| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
When we run syzkaller we get below Out of Bound.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
dump_backtrace+0x0/0x4c8
show_stack+0x34/0x44
dump_stack_lvl+0xd8/0x118
print_address_description+0x30/0x2d8
kasan_report+0x158/0x198
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf4/0x180
_regmap_read+0xc4/0x278
_regmap_update_bits+0x130/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_digital_mute+0xec/0x140
Actually There is no need to have decimator with 32 bits.
By limiting the variable with short type u8 issue is resolved. |
| In the Linux kernel, the following vulnerability has been resolved:
rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle()
The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread. However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:
runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M"
bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300"
[ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds.
[ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7
[ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000
[ 247.075346] Call Trace:
[ 247.075660] <TASK>
[ 247.075965] __schedule+0x635/0x1280
[ 247.076448] ? __pfx___schedule+0x10/0x10
[ 247.076967] ? schedule_timeout+0x2dc/0x4d0
[ 247.077471] ? __pfx_lock_release+0x10/0x10
[ 247.078018] ? enqueue_timer+0xe2/0x220
[ 247.078522] schedule+0x84/0x120
[ 247.078957] schedule_timeout+0x2e1/0x4d0
[ 247.079447] ? __pfx_schedule_timeout+0x10/0x10
[ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.080591] ? __pfx_process_timeout+0x10/0x10
[ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10
[ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.082287] rcu_scale_writer+0x6b1/0x7f0
[ 247.082773] ? mark_held_locks+0x29/0xa0
[ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.084412] kthread+0x179/0x1c0
[ 247.084759] ? __pfx_kthread+0x10/0x10
[ 247.085098] ret_from_fork+0x2c/0x50
[ 247.085433] </TASK>
This commit therefore replaces schedule_timeout_uninterruptible() with
schedule_timeout_idle(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add check for kmemdup
Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
My previous commit introduced a memory leak where the item allocated
from tlmi_setting was not freed.
This commit also renames it to avoid confusion with the similarly name
variable in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set page extent mapped after read_folio in relocate_one_page
One of the CI runs triggered the following panic
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
sp : ffff800093213720
x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000
x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff
x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880
x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff
x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028
x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000
x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c
x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8
x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_set_dirty+0x38/0xa0
btrfs_page_set_dirty+0x58/0x88
relocate_one_page+0x204/0x5f0
relocate_file_extent_cluster+0x11c/0x180
relocate_data_extent+0xd0/0xf8
relocate_block_group+0x3d0/0x4e8
btrfs_relocate_block_group+0x2d8/0x490
btrfs_relocate_chunk+0x54/0x1a8
btrfs_balance+0x7f4/0x1150
btrfs_ioctl+0x10f0/0x20b8
__arm64_sys_ioctl+0x120/0x11d8
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x158
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198
Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000)
This is the same problem outlined in 17b17fcd6d44 ("btrfs:
set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the
fix is the same. I originally looked for the same pattern elsewhere in
our code, but mistakenly skipped over this code because I saw the page
cache readahead before we set_page_extent_mapped, not realizing that
this was only in the !page case, that we can still end up with a
!uptodate page and then do the btrfs_read_folio further down.
The fix here is the same as the above mentioned patch, move the
set_page_extent_mapped call to after the btrfs_read_folio() block to
make sure that we have the subpage blocksize stuff setup properly before
using the page. |
| In the Linux kernel, the following vulnerability has been resolved:
sh: dma: Fix DMA channel offset calculation
Various SoCs of the SH3, SH4 and SH4A family, which use this driver,
feature a differing number of DMA channels, which can be distributed
between up to two DMAC modules. The existing implementation fails to
correctly accommodate for all those variations, resulting in wrong
channel offset calculations and leading to kernel panics.
Rewrite dma_base_addr() in order to properly calculate channel offsets
in a DMAC module. Fix dmaor_read_reg() and dmaor_write_reg(), so that
the correct DMAC module base is selected for the DMAOR register. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
This reverts commit
443a98e649b4 ("soundwire: bus: use pm_runtime_resume_and_get()")
Change calls to pm_runtime_resume_and_get() back to pm_runtime_get_sync().
This fixes a usage count underrun caused by doing a pm_runtime_put() even
though pm_runtime_resume_and_get() returned an error.
The three affected functions ignore -EACCES error from trying to get
pm_runtime, and carry on, including a put at the end of the function.
