| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposure of sensitive information during transient execution for some TDX within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Cookie policy is observable via built-in browser tools. In the presence of XSS, this could lead to full session compromise. |
| Sending a crafted SOAP "set" operation message within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause Nokia Single RAN baseband OAM service component restart with software versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later.
The OAM service component restarts automatically after the stack overflow without causing a base station restart or network service degradation, and without leaving any permanent impact on the Nokia Single RAN baseband OAM service. |
| Nokia Single RAN baseband software versions earlier than 24R1-SR 2.1 MP contain a SOAP message input validation flaw, which in theory could potentially be used for causing resource exhaustion in the Single RAN baseband OAM service.
No practical exploit has been detected for this flaw. However, the issue has been corrected starting from release 24R1-SR 2.1 MP by adding sufficient input validation for received SOAP requests, effectively mitigating the reported issue. |
| After gaining access to the firmware of a charging station, a file at <redacted> can be accessed to obtain default credentials that are the same across all Iocharger AC model EV chargers.
This issue affects Iocharger firmware for AC models before firmware version 25010801.
The issue is addressed by requiring a mandatory password change on first login, it is still recommended to change the password on older models.
Likelihood: Moderate – The attacker will first have to abuse a code execution or file inclusion vulnerability (for example by using <redacted>.sh) to gain access to the <redacted>.json file, or obtain a firmware dump of the charging station or obtain the firmware via other channels.
Impact: Critical – All chargers using Iocharger firmware for AC models started with the same initial password. For models with firmware version before 25010801 a password change was not mandatory. It is therefore very likely that this firmware password is still active on many chargers. These credentials could, once obtained, allow an attacker to log into many Iocharger charging station, and allow them to execute arbitrary commands via the System → Custom page.
CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, and requires high privileges (PR:H), there is no user interaction required (UI:N). The attack leads to a compromised of the confidentialy of the "super user" credentials of the device (VC:H/VI:N/VA:N), and can subsequently be used to full compromise and other devices (SC:H/SI:H/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y). |
| The <redacted>.so library, which is used by <redacted>, is
vulnerable to a buffer overflow in the code that handles the deletion
of certificates. This buffer overflow can be triggered by providing a
long file path to the <redacted> action of the <redacted>.exe CGI binary or
to the <redacted>.sh CGI script. This binary or script will write this
file path to <redacted>, which is then
read by <redacted>.so
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – An attacker will have to find this exploit by
either obtaining the binaries involved in this vulnerability, or by trial
and error. Furthermore, the attacker will need a (low privilege)
account to gain access to the <redacted>.exe CGI binary or <redacted>.sh
script to trigger the vulnerability, or convince a user with such access
send an HTTP request that triggers it.
Impact: High – The <redacted> process, which we assume is
responsible for OCPP communication, will keep crashing after
performing the exploit. This happens because the buffer overflow
causes the process to segfault before
<redacted> is removed. This means that,
even though <redacted> is automatically restarted, it will crash
again as soon as it tries to parse the text file.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack leads to reducred availability of the device (VC:N/VI:N/VA:H). THere is not impact on subsequent systems. (SC:N/SI:N/SA:N). Alltough this device is an EV charger handing significant amounts of power, we do not forsee a safety impact. The attack can be automated (AU:Y). Because the DoS condition is written to disk persistantly, it cannot be recovered by the user (R:I). |
| There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701.
Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities.
Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect this vulnerability to have a safety impact. The attack can be automated (AU:Y). |
| A vulnerability in the “Hosts” functionality of the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to manipulate the “hosts” file in an unintended manner via a crafted HTTP request. |
| Kieback & Peter's DDC4000 series uses weak credentials, which may allow an unauthenticated attacker to get full admin rights on the system. |
| ASTEVAL is an evaluator of Python expressions and statements. Prior to version 1.0.6, if an attacker can control the input to the `asteval` library, they can bypass asteval's restrictions and execute arbitrary Python code in the context of the application using the library. The vulnerability is rooted in how `asteval` performs handling of `FormattedValue` AST nodes. In particular, the `on_formattedvalue` value uses the dangerous format method of the str class. The code allows an attacker to manipulate the value of the string used in the dangerous call `fmt.format(__fstring__=val)`. This vulnerability can be exploited to access protected attributes by intentionally triggering an `AttributeError` exception. The attacker can then catch the exception and use its `obj` attribute to gain arbitrary access to sensitive or protected object properties. Version 1.0.6 fixes this issue. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. gitoxide-core, which provides most underlying functionality of the gix and ein commands, does not neutralize newlines, backspaces, or control characters—including those that form ANSI escape sequences—that appear in a repository's paths, author and committer names, commit messages, or other metadata. Such text may be written as part of the output of a command, as well as appearing in error messages when an operation fails. This sometimes allows an untrusted repository to misrepresent its contents and to alter or concoct error messages. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| Chisel is a fast TCP/UDP tunnel, transported over HTTP, secured via SSH. The Chisel server doesn't ever read the documented `AUTH` environment variable used to set credentials, which allows any unauthenticated user to connect, even if credentials were set. Anyone running the Chisel server that is using the `AUTH` environment variable to specify credentials to authenticate against is affected by this vulnerability. Chisel is often used to provide an entrypoint to a private network, which means services that are gated by Chisel may be affected. Additionally, Chisel is often used for exposing services to the internet. An attacker could MITM requests by connecting to a Chisel server and requesting to forward traffic from a remote port. This issue has been addressed in release version 1.10.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vim is an improved version of the unix vi text editor. When flushing the typeahead buffer, Vim moves the current position in the typeahead buffer but does not check whether there is enough space left in the buffer to handle the next characters. So this may lead to the tb_off position within the typebuf variable to point outside of the valid buffer size, which can then later lead to a heap-buffer overflow in e.g. ins_typebuf(). Therefore, when flushing the typeahead buffer, check if there is enough space left before advancing the off position. If not, fall back to flush current typebuf contents. It's not quite clear yet, what can lead to this situation. It seems to happen when error messages occur (which will cause Vim to flush the typeahead buffer) in comnination with several long mappgins and so it may eventually move the off position out of a valid buffer size. Impact is low since it is not easily reproducible and requires to have several mappings active and run into some error condition. But when this happens, this will cause a crash. The issue has been fixed as of Vim patch v9.1.0697. Users are advised to upgrade. There are no known workarounds for this issue. |
| kubewarden-controller is a Kubernetes controller that allows you to dynamically register Kubewarden admission policies. By design, AdmissionPolicy and AdmissionPolicyGroup can evaluate only namespaced resources. The resources to be evaluated are determined by the rules provided by the user when defining the policy. There might be Kubernetes namespaced resources that should not be validated by AdmissionPolicy and by the AdmissionPolicyGroup policies because of their sensitive nature. For example, PolicyReport are namespaced resources that contain the list of non compliant objects found inside of a namespace. An attacker can use either an AdmissionPolicy or an AdmissionPolicyGroup to prevent the creation and update of PolicyReport objects to hide non-compliant resources. Moreover, the same attacker might use a mutating AdmissionPolicy to alter the contents of the PolicyReport created inside of the namespace. Starting from the 1.21.0 release, the validation rules applied to AdmissionPolicy and AdmissionPolicyGroup have been tightened to prevent them from validating sensitive types of namespaced resources. |
| A vulnerability in the OTRS Admin Interface and Agent Interface (versions before OTRS 8) allow parameter injection due to for an autheniticated agent or admin user.
This issue affects:
* OTRS 7.0.X
* OTRS 8.0.X
* OTRS 2023.X
* OTRS 2024.X
* OTRS 2025.X
* ((OTRS)) Community Edition: 6.0.x
Products based on the ((OTRS)) Community Edition also very likely to be affected |
| Failure to validate the address and size in TEE (Trusted Execution Environment) may allow a malicious x86 attacker to send malformed messages to the graphics mailbox resulting in an overlap of a TMR (Trusted Memory Region) that was previously allocated by the ASP bootloader leading to a potential loss of integrity. |
| Incorrect initialization of resource in the branch prediction unit for some Intel(R) Core™ Ultra Processors may allow an authenticated user to potentially enable information disclosure via local access. |
| A buffer overflow in the GuitarPro1::read function of MuseScore Studio v4.3.2 allows attackers to to execute arbitrary code or cause a Denial of Service (DoS) via opening a crafted GuitarPro file. |
| A CWE-15 "External Control of System or Configuration Setting" in GE Vernova UR IED family devices from version 7.0 up to 8.60 allows an attacker to provide input that establishes a TCP connection through a port forwarding. The lack of the IP address and port validation may allow the attacker to bypass firewall rules or to send malicious traffic in the network. |
