| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix UAF when reloading module
hda_generic_machine_select() appends -idisp to the tplg filename by
allocating a new string with devm_kasprintf(), then stores the string
right back into the global variable snd_soc_acpi_intel_hda_machines.
When the module is unloaded, this memory is freed, resulting in a global
variable pointing to freed memory. Reloading the module then triggers
a use-after-free:
BUG: KFENCE: use-after-free read in string+0x48/0xe0
Use-after-free read at 0x00000000967e0109 (in kfence-#99):
string+0x48/0xe0
vsnprintf+0x329/0x6e0
devm_kvasprintf+0x54/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64
allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago):
devm_kmalloc+0x52/0x120
devm_kvasprintf+0x66/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago):
release_nodes+0x43/0xb0
devres_release_all+0x90/0xf0
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x42/0xb0
__do_sys_delete_module+0x1d1/0x310
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by copying the match array with devm_kmemdup_array() before we
modify it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: Add NULL check in sma1307_setting_loaded()
All varibale allocated by kzalloc and devm_kzalloc could be NULL.
Multiple pointer checks and their cleanup are added.
This issue is found by our static analysis tool |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable()
The selftests added to our CI by Bui Quang Minh recently reveals
that there is a mem leak on the error path of virtnet_xsk_pool_enable():
unreferenced object 0xffff88800a68a000 (size 2048):
comm "xdp_helper", pid 318, jiffies 4294692778
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
__kvmalloc_node_noprof+0x402/0x570
virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882)
xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226)
xsk_bind+0x6a5/0x1ae0
__sys_bind+0x15e/0x230
__x64_sys_bind+0x72/0xb0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix invalid context error in dml helper
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
(cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259) |
| In the Linux kernel, the following vulnerability has been resolved:
staging: bcm2835-camera: Initialise dev in v4l2_dev
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to
vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got
a NULL pointer dereference.
Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer
could be passed into v4l2_device_register to set it, however that also
has other effects that would need additional changes. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: module: Fix out-of-bounds relocation access
The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:
RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
write_all_xattrs fs/f2fs/xattr.c:487 [inline]
__f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
__vfs_setxattr+0x115/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
vfs_setxattr+0x13f/0x330 fs/xattr.c:303
setxattr+0x146/0x160 fs/xattr.c:611
path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
__do_sys_lsetxattr fs/xattr.c:653 [inline]
__se_sys_lsetxattr fs/xattr.c:649 [inline]
__x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: Prevent possible adminq overflow/stuck condition
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
There is issue as follows when test f2fs atomic write:
F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock
F2FS-fs (loop0): invalid crc_offset: 0
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix.
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix.
==================================================================
BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0
Read of size 8 at addr 0000000000000028 by task rep/1990
CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report.cold+0x49a/0x6bb
kasan_report+0xa8/0x130
f2fs_get_dnode_of_data+0xac/0x16d0
f2fs_do_write_data_page+0x2a5/0x1030
move_data_page+0x3c5/0xdf0
do_garbage_collect+0x2015/0x36c0
f2fs_gc+0x554/0x1d30
f2fs_balance_fs+0x7f5/0xda0
f2fs_write_single_data_page+0xb66/0xdc0
f2fs_write_cache_pages+0x716/0x1420
f2fs_write_data_pages+0x84f/0x9a0
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x87/0xa0
file_write_and_wait_range+0x157/0x1c0
f2fs_do_sync_file+0x206/0x12d0
f2fs_sync_file+0x99/0xc0
vfs_fsync_range+0x75/0x140
f2fs_file_write_iter+0xd7b/0x1850
vfs_write+0x645/0x780
ksys_write+0xf1/0x1e0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
As 3db1de0e582c commit changed atomic write way which new a cow_inode for
atomic write file, and also mark cow_inode as FI_ATOMIC_FILE.
When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode
which is NULL. Then will trigger null-ptr-deref.
