
[ 1406.525588] el0t_64_sync_handler+0x10c/0x138
[ 1406.525750] el0t_64_sync+0x1ac/0x1b0
[ 1406.525876] SMP: stopping secondary CPUs
[ 1406.525965] Kernel Offset: disabled
[ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f
[ 1406.526130] Memory Limit: none
[ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic:
[ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.959099] VCPU:0000000000000000 ] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: verify orphan file size is not too big
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Account for failed debug initialization
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters. |
| In the Linux kernel, the following vulnerability has been resolved:
pid: Add a judgment for ns null in pid_nr_ns
__task_pid_nr_ns
ns = task_active_pid_ns(current);
pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
if (pid && ns->level <= pid->level) {
Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.
For example:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : __task_pid_nr_ns+0x74/0xd0
lr : __task_pid_nr_ns+0x24/0xd0
sp : ffffffc08001bd10
x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
Call trace:
__task_pid_nr_ns+0x74/0xd0
...
__handle_irq_event_percpu+0xd4/0x284
handle_irq_event+0x48/0xb0
handle_fasteoi_irq+0x160/0x2d8
generic_handle_domain_irq+0x44/0x60
gic_handle_irq+0x4c/0x114
call_on_irq_stack+0x3c/0x74
do_interrupt_handler+0x4c/0x84
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
account_kernel_stack+0x60/0x144
exit_task_stack_account+0x1c/0x80
do_exit+0x7e4/0xaf8
...
get_signal+0x7bc/0x8d8
do_notify_resume+0x128/0x828
el0_svc+0x6c/0x70
el0t_64_sync_handler+0x68/0xbc
el0t_64_sync+0x1a8/0x1ac
Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't log conflicting inode if it's a dir moved in the current transaction
We can't log a conflicting inode if it's a directory and it was moved
from one parent directory to another parent directory in the current
transaction, as this can result an attempt to have a directory with
two hard links during log replay, one for the old parent directory and
another for the new parent directory.
The following scenario triggers that issue:
1) We have directories "dir1" and "dir2" created in a past transaction.
Directory "dir1" has inode A as its parent directory;
2) We move "dir1" to some other directory;
3) We create a file with the name "dir1" in directory inode A;
4) We fsync the new file. This results in logging the inode of the new file
and the inode for the directory "dir1" that was previously moved in the
current transaction. So the log tree has the INODE_REF item for the
new location of "dir1";
5) We move the new file to some other directory. This results in updating
the log tree to included the new INODE_REF for the new location of the
file and removes the INODE_REF for the old location. This happens
during the rename when we call btrfs_log_new_name();
6) We fsync the file, and that persists the log tree changes done in the
previous step (btrfs_log_new_name() only updates the log tree in
memory);
7) We have a power failure;
8) Next time the fs is mounted, log replay happens and when processing
the inode for directory "dir1" we find a new INODE_REF and add that
link, but we don't remove the old link of the inode since we have
not logged the old parent directory of the directory inode "dir1".
As a result after log replay finishes when we trigger writeback of the
subvolume tree's extent buffers, the tree check will detect that we have
a directory a hard link count of 2 and we get a mount failure.
The errors and stack traces reported in dmesg/syslog are like this:
[ 3845.729764] BTRFS info (device dm-0): start tree-log replay
[ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c
[ 3845.731236] memcg:ffff9264c02f4e00
[ 3845.731751] aops:btree_aops [btrfs] ino:1
[ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8
[ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00
[ 3845.735305] page dumped because: eb page dump
[ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir
[ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5
[ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701
[ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384
[ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0
[ 3845.737797] rdev 0 sequence 2 flags 0x0
[ 3845.737798] atime 1764259517.0
[ 3845.737800] ctime 1764259517.572889464
[ 3845.737801] mtime 1764259517.572889464
[ 3845.737802] otime 1764259517.0
[ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[ 3845.737805] index 0 name_len 2
[ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34
[ 3845.737808] location key (257 1 0) type 2
[ 3845.737810] transid 9 data_len 0 name_len 4
[ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34
[ 3845.737813] location key (258 1 0) type 2
[ 3845.737814] transid 9 data_len 0 name_len 4
[ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[ 3845.737816] location key (257 1 0) type 2
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid unregistering PSP twice
PSP is unregistered twice in:
_mlx5e_remove -> mlx5e_psp_unregister
mlx5e_nic_cleanup -> mlx5e_psp_unregister
This leads to a refcount underflow in some conditions:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 1694 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0
[...]
mlx5e_psp_unregister+0x26/0x50 [mlx5_core]
mlx5e_nic_cleanup+0x26/0x90 [mlx5_core]
mlx5e_remove+0xe6/0x1f0 [mlx5_core]
auxiliary_bus_remove+0x18/0x30
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2a0 [mlx5_core]
[...]
Do not directly remove psp from the _mlx5e_remove path, the PSP cleanup
happens as part of profile cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: only set free_cpus for online runqueues
Commit 16b269436b72 ("sched/deadline: Modify cpudl::free_cpus
to reflect rd->online") introduced the cpudl_set/clear_freecpu
functions to allow the cpu_dl::free_cpus mask to be manipulated
by the deadline scheduler class rq_on/offline callbacks so the
mask would also reflect this state.
