Export limit exceeded: 421438 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40161 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix SGI cleanup on unbind The driver incorrectly determines SGI vs SPI interrupts by checking IRQ number < 16, which fails with dynamic IRQ allocation. During unbind, this causes improper SGI cleanup leading to kernel crash. Add explicit irq_type field to pdata for reliable identification of SGI interrupts (type-2) and only clean up SGI resources when appropriate. | ||||
| CVE-2025-40157 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller When loading the i10nm_edac driver on some Intel Granite Rapids servers, a call trace may appear as follows: UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16 shift exponent -66 is negative ... __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common] i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac] skx_register_mci+0x159/0x220 [skx_edac_common] i10nm_init+0xcb0/0x1ff0 [i10nm_edac] ... This occurs because some BIOS may disable a memory controller if there aren't any memory DIMMs populated on this memory controller. The DIMMMTR register of this disabled memory controller contains the invalid value ~0, resulting in the call trace above. Fix this call trace by skipping DIMM enumeration on a disabled memory controller. | ||||
| CVE-2025-68791 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: missing copy_finish in fuse-over-io-uring argument copies Fix a possible reference count leak of payload pages during fuse argument copies. [Joanne: simplified error cleanup] | ||||
| CVE-2025-40156 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe() The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check that the pointer is valid. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-40152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix bootup splat with separate_gpu_drm modparam The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses drm_gem_obj.gpuva.list, which is not initialized when the drm driver does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam is set: [ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0 [ 9.523160] Mem abort info: [ 9.523161] ESR = 0x0000000096000006 [ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits [ 9.523165] SET = 0, FnV = 0 [ 9.523166] EA = 0, S1PTW = 0 [ 9.523167] FSC = 0x06: level 2 translation fault [ 9.523169] Data abort info: [ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000 [ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000 [ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP [ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT [ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024 [ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 9.592973] pc : lookup_vma+0x28/0xe0 [msm] [ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm] [ 9.763632] sp : ffff800082dab460 [ 9.763666] Call trace: [ 9.763668] lookup_vma+0x28/0xe0 [msm] (P) [ 9.763688] get_vma_locked+0x2c/0x128 [msm] [ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm] [ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm] [ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm] [ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper] [ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper] [ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib] [ 9.763782] drm_client_register+0x58/0x9c [drm] [ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib] [ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib] [ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm] [ 9.763830] msm_drm_init+0x1a8/0x22c [msm] [ 9.763848] msm_drm_bind+0x30/0x3c [msm] [ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4 [ 9.919283] __component_add+0xa4/0x170 [ 9.919286] component_add+0x14/0x20 [ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm] [ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm] [ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus] [ 9.919341] really_probe+0xbc/0x298 [ 9.919345] __driver_probe_device+0x78/0x12c [ 9.919348] driver_probe_device+0x40/0x160 [ 9.919350] __driver_attach+0x94/0x19c [ 9.919353] bus_for_each_dev+0x74/0xd4 [ 9.919355] driver_attach+0x24/0x30 [ 9.919358] bus_add_driver+0xe4/0x208 [ 9.919360] driver_register+0x60/0x128 [ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus] [ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20] [ 9.919370] do_one_initcall+0x6c/0x1b0 [ 9.919374] do_init_module+0x58/0x234 [ 9.919377] load_module+0x19cc/0x1bd4 [ 9.919380] init_module_from_file+0x84/0xc4 [ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc [ 9.919384] invoke_syscall+0x48/0x110 [ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8 [ 9.919393] do_el0_svc+0x20/0x2c [ 9.919396] el0_svc+0x34/0xf0 [ 9.919401] el0t_64_sync_handler+0xa0/0xe4 [ 9.919403] el0t_64_sync+0x198/0x19c [ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44) [ 9.919410] ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/pa ---truncated--- | ||||
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||
