Export limit exceeded: 413887 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (615 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89903 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and RESTORE_SOME() restores it only when returning to user mode; the context-switch path never writes it. Therefore the live $r21 at trampoline exit is already correct, and nothing inbetween can change it legitimately (kernel C code cannot write a global register variable). The same flaw existed even in the pre-rethook kretprobe trampoline since v6.3; it was carried over when rethook replaced it. Drop both the save and the restore here. Drop the restore is enough to solve the issue, and drop the save is to keep the code tidy and no need to clear it. | ||||
| CVE-2026-89914 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Sign-extend VA for range-based TLBI invalidation When the decode_range_tlbi() helper was moved to be used for S1 TLBIs, the required sign extension was omitted. Add it. As a result, special care must be taken to not overflow PA bits when this is used for S2 invalidation. | ||||
| CVE-2026-78940 | 1 Google | 1 Chrome | 2026-09-17 | 4.3 Medium |
| Improper initialization in Network in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-80859 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix missing barrier when checking io-uring readiness fuse_block_alloc() reads fch->initialized and then fch->io_uring. fch->io_uring is set before fch->initialized, ordered by the smp_wmb() in fuse_chan_set_intialized(), but fuse_block_alloc() has no matching read barrier between the two loads. This may lead a CPU to observe fch->initialized=1 but fch->io_uring=0, and skip the check that blocks request allocation until the io-uring queues are ready. This can reintroduce the lock-order inversion deadlock that commit 3393ff964e0f prevents. Add an smp_rmb() barrier to pair with the smp_wmb() in fuse_chan_set_initialized() to prevent this. | ||||
| CVE-2026-87616 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-09-09 | 8.3 High |
| Improper initialization in Views in Google Chrome on on Windows prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-47843 | 2 Broadcom, Spring | 2 Reactor Netty, Reactor Netty | 2026-09-05 | 3.7 Low |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver. Reactor Netty 1.3.0 - 1.3.6 Reactor Netty 1.1.0 - 1.2.18 Reactor Netty 1.0.52 and earlier | ||||
| CVE-2026-80769 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: rapoo: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the alternative would be to provide a simple stub implementation on !USB_HID builds. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue. | ||||
| CVE-2026-80809 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernel when setting a large xattr value on a fragmented filesystem where the file already has an external xattr block. [CAUSE] ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new xattr value's extent tree when the file already has an external xattr block. The not_found path leaves meta_add at zero, so meta_ac is NULL when ocfs2_xattr_extend_allocation() runs. A new value root has room for a single extent record. On a fragmented filesystem, the allocator cannot satisfy the xattr value in one contiguous run, so each non-contiguous run requires its own extent record. When the value root's extent list is full and meta_ac is NULL, ocfs2_add_clusters_in_btree() returns RESTART_META, and ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META). [FIX] The case where no xattr block exists yet already calls ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree metadata. Add the same reservation to the case where an xattr block already exists, making the two cases consistent. Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is returned despite the reservation, the error propagates to userspace instead of panicking the kernel. | ||||
| CVE-2026-80808 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A corrupted filesystem can violate that invariant. The syzbot reproducer reports allocator and xattr corruption before triggering this retry loop. Check the untrusted on-disk count before incrementing it, avoiding overflow, and clear MBE_REUSABLE_B when it is already saturated. The next lookup then skips the entry that was just proven unusable. This mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release path marks the entry reusable again on the exact 1024-to-1023 transition. Using the same QEMU harness and guest parameters, current unpatched Linux hung in 6 of 8 420-second trials with the do_rmdir signature; representative NMI backtraces caught the owner spinning in ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials without a hung-task report; the final twelve trials exercised the reviewed overflow-safe form of the change. syzbot's patch testing also completed without reproducing the hang. | ||||
| CVE-2026-80881 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix buffer head management in ocfs2_read_blocks() In ocfs2_read_blocks(), caller should't assume that buffer head returned by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops b_count from 1 to 0. If it is not so, buffer head remains on hold and likely to be returned by the next call to 'sb_getblk()' unchanged - that is, with BH_Uptodate bit set even if it has failed validation previously, thus allowing to insert that buffer head into OCFS2 metadata cache and submit it to upper layers. To avoid such a scenario, BH_Uptodate should be cleared immediately after 'validate()' callback has detected some data inconsistency. | ||||
| CVE-2026-80883 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: gr2d/gr3d: Initialize address register map before HOST1X client is registered The host1x_client_register() function is called just prior to register map initialization loop, making the device available to userspace. This may result in userspace attempting to submits a job before the register map is initialized. Address this by moving register initialization before host1x client registration. | ||||
| CVE-2026-80868 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: Allocate iomap inline_data using alloc_page This fixes a BUG reported in iomap_write_end_inline: iomap_inline_data_valid checks that the inline_data fits within a page. If the inline_data is allocated with kmemdup there's no guarantee that it's page-aligned, so the check sometimes fails. Allocate it with alloc_page to ensure it's page-aligned. | ||||