To solve above issue, introduce FI_COW_FILE flag for COW inode.
Fiexes: 3db1de0e582c("f2fs: change the current atomic write way") |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix refcount leak in __xfrm_policy_check()
The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.
Fix it by decreasing the reference count of `pols[0]` in that path. |
| In the Linux kernel, the following vulnerability has been resolved:
can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe
The spin lock tx_handling_spinlock in struct m_can_classdev is not
being initialized. This leads the following spinlock bad magic
complaint from the kernel, eg. when trying to send CAN frames with
cansend from can-utils:
| BUG: spinlock bad magic on CPU#0, cansend/95
| lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
| CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE
| Hardware name: MachineWare SIM-V (DT)
| Call Trace:
| [<ffffffff800133e0>] dump_backtrace+0x1c/0x24
| [<ffffffff800022f2>] show_stack+0x28/0x34
| [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68
| [<ffffffff8000de70>] dump_stack+0x14/0x1c
| [<ffffffff80003134>] spin_dump+0x62/0x6e
| [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142
| [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c
| [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a
| [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee
| [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292
| [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8
| [<ffffffff8073b8fa>] can_send+0xc6/0x242
| [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c
| [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee
| [<ffffffff801d06ea>] vfs_write+0x184/0x3a6
| [<ffffffff801d0a88>] ksys_write+0xa0/0xc0
| [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c
| [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212
| [<ffffffff807a830a>] handle_exception+0x146/0x152
Initializing the spin lock in m_can_class_allocate_dev solves that
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2 fix problems with __nfs42_ssc_open
A destination server while doing a COPY shouldn't accept using the
passed in filehandle if its not a regular filehandle.
If alloc_file_pseudo() has failed, we need to decrement a reference
on the newly created inode, otherwise it leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout
When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:
(thread 1) | (thread 2)
| pn532_uart_send_frame
pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...)
... | (wait a time)
kfree(pn532) //FREE | pn532_cmd_timeout
| pn532_uart_send_frame
| pn532->... //USE
This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/erofs/fileio: call erofs_onlinefolio_split() after bio_add_folio()
If bio_add_folio() fails (because it is full),
erofs_fileio_scan_folio() needs to submit the I/O request via
erofs_fileio_rq_submit() and allocate a new I/O request with an empty
`struct bio`. Then it retries the bio_add_folio() call.
However, at this point, erofs_onlinefolio_split() has already been
called which increments `folio->private`; the retry will call
erofs_onlinefolio_split() again, but there will never be a matching
erofs_onlinefolio_end() call. This leaves the folio locked forever
and all waiters will be stuck in folio_wait_bit_common().
This bug has been added by commit ce63cb62d794 ("erofs: support
unencoded inodes for fileio"), but was practically unreachable because
there was room for 256 folios in the `struct bio` - until commit
9f74ae8c9ac9 ("erofs: shorten bvecs[] for file-backed mounts") which
reduced the array capacity to 16 folios.
It was now trivial to trigger the bug by manually invoking readahead
from userspace, e.g.:
posix_fadvise(fd, 0, st.st_size, POSIX_FADV_WILLNEED);
This should be fixed by invoking erofs_onlinefolio_split() only after
bio_add_folio() has succeeded. This is safe: asynchronous completions
invoking erofs_onlinefolio_end() will not unlock the folio because
erofs_fileio_scan_folio() is still holding a reference to be released
by erofs_onlinefolio_end() at the end. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix space cache corruption and potential double allocations
When testing space_cache v2 on a large set of machines, we encountered a
few symptoms:
1. "unable to add free space :-17" (EEXIST) errors.
2. Missing free space info items, sometimes caught with a "missing free
space info for X" error.
3. Double-accounted space: ranges that were allocated in the extent tree
and also marked as free in the free space tree, ranges that were
marked as allocated twice in the extent tree, or ranges that were
marked as free twice in the free space tree. If the latter made it
onto disk, the next reboot would hit the BUG_ON() in
add_new_free_space().