Commit 9659e1eeee28 ("sched/deadline: Remove cpu_active_mask
from cpudl_find()") removed the check of the cpu_active_mask to
save some processing on the premise that the cpudl::free_cpus
mask already reflected the runqueue online state.
Unfortunately, there are cases where it is possible for the
cpudl_clear function to set the free_cpus bit for a CPU when the
deadline runqueue is offline. When this occurs while a CPU is
connected to the default root domain the flag may retain the bad
state after the CPU has been unplugged. Later, a different CPU
that is transitioning through the default root domain may push a
deadline task to the powered down CPU when cpudl_find sees its
free_cpus bit is set. If this happens the task will not have the
opportunity to run.
One example is outlined here:
https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.com
Another occurs when the last deadline task is migrated from a
CPU that has an offlined runqueue. The dequeue_task member of
the deadline scheduler class will eventually call cpudl_clear
and set the free_cpus bit for the CPU.
This commit modifies the cpudl_clear function to be aware of the
online state of the deadline runqueue so that the free_cpus mask
can be updated appropriately.
It is no longer necessary to manage the mask outside of the
cpudl_set/clear functions so the cpudl_set/clear_freecpu
functions are removed. In addition, since the free_cpus mask is
now only updated under the cpudl lock the code was changed to
use the non-atomic __cpumask functions. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-mixer: us16x08: validate meter packet indices
get_meter_levels_from_urb() parses the 64-byte meter packets sent by
the device and fills the per-channel arrays meter_level[],
comp_level[] and master_level[] in struct snd_us16x08_meter_store.
Currently the function derives the channel index directly from the
meter packet (MUB2(meter_urb, s) - 1) and uses it to index those
arrays without validating the range. If the packet contains a
negative or out-of-range channel number, the driver may write past
the end of these arrays.
Introduce a local channel variable and validate it before updating the
arrays. We reject negative indices, limit meter_level[] and
comp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[]
updates with ARRAY_SIZE(master_level). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a UAF problem in xattr repair
The xchk_setup_xattr_buf function can allocate a new value buffer, which
means that any reference to ab->value before the call could become a
dangling pointer. Fix this by moving an assignment to after the buffer
setup. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: skip lock-range check on equal size to avoid size==0 underflow
When size equals the current i_size (including 0), the code used to call
check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1`
and can underflow for size==0. Skip the equal case. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix bug in saving controller data
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: Fix irq assumption regression
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:
Unable to handle kernel NULL pointer dereference at virtual
address 00000001 when read
PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4
This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.
Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix double unregister of HCA_PORTS component
Clear hca_devcom_comp in device's private data after unregistering it in
LAG teardown. Otherwise a slightly lagging second pass through
mlx5_unload_one() might try to unregister it again and trip over
use-after-free.
On s390 almost all PCI level recovery events trigger two passes through
mxl5_unload_one() - one through the poll_health() method and one through
mlx5_pci_err_detected() as callback from generic PCI error recovery.
While testing PCI error recovery paths with more kernel debug features
enabled, this issue reproducibly led to kernel panics with the following
call chain:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 ESOP-2 FSI
Fault in home space mode while using kernel ASCE.
AS:00000000705c4007 R3:0000000000000024
Oops: 0038 ilc:3 [#1]SMP
CPU: 14 UID: 0 PID: 156 Comm: kmcheck Kdump: loaded Not tainted
6.18.0-20251130.rc7.git0.16131a59cab1.300.fc43.s390x+debug #1 PREEMPT
Krnl PSW : 0404e00180000000 0000020fc86aa1dc (__lock_acquire+0x5c/0x15f0)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000000 0000020f00000001 6b6b6b6b6b6b6c33 0000000000000000
0000000000000000 0000000000000000 0000000000000001 0000000000000000
0000000000000000 0000020fca28b820 0000000000000000 0000010a1ced8100
0000010a1ced8100 0000020fc9775068 0000018fce14f8b8 0000018fce14f7f8
Krnl Code: 0000020fc86aa1cc: e3b003400004 lg %r11,832
0000020fc86aa1d2: a7840211 brc 8,0000020fc86aa5f4
*0000020fc86aa1d6: c09000df0b25 larl %r9,0000020fca28b820
>0000020fc86aa1dc: d50790002000 clc 0(8,%r9),0(%r2)
0000020fc86aa1e2: a7840209 brc 8,0000020fc86aa5f4
0000020fc86aa1e6: c0e001100401 larl %r14,0000020fca8aa9e8
0000020fc86aa1ec: c01000e25a00 larl %r1,0000020fca2f55ec
0000020fc86aa1f2: a7eb00e8 aghi %r14,232
Call Trace:
__lock_acquire+0x5c/0x15f0
lock_acquire.part.0+0xf8/0x270
lock_acquire+0xb0/0x1b0
down_write+0x5a/0x250
mlx5_detach_device+0x42/0x110 [mlx5_core]
mlx5_unload_one_devl_locked+0x50/0xc0 [mlx5_core]
mlx5_unload_one+0x42/0x60 [mlx5_core]
mlx5_pci_err_detected+0x94/0x150 [mlx5_core]
zpci_event_attempt_error_recovery+0xcc/0x388 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
