| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.
Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.
Trimmed-down lockdep splat:
The existing dependency chain (in reverse order) is:
-> #2 (free_entries_lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
dma_entry_alloc+0x38/0x110
debug_dma_map_page+0x60/0xf8
dma_map_page_attrs+0x1e0/0x230
dma_map_single_attrs.constprop.0+0x6c/0xc8
geni_se_rx_dma_prep+0x40/0xcc
qcom_geni_serial_isr+0x310/0x510
__handle_irq_event_percpu+0x110/0x244
handle_irq_event_percpu+0x20/0x54
handle_irq_event+0x50/0x88
handle_fasteoi_irq+0xa4/0xcc
handle_irq_desc+0x28/0x40
generic_handle_domain_irq+0x24/0x30
gic_handle_irq+0xc4/0x148
do_interrupt_handler+0xa4/0xb0
el1_interrupt+0x34/0x64
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
arch_local_irq_enable+0x4/0x8
____do_softirq+0x18/0x24
...
-> #1 (&port_lock_key){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
qcom_geni_serial_console_write+0x184/0x1dc
console_flush_all+0x344/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
register_console+0x230/0x38c
uart_add_one_port+0x338/0x494
qcom_geni_serial_probe+0x390/0x424
platform_probe+0x70/0xc0
really_probe+0x148/0x280
__driver_probe_device+0xfc/0x114
driver_probe_device+0x44/0x100
__device_attach_driver+0x64/0xdc
bus_for_each_drv+0xb0/0xd8
__device_attach+0xe4/0x140
device_initial_probe+0x1c/0x28
bus_probe_device+0x44/0xb0
device_add+0x538/0x668
of_device_add+0x44/0x50
of_platform_device_create_pdata+0x94/0xc8
of_platform_bus_create+0x270/0x304
of_platform_populate+0xac/0xc4
devm_of_platform_populate+0x60/0xac
geni_se_probe+0x154/0x160
platform_probe+0x70/0xc0
...
-> #0 (console_owner){-...}-{0:0}:
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
dma_entry_alloc+0xb4/0x110
debug_dma_map_sg+0xdc/0x2f8
__dma_map_sg_attrs+0xac/0xe4
dma_map_sgtable+0x30/0x4c
get_pages+0x1d4/0x1e4 [msm]
msm_gem_pin_pages_locked+0x38/0xac [msm]
msm_gem_pin_vma_locked+0x58/0x88 [msm]
msm_ioctl_gem_submit+0xde4/0x13ac [msm]
drm_ioctl_kernel+0xe0/0x15c
drm_ioctl+0x2e8/0x3f4
vfs_ioctl+0x30/0x50
...
Chain exists of:
console_owner --> &port_lock_key --> free_entries_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(free_entries_lock);
lock(&port_lock_key);
lock(free_entries_lock);
lock(console_owner);
*** DEADLOCK ***
Call trace:
dump_backtrace+0xb4/0xf0
show_stack+0x20/0x30
dump_stack_lvl+0x60/0x84
dump_stack+0x18/0x24
print_circular_bug+0x1cc/0x234
check_noncircular+0x78/0xac
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
consol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: sun6i: reduce DMA RX transfer width to single byte
Through empirical testing it has been determined that sometimes RX SPI
transfers with DMA enabled return corrupted data. This is down to single
or even multiple bytes lost during DMA transfer from SPI peripheral to
memory. It seems the RX FIFO within the SPI peripheral can become
confused when performing bus read accesses wider than a single byte to it
during an active SPI transfer.
This patch reduces the width of individual DMA read accesses to the
RX FIFO to a single byte to mitigate that issue. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Fix possible deadlocks in core system-wide PM code
It is reported that in low-memory situations the system-wide resume core
code deadlocks, because async_schedule_dev() executes its argument
function synchronously if it cannot allocate memory (and not only in
that case) and that function attempts to acquire a mutex that is already
held. Executing the argument function synchronously from within
dpm_async_fn() may also be problematic for ordering reasons (it may
cause a consumer device's resume callback to be invoked before a
requisite supplier device's one, for example).
Address this by changing the code in question to use
async_schedule_dev_nocall() for scheduling the asynchronous
execution of device suspend and resume functions and to directly
run them synchronously if async_schedule_dev_nocall() returns false. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range
When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
__arm_smmu_tlb_inv_range+0x118/0x254
arm_smmu_tlb_inv_range_asid+0x6c/0x130
arm_smmu_mm_invalidate_range+0xa0/0xa4
__mmu_notifier_invalidate_range_end+0x88/0x120
unmap_vmas+0x194/0x1e0
unmap_region+0xb4/0x144
do_mas_align_munmap+0x290/0x490
do_mas_munmap+0xbc/0x124
__vm_munmap+0xa8/0x19c
__arm64_sys_munmap+0x28/0x50
invoke_syscall+0x78/0x11c
el0_svc_common.constprop.0+0x58/0x1c0
do_el0_svc+0x34/0x60
el0_svc+0x2c/0xd4
el0t_64_sync_handler+0x114/0x140
el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------
Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed
to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains.
