| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ensure pages are unlocked on cow_file_range() failure
There is a hung_task report on zoned btrfs like below.
https://github.com/naota/linux/issues/59
[726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds.
[726.329839] Not tainted 5.16.0-rc1+ #1
[726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[726.331603] task:rocksdb:high0 state:D stack: 0 pid:11085 ppid: 11082 flags:0x00000000
[726.331608] Call Trace:
[726.331611] <TASK>
[726.331614] __schedule+0x2e5/0x9d0
[726.331622] schedule+0x58/0xd0
[726.331626] io_schedule+0x3f/0x70
[726.331629] __folio_lock+0x125/0x200
[726.331634] ? find_get_entries+0x1bc/0x240
[726.331638] ? filemap_invalidate_unlock_two+0x40/0x40
[726.331642] truncate_inode_pages_range+0x5b2/0x770
[726.331649] truncate_inode_pages_final+0x44/0x50
[726.331653] btrfs_evict_inode+0x67/0x480
[726.331658] evict+0xd0/0x180
[726.331661] iput+0x13f/0x200
[726.331664] do_unlinkat+0x1c0/0x2b0
[726.331668] __x64_sys_unlink+0x23/0x30
[726.331670] do_syscall_64+0x3b/0xc0
[726.331674] entry_SYSCALL_64_after_hwframe+0x44/0xae
[726.331677] RIP: 0033:0x7fb9490a171b
[726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b
[726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300
[726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000
[726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000
[726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260
[726.331693] </TASK>
While we debug the issue, we found running fstests generic/551 on 5GB
non-zoned null_blk device in the emulated zoned mode also had a
similar hung issue.
Also, we can reproduce the same symptom with an error injected
cow_file_range() setup.
The hang occurs when cow_file_range() fails in the middle of
allocation. cow_file_range() called from do_allocation_zoned() can
split the give region ([start, end]) for allocation depending on
current block group usages. When btrfs can allocate bytes for one part
of the split regions but fails for the other region (e.g. because of
-ENOSPC), we return the error leaving the pages in the succeeded regions
locked. Technically, this occurs only when @unlock == 0. Otherwise, we
unlock the pages in an allocated region after creating an ordered
extent.
Considering the callers of cow_file_range(unlock=0) won't write out
the pages, we can unlock the pages on error exit from
cow_file_range(). So, we can ensure all the pages except @locked_page
are unlocked on error case.
In summary, cow_file_range now behaves like this:
- page_started == 1 (return value)
- All the pages are unlocked. IO is started.
- unlock == 1
- All the pages except @locked_page are unlocked in any case
- unlock == 0
- On success, all the pages are locked for writing out them
- On failure, all the pages except @locked_page are unlocked |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size
On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.
The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.
The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).
[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166] <TASK>
[75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520] ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431] ? memcpy+0x4e/0x60
[75721.781931] split_leaf+0x433/0x12d0 [btrfs]
[75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300] ? lock_downgrade+0x7c0/0x7c0
[75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313] ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085] ? lock_release+0x552/0xf80
[75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886] ? __kasan_check_write+0x14/0x20
[75721.895152] ? do_raw_read_unlock+0x44/0x80
[75721.901323] ? _raw_write_lock_irq+0x60/0x80
[75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166] ? _raw_write_unlock+0x23/0x40
[75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906] ? try_to_wake_up+0x30/0x14a0
[75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661] ? rcu
---truncated--- |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.893 and Application versions prior to 20.0.2140 (macOS/Linux client deployments) are built against OpenSSL 1.0.2h-fips (released May 2016), which has been end-of-life since 2019 and is no longer supported by the OpenSSL project. Continued use of this outdated cryptographic library exposes deployments to known vulnerabilities that are no longer patched, weakening the overall security posture. Affected daemons may emit deprecation warnings and rely on cryptographic components with unresolved security flaws, potentially enabling attackers to exploit weaknesses in TLS/SSL processing or cryptographic operations. This vulnerability has been identified by the vendor as: V-2023-021 — Out-of-Date OpenSSL Library. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application versions prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local inter-process communication (IPC) mechanism. The software stores IPC request and response files inside /opt/PrinterInstallerClient/tmp with world-readable and world-writable permissions. Any local user can craft malicious request files that are processed by privileged daemons, leading to unauthorized actions being executed in other user sessions. This breaks user session isolation, potentially allowing local attackers to hijack sessions, perform unintended actions in the context of other users, and impact system integrity and availability. This vulnerability has been identified by the vendor as: V-2022-004 — Client Inter-process Security. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local logging mechanism. Authentication session tokens, including PHPSESSID, XSRF-TOKEN, and laravel_session, are stored in cleartext within world-readable log files. Any local user with access to the machine can extract these session tokens and use them to authenticate remotely to the SaaS environment, bypassing normal login credentials, potentially leading to unauthorized system access and exposure of sensitive information. This vulnerability has been identified by the vendor as: V-2022-008 — Secrets Leaked in Logs. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors
If dw_pcie_ep_init() fails to perform any action after the EPC memory is
initialized and the MSI memory region is allocated, the latter parts won't
be undone thus causing a memory leak. Add a cleanup-on-error path to fix
these leaks.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix get_nodes out of bound access
When user specified more nodes than supported, get_nodes will access nmask
array out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix potential NULL dereference in __kernfs_remove
When lockdep is enabled, lockdep_assert_held_write would
cause potential NULL pointer dereference.