But pm_runtime_resume_and_get() does not increment the usage count if it
returns an error. So in the -EACCES case you must not call
pm_runtime_put().
The documentation for pm_runtime_get_sync() says:
"Consider using pm_runtime_resume_and_get() ... as this is likely to
result in cleaner code."
In this case I don't think it results in cleaner code because the
pm_runtime_put() at the end of the function would have to be conditional on
the return value from pm_runtime_resume_and_get() at the top of the
function.
pm_runtime_get_sync() doesn't have this problem because it always
increments the count, so always needs a put. The code can just flow through
and do the pm_runtime_put() unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix lost destroy smbd connection when MR allocate failed
If the MR allocate failed, the smb direct connection info is NULL,
then smbd_destroy() will directly return, then the connection info
will be leaked.
Let's set the smb direct connection info to the server before call
smbd_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add missing gfx11 MQD manager callbacks
mqd_stride function was introduced in commit 2f77b9a242a2
("drm/amdkfd: Update MQD management on multi XCC setup")
but not assigned for gfx11. Fixes a NULL dereference in debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: refuse to create ea block when umounted
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/sysv: Null check to prevent null-ptr-deref bug
sb_getblk(inode->i_sb, parent) return a null ptr and taking lock on
that leads to the null-ptr-deref bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
Syzbot reported a bug as following:
=====================================================
BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
__ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
ip6_finish_skb include/net/ipv6.h:1122 [inline]
ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987
rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579
rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922
inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
__sys_sendmsg net/socket.c:2559 [inline]
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook mm/slab.h:766 [inline]
slab_alloc_node mm/slub.c:3452 [inline]
__kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
kmalloc_reserve net/core/skbuff.c:492 [inline]
__alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
alloc_skb include/linux/skbuff.h:1270 [inline]
__ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684
ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854
rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915
inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
__sys_sendmsg net/socket.c:2559 [inline]
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
It is because icmp6hdr does not in skb linear region under the scenario
of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will
trigger the uninit variable access bug.
Use a local variable icmp6_type to carry the correct value in different
scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()
'read' is freed when it is known to be NULL, but not when a read error
occurs.
Revert the logic to avoid a small leak, should a m920x_read() call fail. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix a possible null-pointer dereference in ni_clear()
In a previous commit c1006bd13146, ni->mi.mrec in ni_write_inode()
could be NULL, and thus a NULL check is added for this variable.
However, in the same call stack, ni->mi.mrec can be also dereferenced
in ni_clear():
ntfs_evict_inode(inode)
ni_write_inode(inode, ...)
ni = ntfs_i(inode);
is_rec_inuse(ni->mi.mrec) -> Add a NULL check by previous commit
ni_clear(ntfs_i(inode))
is_rec_inuse(ni->mi.mrec) -> No check
Thus, a possible null-pointer dereference may exist in ni_clear().
To fix it, a NULL check is added in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h] |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't wake up kswapd from fill_pool()
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.
Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.
Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: usb: siano: Fix use after free bugs caused by do_submit_urb
There are UAF bugs caused by do_submit_urb(). One of the KASan reports
is shown below:
[ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890
[ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49
[ 36.408316]
[ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8
[ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.416157] Workqueue: 0x0 (events)
[ 36.417654] Call Trace:
[ 36.418546] <TASK>
[ 36.419320] dump_stack_lvl+0x96/0xd0
[ 36.420522] print_address_description+0x75/0x350
[ 36.421992] print_report+0x11b/0x250
[ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0
[ 36.424806] ? __virt_addr_valid+0xcf/0x170
[ 36.426069] ? worker_thread+0x4a2/0x890
[ 36.427355] kasan_report+0x131/0x160
[ 36.428556] ? worker_thread+0x4a2/0x890
[ 36.430053] worker_thread+0x4a2/0x890
[ 36.431297] ? worker_clr_flags+0x90/0x90
[ 36.432479] kthread+0x166/0x190
[ 36.433493] ? kthread_blkcg+0x50/0x50
[ 36.434669] ret_from_fork+0x22/0x30
[ 36.435923] </TASK>
[ 36.436684]
[ 36.437215] Allocated by task 24:
[ 36.438289] kasan_set_track+0x50/0x80
[ 36.439436] __kasan_kmalloc+0x89/0xa0
[ 36.440566] smsusb_probe+0x374/0xc90
[ 36.441920] usb_probe_interface+0x2d1/0x4c0
[ 36.443253] really_probe+0x1d5/0x580
[ 36.444539] __driver_probe_device+0xe3/0x130
[ 36.446085] driver_probe_device+0x49/0x220
[ 36.447423] __device_attach_driver+0x19e/0x1b0
[ 36.448931] bus_for_each_drv+0xcb/0x110
[ 36.450217] __device_attach+0x132/0x1f0
[ 36.451470] bus_probe_device+0x59/0xf0
[ 36.452563] device_add+0x4ec/0x7b0
[ 36.453830] usb_set_configuration+0xc63/0xe10
[ 36.455230] usb_generic_driver_probe+0x3b/0x80
[ 36.456166] printk: console [ttyGS0] disabled
[ 36.456569] usb_probe_device+0x90/0x110
[ 36.459523] really_probe+0x1d5/0x580
[ 36.461027] __driver_probe_device+0xe3/0x130
[ 36.462465] driver_probe_device+0x49/0x220
[ 36.463847] __device_attach_driver+0x19e/0x1b0
[ 36.465229] bus_for_each_drv+0xcb/0x110
[ 36.466466] __device_attach+0x132/0x1f0
[ 36.467799] bus_probe_device+0x59/0xf0
[ 36.469010] device_add+0x4ec/0x7b0
[ 36.470125] usb_new_device+0x863/0xa00
[ 36.471374] hub_event+0x18c7/0x2220
[ 36.472746] process_one_work+0x34c/0x5b0
[ 36.474041] worker_thread+0x4b7/0x890
[ 36.475216] kthread+0x166/0x190
[ 36.476267] ret_from_fork+0x22/0x30
[ 36.477447]
[ 36.478160] Freed by task 24:
[ 36.479239] kasan_set_track+0x50/0x80
[ 36.480512] kasan_save_free_info+0x2b/0x40
[ 36.481808] ____kasan_slab_free+0x122/0x1a0
[ 36.483173] __kmem_cache_free+0xc4/0x200
[ 36.484563] smsusb_term_device+0xcd/0xf0
[ 36.485896] smsusb_probe+0xc85/0xc90
[ 36.486976] usb_probe_interface+0x2d1/0x4c0
[ 36.488303] really_probe+0x1d5/0x580
[ 36.489498] __driver_probe_device+0xe3/0x130
[ 36.491140] driver_probe_device+0x49/0x220
[ 36.492475] __device_attach_driver+0x19e/0x1b0
[ 36.493988] bus_for_each_drv+0xcb/0x110
[ 36.495171] __device_attach+0x132/0x1f0
[ 36.496617] bus_probe_device+0x59/0xf0
[ 36.497875] device_add+0x4ec/0x7b0
[ 36.498972] usb_set_configuration+0xc63/0xe10
[ 36.500264] usb_generic_driver_probe+0x3b/0x80
[ 36.501740] usb_probe_device+0x90/0x110
[ 36.503084] really_probe+0x1d5/0x580
[ 36.504241] __driver_probe_device+0xe3/0x130
[ 36.505548] driver_probe_device+0x49/0x220
[ 36.506766] __device_attach_driver+0x19e/0x1b0
[ 36.508368] bus_for_each_drv+0xcb/0x110
[ 36.509646] __device_attach+0x132/0x1f0
[ 36.510911] bus_probe_device+0x59/0xf0
[ 36.512103] device_add+0x4ec/0x7b0
[ 36.513215] usb_new_device+0x863/0xa00
[ 36.514736] hub_event+0x18c7/0x2220
[ 36.516130] process_one_work+
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Add a check for valid 'mad_agent' pointer
When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.
In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.
This issue can hit when RoCE driver unregisters ib_device
Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
? __schedule+0x20b/0x560
srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
srpt_remove_one+0x20/0x150 [ib_srpt]
remove_client_context+0x88/0xd0 [ib_core]
bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
disable_device+0x8a/0x160 [ib_core]
bond0: active interface up!
? kernfs_name_hash+0x12/0x80
(NULL device *): Bonding Info Received: rdev: 000000006c0b8247
__ib_unregister_device+0x42/0xb0 [ib_core]
(NULL device *): Master: mode: 4 num_slaves:2
ib_unregister_device+0x22/0x30 [ib_core]
(NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0
bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] |