4. On some hosts with no on-disk corruption or error messages, the
in-memory space cache (dumped with drgn) disagreed with the free
space tree.
All of these symptoms have the same underlying cause: a race between
caching the free space for a block group and returning free space to the
in-memory space cache for pinned extents causes us to double-add a free
range to the space cache. This race exists when free space is cached
from the free space tree (space_cache=v2) or the extent tree
(nospace_cache, or space_cache=v1 if the cache needs to be regenerated).
struct btrfs_block_group::last_byte_to_unpin and struct
btrfs_block_group::progress are supposed to protect against this race,
but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when
waiting for a transaction commit") subtly broke this by allowing
multiple transactions to be unpinning extents at the same time.
Specifically, the race is as follows:
1. An extent is deleted from an uncached block group in transaction A.
2. btrfs_commit_transaction() is called for transaction A.
3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed
ref for the deleted extent.
4. __btrfs_free_extent() -> do_free_extent_accounting() ->
add_to_free_space_tree() adds the deleted extent back to the free
space tree.
5. do_free_extent_accounting() -> btrfs_update_block_group() ->
btrfs_cache_block_group() queues up the block group to get cached.
block_group->progress is set to block_group->start.
6. btrfs_commit_transaction() for transaction A calls
switch_commit_roots(). It sets block_group->last_byte_to_unpin to
block_group->progress, which is block_group->start because the block
group hasn't been cached yet.
7. The caching thread gets to our block group. Since the commit roots
were already switched, load_free_space_tree() sees the deleted extent
as free and adds it to the space cache. It finishes caching and sets
block_group->progress to U64_MAX.
8. btrfs_commit_transaction() advances transaction A to
TRANS_STATE_SUPER_COMMITTED.
9. fsync calls btrfs_commit_transaction() for transaction B. Since
transaction A is already in TRANS_STATE_SUPER_COMMITTED and the
commit is for fsync, it advances.
10. btrfs_commit_transaction() for transaction B calls
switch_commit_roots(). This time, the block group has already been
cached, so it sets block_group->last_byte_to_unpin to U64_MAX.
11. btrfs_commit_transaction() for transaction A calls
btrfs_finish_extent_commit(), which calls unpin_extent_range() for
the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by
transaction B!), so it adds the deleted extent to the space cache
again!
This explains all of our symptoms above:
* If the sequence of events is exactly as described above, when the free
space is re-added in step 11, it will fail with EEXIST.
* If another thread reallocates the deleted extent in between steps 7
and 11, then step 11 will silently re-add that space to the space
cache as free even though it is actually allocated. Then, if that
space is allocated *again*, the free space tree will be corrupted
(namely, the wrong item will be deleted).
* If we don't catch this free space tree corr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_tproxy: restrict to prerouting hook
TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this.
This fixes a crash (null dereference) when using tproxy from e.g. output. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered.
Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and
ldev->pf[MLX5_LAG_P1].dev have valid pointers when
MLX5_LAG_FLAG_NDEVS_READY is set.
The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and
clearing it. Setting it is done wrongly when both
ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set;
clearing it is done right when either of ldev->pf[i].netdev is cleared.
Consider the following scenario:
1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer
2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and
ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in
MLX5_LAG_FLAG_NDEVS_READY is set.
3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev.
MLX5_LAG_FLAG_NDEVS_READY remains set.
Further execution of mlx5_do_bond() will result in null pointer
dereference when calling mlx5_lag_is_multipath()
This patch fixes the following call trace actually encountered:
[ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8
[ 1293.478756] #PF: supervisor read access in kernel mode
[ 1293.481320] #PF: error_code(0x0000) - not-present page
[ 1293.483686] PGD 0 P4D 0
[ 1293.484434] Oops: 0000 [#1] SMP PTI
[ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1
[ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core]
[ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8
[ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202
[ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000
[ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000
[ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c
[ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0
[ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858
[ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000
[ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0
[ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 |