Fix the following smatch warnings:
fs/kernfs/dir.c:1353 __kernfs_remove() warn: variable dereferenced before check 'kn' (see line 1346) |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential deadlock in __driver_attach
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
[ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid:
0 flags:0x00004000
[ 370.788865] Call Trace:
[ 370.789374] <TASK>
[ 370.789841] __schedule+0x482/0x1050
[ 370.790613] schedule+0x92/0x1a0
[ 370.791290] schedule_preempt_disabled+0x2c/0x50
[ 370.792256] __mutex_lock.isra.0+0x757/0xec0
[ 370.793158] __mutex_lock_slowpath+0x1f/0x30
[ 370.794079] mutex_lock+0x50/0x60
[ 370.794795] __device_driver_lock+0x2f/0x70
[ 370.795677] ? driver_probe_device+0xd0/0xd0
[ 370.796576] __driver_attach_async_helper+0x1d/0xd0
[ 370.797318] ? driver_probe_device+0xd0/0xd0
[ 370.797957] async_schedule_node_domain+0xa5/0xc0
[ 370.798652] async_schedule_node+0x19/0x30
[ 370.799243] __driver_attach+0x246/0x290
[ 370.799828] ? driver_allows_async_probing+0xa0/0xa0
[ 370.800548] bus_for_each_dev+0x9d/0x130
[ 370.801132] driver_attach+0x22/0x30
[ 370.801666] bus_add_driver+0x290/0x340
[ 370.802246] driver_register+0x88/0x140
[ 370.802817] ? virtio_scsi_init+0x116/0x116
[ 370.803425] scsi_register_driver+0x1a/0x30
[ 370.804057] init_sd+0x184/0x226
[ 370.804533] do_one_initcall+0x71/0x3a0
[ 370.805107] kernel_init_freeable+0x39a/0x43a
[ 370.805759] ? rest_init+0x150/0x150
[ 370.806283] kernel_init+0x26/0x230
[ 370.806799] ret_from_fork+0x1f/0x30
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`
Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix memleak in aa_simple_write_to_buffer()
When copy_from_user failed, the memory is freed by kvfree. however the
management struct and data blob are allocated independently, so only
kvfree(data) cause a memleak issue here. Use aa_put_loaddata(data) to
fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-mem: Add fix to avoid divide error
For some SPI flash memory operations, dummy bytes are not mandatory. For
example, in Winbond SPINAND flash memory devices, the `write_cache` and
`update_cache` operation variants have zero dummy bytes. Calculating the
duration for SPI memory operations with zero dummy bytes causes
a divide error when `ncycles` is calculated in the
spi_mem_calc_op_duration().
Add changes to skip the 'ncylcles' calculation for zero dummy bytes.
Following divide error is fixed by this change:
Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
...
