| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: don't leak memory if dev_set_name() fails
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf()
and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy
of the CPU and mark it as busy.
In these functions, cpufreq_cpu_put() should be used to release the
policy, but it is not, so any other entity trying to access the policy
is blocked indefinitely.
One such scenario is when amd_pstate mode is changed, leading to the
following splat:
[ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds.
[ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5
[ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006
[ 1332.123143] Call Trace:
[ 1332.123145] <TASK>
[ 1332.123148] __schedule+0x3c1/0x16a0
[ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70
[ 1332.123157] schedule+0x6f/0x110
[ 1332.123160] schedule_timeout+0x14f/0x160
[ 1332.123162] ? preempt_count_add+0x86/0xd0
[ 1332.123165] __wait_for_common+0x92/0x190
[ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10
[ 1332.123170] wait_for_completion+0x28/0x30
[ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90
[ 1332.123177] cpufreq_policy_free+0x157/0x1d0
[ 1332.123178] ? preempt_count_add+0x58/0xd0
[ 1332.123180] cpufreq_remove_dev+0xb6/0x100
[ 1332.123182] subsys_interface_unregister+0x114/0x120
[ 1332.123185] ? preempt_count_add+0x58/0xd0
[ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10
[ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0
[ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50
[ 1332.123194] store_status+0xe9/0x180
[ 1332.123197] dev_attr_store+0x1b/0x30
[ 1332.123199] sysfs_kf_write+0x42/0x50
[ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0
[ 1332.123204] vfs_write+0x2df/0x400
[ 1332.123208] ksys_write+0x6b/0xf0
[ 1332.123210] __x64_sys_write+0x1d/0x30
[ 1332.123213] do_syscall_64+0x60/0x90
[ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50
[ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0
[ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20
[ 1332.123225] ? irqentry_exit+0x3f/0x50
[ 1332.123226] ? exc_page_fault+0x8e/0x190
[ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1332.123232] RIP: 0033:0x7fa74c514a37
[ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37
[ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001
[ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff
[ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008
[ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00
[ 1332.123247] </TASK>
Fix this by calling cpufreq_cpu_put() wherever necessary.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix defrag path triggering jbd2 ASSERT
code path:
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
__ocfs2_move_extent
+ ocfs2_journal_access_di
+ ocfs2_split_extent //sub-paths call jbd2_journal_restart
+ ocfs2_journal_dirty //crash by jbs2 ASSERT
crash stacks:
PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2"
#0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
#1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
#2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
#3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
#4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
#5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
#6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
[exception RIP: jbd2_journal_dirty_metadata+0x2ba]
RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250
RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000
R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28
R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
#8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
#9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]
Analysis
This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.
How to fix
For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair. The fix method is to remove
journal access/dirty from __ocfs2_move_extent().
The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix vram leak on bind errors
Make sure to release the VRAM buffer also in a case a subcomponent fails
to bind.
Patchwork: https://patchwork.freedesktop.org/patch/525094/ |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Add histograms to hist_vars if they have referenced variables
Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so
$ cd /sys/kernel/tracing
$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events
$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger
$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
[ 100.263533] ==================================================================
[ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180
[ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439
[ 100.266320]
[ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4
[ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 100.268561] Call Trace:
[ 100.268902] <TASK>
[ 100.269189] dump_stack_lvl+0x4c/0x70
[ 100.269680] print_report+0xc5/0x600
[ 100.270165] ? resolve_var_refs+0xc7/0x180
[ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0
[ 100.271389] ? resolve_var_refs+0xc7/0x180
[ 100.271913] kasan_report+0xbd/0x100
[ 100.272380] ? resolve_var_refs+0xc7/0x180
[ 100.272920] __asan_load8+0x71/0xa0
[ 100.273377] resolve_var_refs+0xc7/0x180
[ 100.273888] event_hist_trigger+0x749/0x860
[ 100.274505] ? kasan_save_stack+0x2a/0x50
[ 100.275024] ? kasan_set_track+0x29/0x40
[ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10
[ 100.276138] ? ksys_write+0xd1/0x170
[ 100.276607] ? do_syscall_64+0x3c/0x90
[ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 100.277771] ? destroy_hist_data+0x446/0x470
[ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860
[ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10
[ 100.279627] ? __kasan_check_write+0x18/0x20
[ 100.280177] ? mutex_unlock+0x85/0xd0
[ 100.280660] ? __pfx_mutex_unlock+0x10/0x10
[ 100.281200] ? kfree+0x7b/0x120
[ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0
[ 100.282197] ? event_trigger_write+0xac/0x100
[ 100.282764] ? __kasan_slab_free+0x16/0x20
[ 100.283293] ? __kmem_cache_free+0x153/0x2f0
[ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250
[ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10
[ 100.285221] ? event_trigger_write+0xbc/0x100
[ 100.285781] ? __kasan_check_read+0x15/0x20
[ 100.286321] ? __bitmap_weight+0x66/0xa0
[ 100.286833] ? _find_next_bit+0x46/0xe0
[ 100.287334] ? task_mm_cid_work+0x37f/0x450
[ 100.287872] event_triggers_call+0x84/0x150
[ 100.288408] trace_event_buffer_commit+0x339/0x430
[ 100.289073] ? ring_buffer_event_data+0x3f/0x60
[ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0
[ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0
[ 100.298653] syscall_enter_from_user_mode+0x32/0x40
[ 100.301808] do_syscall_64+0x1a/0x90
[ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 100.307775] RIP: 0033:0x7f686c75c1cb
[ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48
[ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021
[ 100.321200] RA
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_serial: Add null pointer check in gserial_resume
Consider a case where gserial_disconnect has already cleared
gser->ioport. And if a wakeup interrupt triggers afterwards,
gserial_resume gets called, which will lead to accessing of
gser->ioport and thus causing null pointer dereference.Add
a null pointer check to prevent this.