The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called
typically next to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_arch_invalidate_secondary_tlbs {
arm_smmu_mm_arch_invalidate_secondary_tlbs {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: hub: Guard against accesses to uninitialized BOS descriptors
Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h
access fields inside udev->bos without checking if it was allocated and
initialized. If usb_get_bos_descriptor() fails for whatever
reason, udev->bos will be NULL and those accesses will result in a
crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1>
Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:hub_port_reset+0x193/0x788
Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9
RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310
RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840
RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0
Call Trace:
hub_event+0x73f/0x156e
? hub_activate+0x5b7/0x68f
process_one_work+0x1a2/0x487
worker_thread+0x11a/0x288
kthread+0x13a/0x152
? process_one_work+0x487/0x487
? kthread_associate_blkcg+0x70/0x70
ret_from_fork+0x1f/0x30
Fall back to a default behavior if the BOS descriptor isn't accessible
and skip all the functionalities that depend on it: LPM support checks,
Super Speed capabilitiy checks, U1/U2 states setup. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: powermate - fix use-after-free in powermate_config_complete
syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct. When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.
Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.
[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: ohci-tmio: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl(). |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Drop WARN_ON_ONCE() from flush_cache_vmap
I have observed warning to occassionally trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix general protection fault in hfs_find_init()
The hfs_find_init() method can trigger the crash
if tree pointer is NULL:
[ 45.746290][ T9787] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KAI
[ 45.747287][ T9787] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
[ 45.748716][ T9787] CPU: 2 UID: 0 PID: 9787 Comm: repro Not tainted 6.16.0-rc3 #10 PREEMPT(full)
[ 45.750250][ T9787] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 45.751983][ T9787] RIP: 0010:hfs_find_init+0x86/0x230
[ 45.752834][ T9787] Code: c1 ea 03 80 3c 02 00 0f 85 9a 01 00 00 4c 8d 6b 40 48 c7 45 18 00 00 00 00 48 b8 00 00 00 00 00 fc
[ 45.755574][ T9787] RSP: 0018:ffffc90015157668 EFLAGS: 00010202
[ 45.756432][ T9787] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff819a4d09
[ 45.757457][ T9787] RDX: 0000000000000008 RSI: ffffffff819acd3a RDI: ffffc900151576e8
[ 45.758282][ T9787] RBP: ffffc900151576d0 R08: 0000000000000005 R09: 0000000000000000
[ 45.758943][ T9787] R10: 0000000080000000 R11: 0000000000000001 R12: 0000000000000004
[ 45.759619][ T9787] R13: 0000000000000040 R14: ffff88802c50814a R15: 0000000000000000
[ 45.760293][ T9787] FS: 00007ffb72734540(0000) GS:ffff8880cec64000(0000) knlGS:0000000000000000
[ 45.761050][ T9787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 45.761606][ T9787] CR2: 00007f9bd8225000 CR3: 000000010979a000 CR4: 00000000000006f0
[ 45.762286][ T9787] Call Trace:
[ 45.762570][ T9787] <TASK>
[ 45.762824][ T9787] hfs_ext_read_extent+0x190/0x9d0
[ 45.763269][ T9787] ? submit_bio_noacct_nocheck+0x2dd/0xce0
[ 45.763766][ T9787] ? __pfx_hfs_ext_read_extent+0x10/0x10
[ 45.764250][ T9787] hfs_get_block+0x55f/0x830
[ 45.764646][ T9787] block_read_full_folio+0x36d/0x850
[ 45.765105][ T9787] ? __pfx_hfs_get_block+0x10/0x10
[ 45.765541][ T9787] ? const_folio_flags+0x5b/0x100
[ 45.765972][ T9787] ? __pfx_hfs_read_folio+0x10/0x10
[ 45.766415][ T9787] filemap_read_folio+0xbe/0x290
[ 45.766840][ T9787] ? __pfx_filemap_read_folio+0x10/0x10
[ 45.767325][ T9787] ? __filemap_get_folio+0x32b/0xbf0
[ 45.767780][ T9787] do_read_cache_folio+0x263/0x5c0
[ 45.768223][ T9787] ? __pfx_hfs_read_folio+0x10/0x10
[ 45.768666][ T9787] read_cache_page+0x5b/0x160
[ 45.769070][ T9787] hfs_btree_open+0x491/0x1740
[ 45.769481][ T9787] hfs_mdb_get+0x15e2/0x1fb0
[ 45.769877][ T9787] ? __pfx_hfs_mdb_get+0x10/0x10
[ 45.770316][ T9787] ? find_held_lock+0x2b/0x80
[ 45.770731][ T9787] ? lockdep_init_map_type+0x5c/0x280
[ 45.771200][ T9787] ? lockdep_init_map_type+0x5c/0x280
[ 45.771674][ T9787] hfs_fill_super+0x38e/0x720
[ 45.772092][ T9787] ? __pfx_hfs_fill_super+0x10/0x10
[ 45.772549][ T9787] ? snprintf+0xbe/0x100
[ 45.772931][ T9787] ? __pfx_snprintf+0x10/0x10
[ 45.773350][ T9787] ? do_raw_spin_lock+0x129/0x2b0
[ 45.773796][ T9787] ? find_held_lock+0x2b/0x80
[ 45.774215][ T9787] ? set_blocksize+0x40a/0x510
[ 45.774636][ T9787] ? sb_set_blocksize+0x176/0x1d0
[ 45.775087][ T9787] ? setup_bdev_super+0x369/0x730
[ 45.775533][ T9787] get_tree_bdev_flags+0x384/0x620
[ 45.775985][ T9787] ? __pfx_hfs_fill_super+0x10/0x10
[ 45.776453][ T9787] ? __pfx_get_tree_bdev_flags+0x10/0x10