? do_trap+0xdb/0x100
? do_error_trap+0x75/0xb0
? spi_mem_calc_op_duration+0x56/0xb0
? exc_divide_error+0x3b/0x70
? spi_mem_calc_op_duration+0x56/0xb0
? asm_exc_divide_error+0x1b/0x20
? spi_mem_calc_op_duration+0x56/0xb0
? spinand_select_op_variant+0xee/0x190 [spinand]
spinand_match_and_init+0x13e/0x1a0 [spinand]
spinand_manufacturer_match+0x6e/0xa0 [spinand]
spinand_probe+0x357/0x7f0 [spinand]
? kernfs_activate+0x87/0xd0
spi_mem_probe+0x7a/0xb0
spi_probe+0x7d/0x130 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix reference count leak in aa_pivotroot()
The aa_pivotroot() function has a reference counting bug in a specific
path. When aa_replace_current_label() returns on success, the function
forgets to decrement the reference count of “target”, which is
increased earlier by build_pivotroot(), causing a reference leak.
Fix it by decreasing the refcount of “target” in that path. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:
BUG: kernel NULL pointer dereference, address: 0000000000000024
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:get_event_field.isra.0+0x0/0x50
Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
Call Trace:
<TASK>
get_eprobe_size+0xb4/0x640
? __mod_node_page_state+0x72/0xc0
__eprobe_trace_func+0x59/0x1a0
? __mod_lruvec_page_state+0xaa/0x1b0
? page_remove_file_rmap+0x14/0x230
? page_remove_rmap+0xda/0x170
event_triggers_call+0x52/0xe0
trace_event_buffer_commit+0x18f/0x240
trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
try_to_wake_up+0x260/0x4c0
__wake_up_common+0x80/0x180
__wake_up_common_lock+0x7c/0xc0
do_notify_parent+0x1c9/0x2a0
exit_notify+0x1a9/0x220
do_exit+0x2ba/0x450
do_group_exit+0x2d/0x90
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Obviously this is not the desired result.
Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix dummy res NULL ptr deref bug
Check the bo->resource value before accessing the resource
mem_type.
v2: Fix commit description unwrapped warning
<log snip>
[ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
[ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
[ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1
[ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
[ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm]
[ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58
[ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202
[ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b
[ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010
[ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000
[ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110
[ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208
[ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000
[ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0
[ 40.214469][ T184] Call Trace:
[ 40.214974][ T184] <TASK>
[ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm]
[ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240
[ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm]
[ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm]
[ 40.219410][ T184] ? shmem_get_inode+0x744/0x980
[ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm]
[ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper]
[ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm]
[ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0
[ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280
[ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper]
[ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper]
[ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180
[ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper]
[ 40.238864][ T184] ? local_pci_probe+0xdf/0x180
[ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper]
[ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm]
[ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm]
[ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm]
[ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper]
[ 40.245226][ T184] ? __cond_resched+0x1c/0xc0
[ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper]
[ 40.247316][ T184] ? mutex_unlock+0x80/0x100
[ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0
[ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper]
[ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper]
[ 40.251540][ T184] ? __cond_resched+0x1c/0xc0
[ 40.252321][ T184] ? mutex_lock+0x9f/0x100
[ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper]
[ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper]
[ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper]
[ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs]
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
The bpf_sys_bpf() helper function allows an eBPF program to load another
eBPF program from within the kernel. In this case the argument union
bpf_attr pointer (as well as the insns and license pointers inside) is a
kernel address instead of a userspace address (which is the case of a
usual bpf() syscall). To make the memory copying process in the syscall
work in both cases, bpfptr_t was introduced to wrap around the pointer
and distinguish its origin. Specifically, when copying memory contents
from a bpfptr_t, a copy_from_user() is performed in case of a userspace
address and a memcpy() is performed for a kernel address.
This can lead to problems because the in-kernel pointer is never checked
for validity. The problem happens when an eBPF syscall program tries to
call bpf_sys_bpf() to load a program but provides a bad insns pointer --
say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf()
which would then call bpf_prog_load() to load the program.
bpf_prog_load() is responsible for copying the eBPF instructions to the
newly allocated memory for the program; it creates a kernel bpfptr_t for
insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t
operations are backed by the corresponding sockptr_t operations, which
performs direct memcpy() on kernel pointers for copy_from/strncpy_from
operations. Therefore, the code is always happy to dereference the bad
pointer to trigger a un-handle-able page fault and in turn an oops.
However, this is not supposed to happen because at that point the eBPF
program is already verified and should not cause a memory error.
