| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Perform early GT MMIO initialization to read GMDID
VFs need to communicate with the GuC to obtain the GMDID value
and existing GuC functions used for that assume that the GT has
it's MMIO members already setup. However, due to recent refactoring
the gt->mmio is initialized later, and any attempt by the VF to use
xe_mmio_read|write() from GuC functions will lead to NPD crash due
to unset MMIO register address:
[] xe 0000:00:02.1: [drm] Running in SR-IOV VF mode
[] xe 0000:00:02.1: [drm] GT0: sending H2G MMIO 0x5507
[] BUG: unable to handle page fault for address: 0000000000190240
Since we are already tweaking the id and type of the primary GT to
mimic it's a Media GT before initializing the GuC communication,
we can also call xe_gt_mmio_init() to perform early setup of the
gt->mmio which will make those GuC functions work again. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate: Remove unnecessary driver_lock in set_boost
set_boost is a per-policy function call, hence a driver wide lock is
unnecessary. Also this mutex_acquire can collide with the mutex_acquire
from the mode-switch path in status_store(), which can lead to a
deadlock. So, remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix null-ptr-deref in idpf_features_check
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
... |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Limit signal/freq counts in summary output functions
The debugfs summary output could access uninitialized elements in
the freq_in[] and signal_out[] arrays, causing NULL pointer
dereferences and triggering a kernel Oops (page_fault_oops).
This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the
number of initialized elements, with a maximum of 4 per array.
The summary output functions are updated to respect these limits,
preventing out-of-bounds access and ensuring safe array handling.
Widen the label variables because the change confuses GCC about
max length of the strings. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix UAF when reloading module
hda_generic_machine_select() appends -idisp to the tplg filename by
allocating a new string with devm_kasprintf(), then stores the string
right back into the global variable snd_soc_acpi_intel_hda_machines.
When the module is unloaded, this memory is freed, resulting in a global
variable pointing to freed memory. Reloading the module then triggers
a use-after-free:
BUG: KFENCE: use-after-free read in string+0x48/0xe0
Use-after-free read at 0x00000000967e0109 (in kfence-#99):
string+0x48/0xe0
vsnprintf+0x329/0x6e0
devm_kvasprintf+0x54/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64
allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago):
devm_kmalloc+0x52/0x120
devm_kvasprintf+0x66/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago):
release_nodes+0x43/0xb0
devres_release_all+0x90/0xf0
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x42/0xb0
__do_sys_delete_module+0x1d1/0x310
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by copying the match array with devm_kmemdup_array() before we
modify it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: Add NULL check in sma1307_setting_loaded()
All varibale allocated by kzalloc and devm_kzalloc could be NULL.
Multiple pointer checks and their cleanup are added.
This issue is found by our static analysis tool |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable()
The selftests added to our CI by Bui Quang Minh recently reveals
that there is a mem leak on the error path of virtnet_xsk_pool_enable():
unreferenced object 0xffff88800a68a000 (size 2048):
comm "xdp_helper", pid 318, jiffies 4294692778
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
__kvmalloc_node_noprof+0x402/0x570
virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882)
xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226)
xsk_bind+0x6a5/0x1ae0
__sys_bind+0x15e/0x230
__x64_sys_bind+0x72/0xb0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix invalid context error in dml helper
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
(cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259) |
| In the Linux kernel, the following vulnerability has been resolved:
staging: bcm2835-camera: Initialise dev in v4l2_dev
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to
vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got
a NULL pointer dereference.
Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer
could be passed into v4l2_device_register to set it, however that also
has other effects that would need additional changes. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: module: Fix out-of-bounds relocation access
The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:
RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
write_all_xattrs fs/f2fs/xattr.c:487 [inline]
__f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
__vfs_setxattr+0x115/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
vfs_setxattr+0x13f/0x330 fs/xattr.c:303
setxattr+0x146/0x160 fs/xattr.c:611
path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
__do_sys_lsetxattr fs/xattr.c:653 [inline]
__se_sys_lsetxattr fs/xattr.c:649 [inline]
__x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: Prevent possible adminq overflow/stuck condition
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
There is issue as follows when test f2fs atomic write:
F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock
F2FS-fs (loop0): invalid crc_offset: 0
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix.
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix.
==================================================================
BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0
Read of size 8 at addr 0000000000000028 by task rep/1990
CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report.cold+0x49a/0x6bb
kasan_report+0xa8/0x130
f2fs_get_dnode_of_data+0xac/0x16d0
f2fs_do_write_data_page+0x2a5/0x1030
move_data_page+0x3c5/0xdf0
do_garbage_collect+0x2015/0x36c0
f2fs_gc+0x554/0x1d30
f2fs_balance_fs+0x7f5/0xda0
f2fs_write_single_data_page+0xb66/0xdc0
f2fs_write_cache_pages+0x716/0x1420
f2fs_write_data_pages+0x84f/0x9a0
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x87/0xa0
file_write_and_wait_range+0x157/0x1c0
f2fs_do_sync_file+0x206/0x12d0
f2fs_sync_file+0x99/0xc0
vfs_fsync_range+0x75/0x140
f2fs_file_write_iter+0xd7b/0x1850
vfs_write+0x645/0x780
ksys_write+0xf1/0x1e0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
As 3db1de0e582c commit changed atomic write way which new a cow_inode for
atomic write file, and also mark cow_inode as FI_ATOMIC_FILE.
When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode
which is NULL. Then will trigger null-ptr-deref.
To solve above issue, introduce FI_COW_FILE flag for COW inode.
Fiexes: 3db1de0e582c("f2fs: change the current atomic write way") |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix refcount leak in __xfrm_policy_check()
The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.
Fix it by decreasing the reference count of `pols[0]` in that path. |
| In the Linux kernel, the following vulnerability has been resolved:
can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe
The spin lock tx_handling_spinlock in struct m_can_classdev is not
being initialized. This leads the following spinlock bad magic
complaint from the kernel, eg. when trying to send CAN frames with
cansend from can-utils:
| BUG: spinlock bad magic on CPU#0, cansend/95
| lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
| CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE
| Hardware name: MachineWare SIM-V (DT)
| Call Trace:
| [<ffffffff800133e0>] dump_backtrace+0x1c/0x24
| [<ffffffff800022f2>] show_stack+0x28/0x34
| [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68
| [<ffffffff8000de70>] dump_stack+0x14/0x1c
| [<ffffffff80003134>] spin_dump+0x62/0x6e
| [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142
| [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c
| [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a
| [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee
| [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292
| [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8
| [<ffffffff8073b8fa>] can_send+0xc6/0x242
| [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c
| [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee
| [<ffffffff801d06ea>] vfs_write+0x184/0x3a6
| [<ffffffff801d0a88>] ksys_write+0xa0/0xc0
| [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c
| [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212
| [<ffffffff807a830a>] handle_exception+0x146/0x152
Initializing the spin lock in m_can_class_allocate_dev solves that
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2 fix problems with __nfs42_ssc_open
A destination server while doing a COPY shouldn't accept using the
passed in filehandle if its not a regular filehandle.
If alloc_file_pseudo() has failed, we need to decrement a reference
on the newly created inode, otherwise it leaks. |