Added a static spinlock to prevent gser->ioport from becoming
null after the newly added check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix sdma v4 sw fini error
Fix sdma v4 sw fini error for sdma 4.2.2 to
solve the following general protection fault
[ +0.108196] general protection fault, probably for non-canonical
address 0xd5e5a4ae79d24a32: 0000 [#1] PREEMPT SMP PTI
[ +0.000018] RIP: 0010:free_fw_priv+0xd/0x70
[ +0.000022] Call Trace:
[ +0.000012] <TASK>
[ +0.000011] release_firmware+0x55/0x80
[ +0.000021] amdgpu_ucode_release+0x11/0x20 [amdgpu]
[ +0.000415] amdgpu_sdma_destroy_inst_ctx+0x4f/0x90 [amdgpu]
[ +0.000360] sdma_v4_0_sw_fini+0xce/0x110 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: davinci: Fix clk use after free
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it. |
| Incorrect security UI in LookalikeChecks in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in PDF in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in WebView in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect security UI in Downloads in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix refcount leak in smb2_open()
When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file
must be released. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode
When operating in HS200 or HS400 timing modes, reducing the clock frequency
below 52MHz will lead to link broken as the Rockchip DWC MSHC controller
requires maintaining a minimum clock of 52MHz in these modes.
Add a check to prevent illegal clock reduction through debugfs:
root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock
root@debian:/# [ 30.090146] mmc0: running CQE recovery
mmc0: cqhci: Failed to halt
mmc0: cqhci: spurious TCN for tag 0
WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24
Modules linked in:
CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT
Hardware name: Rockchip RK3588 EVB1 V10 Board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cqhci_irq+0x254/0x818
lr : cqhci_irq+0x254/0x818
... |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in gfs2_glock_shrink_scan
The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to
remove the glock from the lru list in __gfs2_glock_put().
On the shrink scan path, the same flag is cleared under lru_lock but because
of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the
put side can be made without deleting the glock from the lru list.
Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to
ensure correct behavior on both sides - clear GLF_LRU after list_del under
lru_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b.
The revert is required due to the suspicion it is not good for anything
and cause crash. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: always restore the old font data in fbcon_do_set_font()
Commit a5a923038d70 (fbdev: fbcon: Properly revert changes when
vc_resize() failed) started restoring old font data upon failure (of
vc_resize()). But it performs so only for user fonts. It means that the
"system"/internal fonts are not restored at all. So in result, the very
first call to fbcon_do_set_font() performs no restore at all upon
failing vc_resize().
This can be reproduced by Syzkaller to crash the system on the next
invocation of font_get(). It's rather hard to hit the allocation failure
in vc_resize() on the first font_set(), but not impossible. Esp. if
fault injection is used to aid the execution/failure. It was
demonstrated by Sirius:
BUG: unable to handle page fault for address: fffffffffffffff8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286
Call Trace:
<TASK>
con_font_get drivers/tty/vt/vt.c:4558 [inline]
con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673
vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline]
vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752
tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803
vfs_ioctl fs/ioctl.c:51 [inline]
...
So restore the font data in any case, not only for user fonts. Note the
later 'if' is now protected by 'old_userfont' and not 'old_data' as the
latter is always set now. (And it is supposed to be non-NULL. Otherwise
we would see the bug above again.) |