Sample KASAN trace:
[ 25.685056][ T228] ==================================================================
[ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30
[ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228
[ 25.686732][ T228]
[ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7
[ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
[ 25.687991][ T228] Call Trace:
[ 25.688223][ T228] <TASK>
[ 25.688429][ T228] dump_stack_lvl+0x73/0x9e
[ 25.688747][ T228] print_report+0xea/0x200
[ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.689401][ T228] ? _printk+0x54/0x6e
[ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0
[ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.690412][ T228] kasan_report+0xb5/0xe0
[ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0
[ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691734][ T228] memcpy+0x25/0x60
[ 25.692000][ T228] copy_from_bpfptr+0x21/0x30
[ 25.692328][ T228] bpf_prog_load+0x604/0x9e0
[ 25.692653][ T228] ? cap_capable+0xb4/0xe0
[ 25.692956][ T228] ? security_capable+0x4f/0x70
[ 25.693324][ T228] __sys_bpf+0x3af/0x580
[ 25.693635][ T228] bpf_sys_bpf+0x45/0x240
[ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd
[ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0
[ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0
[ 25.695144][ T228] bpf_prog_test_run+0x172/0x190
[ 25.695487][ T228] __sys_bpf+0x2c5/0x580
[ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50
[ 25.696084][ T228] do_syscall_64+0x60/0x90
[ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60
[ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0
[ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40
[ 25.697586][ T228] ? do_syscall_64+0x6e/0x90
[ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 25.698312][ T228] RIP: 0033:0x7f6d543fb759
[ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not queue data on closed subflows
Dipanjan reported a syzbot splat at close time:
WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153
inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Modules linked in: uio_ivshmem(OE) uio(E)
CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE
5.19.0-rc6-g2eae0556bb9d #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91
f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b
e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d
RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00
RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002
RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000
R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400
R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258
FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0
Call Trace:
<TASK>
__sk_destruct+0x4f/0x8e0 net/core/sock.c:2067
sk_destruct+0xbd/0xe0 net/core/sock.c:2112
__sk_free+0xef/0x3d0 net/core/sock.c:2123
sk_free+0x78/0xa0 net/core/sock.c:2134
sock_put include/net/sock.h:1927 [inline]
__mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351
__mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828
mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586
process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289
worker_thread+0x623/0x1070 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
The root cause of the problem is that an mptcp-level (re)transmit can
race with mptcp_close() and the packet scheduler checks the subflow
state before acquiring the socket lock: we can try to (re)transmit on
an already closed ssk.
Fix the issue checking again the subflow socket status under the
subflow socket lock protection. Additionally add the missing check
for the fallback-to-tcp case. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Balance device refcount when destroying devices
Using device_find_child() to lookup the proper SCMI device to destroy
causes an unbalance in device refcount, since device_find_child() calls an
implicit get_device(): this, in turns, inhibits the call of the provided
release methods upon devices destruction.
As a consequence, one of the structures that is not freed properly upon
destruction is the internal struct device_private dev->p populated by the
drivers subsystem core.
KMemleak detects this situation since loading/unloding some SCMI driver
causes related devices to be created/destroyed without calling any
device_release method.
unreferenced object 0xffff00000f583800 (size 512):
comm "insmod", pid 227, jiffies 4294912190
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff ........`6......
backtrace (crc 114e2eed):
kmemleak_alloc+0xbc/0xd8
__kmalloc_cache_noprof+0x2dc/0x398
device_add+0x954/0x12d0
device_register+0x28/0x40
__scmi_device_create.part.0+0x1bc/0x380
scmi_device_create+0x2d0/0x390
scmi_create_protocol_devices+0x74/0xf8
scmi_device_request_notifier+0x1f8/0x2a8
notifier_call_chain+0x110/0x3b0
blocking_notifier_call_chain+0x70/0xb0
scmi_driver_register+0x350/0x7f0
0xffff80000a3b3038
do_one_initcall+0x12c/0x730
do_init_module+0x1dc/0x640
load_module+0x4b20/0x5b70
init_module_from_file+0xec/0x158
$ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0
device_add+0x954/0x12d0:
kmalloc_noprof at include/linux/slab.h:901
(inlined by) kzalloc_noprof at include/linux/slab.h:1037
(inlined by) device_private_init at drivers/base/core.c:3510
(inlined by) device_add at drivers/base/core.c:3561
Balance device refcount by issuing a put_device() on devices found via
device_find_child(). |