[ 45.776950][ T9787] ? bpf_lsm_capable+0x9/0x10
[ 45.777365][ T9787] ? security_capable+0x80/0x260
[ 45.777803][ T9787] vfs_get_tree+0x8e/0x340
[ 45.778203][ T9787] path_mount+0x13de/0x2010
[ 45.778604][ T9787] ? kmem_cache_free+0x2b0/0x4c0
[ 45.779052][ T9787] ? __pfx_path_mount+0x10/0x10
[ 45.779480][ T9787] ? getname_flags.part.0+0x1c5/0x550
[ 45.779954][ T9787] ? putname+0x154/0x1a0
[ 45.780335][ T9787] __x64_sys_mount+0x27b/0x300
[ 45.780758][ T9787] ? __pfx___x64_sys_mount+0x10/0x10
[ 45.781232][ T9787]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: check msg length in SMBUS block read
For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: remove WARN on bad firmware input
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: fix memory leak of ECC engine conf
Memory allocated for the ECC engine conf is not released during spinand
cleanup. Below kmemleak trace is seen for this memory leak:
unreferenced object 0xffffff80064f00e0 (size 8):
comm "swapper/0", pid 1, jiffies 4294937458
hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace (crc 0):
kmemleak_alloc+0x30/0x40
__kmalloc_cache_noprof+0x208/0x3c0
spinand_ondie_ecc_init_ctx+0x114/0x200
nand_ecc_init_ctx+0x70/0xa8
nanddev_ecc_engine_init+0xec/0x27c
spinand_probe+0xa2c/0x1620
spi_mem_probe+0x130/0x21c
spi_probe+0xf0/0x170
really_probe+0x17c/0x6e8
__driver_probe_device+0x17c/0x21c
driver_probe_device+0x58/0x180
__device_attach_driver+0x15c/0x1f8
bus_for_each_drv+0xec/0x150
__device_attach+0x188/0x24c
device_initial_probe+0x10/0x20
bus_probe_device+0x11c/0x160
Fix the leak by calling nanddev_ecc_engine_cleanup() inside
spinand_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: exit after state insertion failure at btrfs_convert_extent_bit()
If insert_state() state failed it returns an error pointer and we call
extent_io_tree_panic() which will trigger a BUG() call. However if
CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then
we fallthrough and call cache_state() which will dereference the error
pointer, resulting in an invalid memory access.
So jump to the 'out' label after calling extent_io_tree_panic(), it also
makes the code more clear besides dealing with the exotic scenario where
CONFIG_BUG is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: lzo - Fix compression buffer overrun
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
syzbot reports a data-race when accessing the event_triggered, here is the
simplified stack when the issue occurred:
==================================================================
BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed
write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0:
virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653
start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3800 [inline]
read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1:
virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline]
virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566
skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777
vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715
__handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158
handle_irq_event_percpu kernel/irq/handle.c:193 [inline]
value changed: 0x01 -> 0x00
==================================================================
When the data race occurs, the function virtqueue_enable_cb_delayed() sets
event_triggered to false, and virtqueue_disable_cb_split/packed() reads it
as false due to the race condition. Since event_triggered is an unreliable
hint used for optimization, this should only cause the driver temporarily
suggest that the device not send an interrupt notification when the event
index is used.
Fix this KCSAN reported data-race issue by explicitly tagging the access as
data_racy. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs_prelim_ref() calls the old and new reference variables in the
incorrect order. This causes a NULL pointer dereference because oldref
is passed as NULL to trace_btrfs_prelim_ref_insert().
Note, trace_btrfs_prelim_ref_insert() is being called with newref as
oldref (and oldref as NULL) on purpose in order to print out
the values of newref.
To reproduce:
echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable
Perform some writeback operations.
Backtrace:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130
Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88
RSP: 0018:ffffce44820077a0 EFLAGS: 00010286
RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b
RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000
R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540
FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
prelim_ref_insert+0x1c1/0x270
find_parent_nodes+0x12a6/0x1ee0
? __entry_text_end+0x101f06/0x101f09
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
btrfs_is_data_extent_shared+0x167/0x640
? fiemap_process_hole+0xd0/0x2c0
extent_fiemap+0xa5c/0xbc0
? __entry_text_end+0x101f05/0x101f09
btrfs_fiemap+0x7e/0xd0
do_vfs_ioctl+0x425/0x9d0
__x64_sys_ioctl+0x75/0xc0 |