| CVE-2025-40148 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute functions The function dc_stream_set_cursor_attributes() currently dereferences the `stream` pointer and nested members `stream->ctx->dc->current_state` without checking for NULL. All callers of these functions, such as in `dcn30_apply_idle_power_optimizations()` and `amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks before calling these functions. Fixes below: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes() error: we previously assumed 'stream' could be null (see line 334) drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 327 bool dc_stream_program_cursor_attributes( 328 struct dc_stream_state *stream, 329 const struct dc_cursor_attributes *attributes) 330 { 331 struct dc *dc; 332 bool reset_idle_optimizations = false; 333 334 dc = stream ? stream->ctx->dc : NULL; ^^^^^^ The old code assumed stream could be NULL. 335 --> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) { ^^^^^^ The refactor added an unchecked dereference. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 313 bool dc_stream_set_cursor_attributes( 314 struct dc_stream_state *stream, 315 const struct dc_cursor_attributes *attributes) 316 { 317 bool result = false; 318 319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here. This function used to check for if stream as NULL and return false at the start. Probably we should add that back. | ||||
| CVE-2025-40147 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: fix access race during throttle policy activation On repeated cold boots we occasionally hit a NULL pointer crash in blk_should_throtl() when throttling is consulted before the throttle policy is fully enabled for the queue. Checking only q->td != NULL is insufficient during early initialization, so blkg_to_pd() for the throttle policy can still return NULL and blkg_to_tg() becomes NULL, which later gets dereferenced. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000156 ... pc : submit_bio_noacct+0x14c/0x4c8 lr : submit_bio_noacct+0x48/0x4c8 sp : ffff800087f0b690 x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0 x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60 x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002 x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500 x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a Call trace: submit_bio_noacct+0x14c/0x4c8 verity_map+0x178/0x2c8 __map_bio+0x228/0x250 dm_submit_bio+0x1c4/0x678 __submit_bio+0x170/0x230 submit_bio_noacct_nocheck+0x16c/0x388 submit_bio_noacct+0x16c/0x4c8 submit_bio+0xb4/0x210 f2fs_submit_read_bio+0x4c/0xf0 f2fs_mpage_readpages+0x3b0/0x5f0 f2fs_readahead+0x90/0xe8 Tighten blk_throtl_activated() to also require that the throttle policy bit is set on the queue: return q->td != NULL && test_bit(blkcg_policy_throtl.plid, q->blkcg_pols); This prevents blk_should_throtl() from accessing throttle group state until policy data has been attached to blkgs. | ||||
| CVE-2025-40146 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix potential deadlock while nr_requests grown Allocate and free sched_tags while queue is freezed can deadlock[1], this is a long term problem, hence allocate memory before freezing queue and free memory after queue is unfreezed. [1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ | ||||
| CVE-2025-40143 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: dont report verifier bug for missing bpf_scc_visit on speculative path Syzbot generated a program that triggers a verifier_bug() call in maybe_exit_scc(). maybe_exit_scc() assumes that, when called for a state with insn_idx in some SCC, there should be an instance of struct bpf_scc_visit allocated for that SCC. Turns out the assumption does not hold for speculative execution paths. See example in the next patch. maybe_scc_exit() is called from update_branch_counts() for states that reach branch count of zero, meaning that path exploration for a particular path is finished. Path exploration can finish in one of three ways: a. Verification error is found. In this case, update_branch_counts() is called only for non-speculative paths. b. Top level BPF_EXIT is reached. Such instructions are never a part of an SCC, so compute_scc_callchain() in maybe_scc_exit() will return false, and maybe_scc_exit() will return early. c. A checkpoint is reached and matched. Checkpoints are created by is_state_visited(), which calls maybe_enter_scc(), which allocates bpf_scc_visit instances for checkpoints within SCCs. Hence, for non-speculative symbolic execution paths, the assumption still holds: if maybe_scc_exit() is called for a state within an SCC, bpf_scc_visit instance must exist. This patch removes the verifier_bug() call for speculative paths. | ||||
| CVE-2025-40142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts via spin_lock_irq(). This also implicitly disables the handling of softirqs such as TIMER_SOFTIRQ. On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not disable them. That means a timer can be invoked during spin_lock_irq() on the same CPU. Due to synchronisations reasons local_bh_disable() has a per-CPU lock named softirq_ctrl.lock which synchronizes individual softirq against each other. syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This is a possible deadlock. The softirq_ctrl.lock can not be made part of spin_lock_irq() as this would lead to too much synchronisation against individual threads on the system. To avoid the possible deadlock, softirqs must be manually disabled before the lock is acquired. Disable softirqs before the lock is acquired on PREEMPT_RT. | ||||