| CVE-2026-80895 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Order pt_vp_array publish against irqfd assertion path mshv_partition_ioctl_create_vp() initialises a VP struct (allocations, mutex_init, init_waitqueue_head, page mappings) and then publishes the pointer into partition->pt_vp_array. Several ISR paths read this array locklessly: the intercept ISR, the two scheduler ISRs, and mshv_try_assert_irq_fast() on the irqfd fast path. Of these, only mshv_try_assert_irq_fast() can structurally race the publish. It runs from an eventfd waker without holding pt_mutex, and MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to refer to an existing VP at registration time. A user can therefore register an irqfd targeting a yet-to-be-created VP, then trigger mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the same index. On weakly-ordered architectures the reader can observe a non-NULL pointer in pt_vp_array before the initialising stores to the VP struct become visible, leading to use of partially-initialised fields (e.g. vp_register_page). The other ISR readers cannot reach this race: the hypervisor will not generate intercept or scheduler messages for a VP that has never been told to run, and the user can only call MSHV_RUN_VP on the VP fd returned by MSHV_CREATE_VP, which by construction is returned after the publish. Leave those readers as plain loads. Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish the pointer, and pair it with smp_load_acquire() in mshv_try_assert_irq_fast(). On x86 these compile to plain accesses under TSO; on ARM64 they emit one-instruction acquire/release barriers, acceptable on this fast path. The destroy-side path (destroy_partition() clearing pt_vp_array[i] to NULL after kfree(vp)) has a separate ordering and lifetime concern that is out of scope here. | ||||
| CVE-2026-80899 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: remove fscache backend entirely EROFS over fscache was introduced to provide image lazy pulling functionality. After the feature landed, the fscache subsystem made netfs a new hard dependency, which is unexpected for a local filesystem and has an kernel-defined caching hierarchy which could be inflexible compared to the fanotify pre-content hooks. Therefore, this feature has been deprecated for almost two years. As EROFS file-backed mounts and fanotify pre-content hooks both upstream for a while and already providing equivalent functionality (erofs-utils has supported fanotify pre-content hooks), let's remove the fscache backend now. The main application of this feature is Nydus [1], and they plan to move to use fanotify pre-content hooks in the near future too. I hope this patch can be merged into Linux 7.2, which is also motivated by newly found implementation issues [2][3] that are not worth investigating given the deprecation and limited development resources. The associated fscache/cachefiles cleanup patch will follow separately through the vfs tree (netfs) later: it seems fine since the codebase is isolated by CONFIG_CACHEFILES_ONDEMAND. [1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md [2] https://github.com/dragonflyoss/nydus/pull/1824 [3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com | ||||
| CVE-2026-80831 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - fix source scatterlist length access mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid and could return zero or a stale DMA length, causing encryption and decryption to process the wrong number of bytes when CONFIG_NEED_SG_DMA_LENGTH=y. Use the original scatterlist length instead. | ||||
| CVE-2026-80806 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable DAX on new encrypted files Currently, when a new encrypted regular file is created, the call to ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the filesystem is mounted with "-o dax=always". EXT4_INODE_ENCRYPT then actually gets set a bit later in __ext4_new_inode(), when it calls fscrypt_set_context() which calls ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too. This was intended to clear S_DAX as well. However, this was broken by commit 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load"). This causes data written to the file to bypass encryption, also causing xfstests failures such as generic/548 (when "-o dax=always" is used). Fix this by simplifying the flow by making __ext4_new_inode() set EXT4_INODE_ENCRYPT earlier. This makes it take effect in ext4_set_inode_flags(inode, init=true), making S_DAX never be set. Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first place on new encrypted inodes. Then it doesn't need to be cleared. As a result of these simplifications, ext4_set_context() no longer needs to change inode flags or state when 'handle != NULL'. Remove that too. | ||||
| CVE-2026-80815 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Use a private URB for the notification endpoint scarlett2_init_notify() used mixer->urb, which snd_usb_mixer_status_create() allocates for the UAC2 status interrupt endpoint and mixer.c manages. On a device with that endpoint, the "already in use" check fires on the status URB and returns 0 for success without doing anything. No notification URB is submitted, and cmd_done is left zeroed because it is initialised past that check and nowhere else. scarlett2_usb_init() then issues SCARLETT2_USB_INIT_1 and wait_for_completion_timeout() would crash adding to the zeroed wait.head. Use a separate URB in scarlett2_data, as done for FCP, and initialise cmd_done in scarlett2_init_private(). mixer.c was also freeing the URB in snd_usb_mixer_free() and resubmitting it in snd_usb_mixer_activate(), so scarlett2 must now do both: add scarlett2_cleanup_urb(), called from private_free and private_suspend, and a private_resume callback to re-establish the URB after resume. scarlett2_init_notify() is reached from there, and the URB kill path in scarlett2_notify() completes cmd_done, leaving a stale count that would satisfy the next command's wait before the device ACKs. Use reinit_completion() to clear it. Also free the URB if the transfer buffer allocation fails, and both if usb_submit_urb() fails. Move scarlett2_init_notify() up next to scarlett2_cleanup_urb() so scarlett2_init_private() can reference it without a forward declaration. | ||||
| CVE-2026-80626 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable. | ||||
| CVE-2026-80532 | 1 Linux | 1 Linux Kernel | 2026-08-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix another iunlink infinite loop bug in online fsck xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the incore prev and next unlinked list pointers based on what it finds on disk and in memory before we move on to relinking the truly lost inodes back into the unlinked list. However, it's still vulnerable to infinite loops that come in via the next_unlinked pointers. Fix this problem by remembering which inodes we've already seen and checking new agino pointers against that. If a bit is already set, either this is a loop or the inode has nonzero link count. We'll deal with the second case in a subsequent patch. | ||||
| CVE-2026-68449 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning The hand-rolled bit-scanning loop in the NCQ completion path has an infinite loop bug. When tag_mask has only high bits set (e.g. 0x80000000), the inner while loop left-shifts tag_mask until it overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1 stays 0, causing an infinite loop in hardirq context with a spinlock held. Replace the open-coded bit-scanning with __ffs() which correctly finds the least significant set bit and is bounded by the width of the argument. | ||||