| CVE-2025-40145 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure When devm_add_action_or_reset() fails, it calls the passed cleanup function. Hence the caller must not repeat that cleanup. Replace the "goto err_regulator_free" by the actual freeing, as there will never be a need again for a second user of this label. | ||||
| CVE-2025-68796 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid updating zero-sized extent in extent cache As syzbot reported: F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0] ------------[ cut here ]------------ kernel BUG at fs/f2fs/extent_cache.c:678! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678 Call Trace: <TASK> f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085 f2fs_do_zero_range fs/f2fs/file.c:1657 [inline] f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737 f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030 vfs_fallocate+0x669/0x7e0 fs/open.c:342 ioctl_preallocate fs/ioctl.c:289 [inline] file_ioctl+0x611/0x780 fs/ioctl.c:-1 do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576 __do_sys_ioctl fs/ioctl.c:595 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f07bc58eec9 In error path of f2fs_zero_range(), it may add a zero-sized extent into extent cache, it should be avoided. | ||||
| CVE-2025-40138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid NULL pointer dereference in f2fs_check_quota_consistency() syzbot reported a f2fs bug as below: Oops: gen[ 107.736417][ T5848] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 5848 Comm: syz-executor263 Tainted: G W 6.17.0-rc1-syzkaller-00014-g0e39a731820a #0 PREEMPT_{RT,(full)} RIP: 0010:strcmp+0x3c/0xc0 lib/string.c:284 Call Trace: <TASK> f2fs_check_quota_consistency fs/f2fs/super.c:1188 [inline] f2fs_check_opt_consistency+0x1378/0x2c10 fs/f2fs/super.c:1436 __f2fs_remount fs/f2fs/super.c:2653 [inline] f2fs_reconfigure+0x482/0x1770 fs/f2fs/super.c:5297 reconfigure_super+0x224/0x890 fs/super.c:1077 do_remount fs/namespace.c:3314 [inline] path_mount+0xd18/0xfe0 fs/namespace.c:4112 do_mount fs/namespace.c:4133 [inline] __do_sys_mount fs/namespace.c:4344 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4321 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The direct reason is f2fs_check_quota_consistency() may suffer null-ptr-deref issue in strcmp(). The bug can be reproduced w/ below scripts: mkfs.f2fs -f /dev/vdb mount -t f2fs -o usrquota /dev/vdb /mnt/f2fs quotacheck -uc /mnt/f2fs/ umount /mnt/f2fs mount -t f2fs -o usrjquota=aquota.user,jqfmt=vfsold /dev/vdb /mnt/f2fs mount -t f2fs -o remount,usrjquota=,jqfmt=vfsold /dev/vdb /mnt/f2fs umount /mnt/f2fs So, before old_qname and new_qname comparison, we need to check whether they are all valid pointers, fix it. | ||||
| CVE-2025-68339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: atm/fore200e: Fix possible data race in fore200e_open() Protect access to fore200e->available_cell_rate with rate_mtx lock in the error handling path of fore200e_open() to prevent a data race. The field fore200e->available_cell_rate is a shared resource used to track available bandwidth. It is concurrently accessed by fore200e_open(), fore200e_close(), and fore200e_change_qos(). In fore200e_open(), the lock rate_mtx is correctly held when subtracting vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth. However, if the subsequent call to fore200e_activate_vcin() fails, the function restores the reserved bandwidth by adding back to available_cell_rate without holding the lock. This introduces a race condition because available_cell_rate is a global device resource shared across all VCCs. If the error path in fore200e_open() executes concurrently with operations like fore200e_close() or fore200e_change_qos() on other VCCs, a read-modify-write race occurs. Specifically, the error path reads the rate without the lock. If another CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in fore200e_close()) between this read and the subsequent write, the error path will overwrite the concurrent update with a stale value. This results in incorrect bandwidth accounting. | ||||
| CVE-2025-68797 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: char: applicom: fix NULL pointer dereference in ac_ioctl Discovered by Atuin - Automated Vulnerability Discovery Engine. In ac_ioctl, the validation of IndexCard and the check for a valid RamIO pointer are skipped when cmd is 6. However, the function unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the end. If cmd is 6, IndexCard may reference a board that does not exist (where RamIO is NULL), leading to a NULL pointer dereference. Fix this by skipping the readb access when cmd is 6, as this command is a global information query and does not target a specific board context. | ||||
| CVE-2025-68734 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe() In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when setup_instance() fails with an error code. Fix that by freeing the urb before freeing the hw structure. Also change the error paths to use the goto ladder style. Compile tested only. Issue found using a prototype static analysis tool. | ||||
| CVE-2025-40132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback In create_sdw_dailink() check that sof_end->codec_info->add_sidecar is not NULL before calling it. The original code assumed that if include_sidecar is true, the codec on that link has an add_sidecar callback. But there could be other codecs on the same link that do not have an add_sidecar callback. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||