| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Photoshop Desktop is affected by a Double Free vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return.
Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice.
The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient.
Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, when ImageMagick is built without Cairo support, a crafted RSVG image that reaches a resource limit can cause the RSVG decoder to free image state twice and then use freed memory, crashing the process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: preserve hidden-group beacon IE ownership
A hidden-group probe-response entry borrows its beacon IEs from the
group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such
an entry to cfg80211_update_known_bss() when merging scan entries
after a channel switch.
Copying the borrowed beacon_ies into the associated entry gives the
same allocation two owners. Releasing the group's beacon entry can
then leave the associated entry pointing to freed IEs, which are
freed again when that entry is released.
Skip beacon IE replacement when the source entry belongs to a hidden
group. Preserve probe-response processing, the subsequent metadata
updates, and the existing rejection path for conflicting hidden
beacon updates. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Completely fix fcport double free
In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().
When an error happens, this function is called by qla2x00_sp_release(),
when kref_put() releases the first and the last reference.
qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().
Doing it one more time after kref_put() is a bad idea. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: protect xen_9pfs_front_free against concurrent calls
The xenwatch thread can race with other back-end change notifications
and call xen_9pfs_front_free() twice, hitting the observed general
protection fault due to a double-free. Guard the teardown path so only
one caller can release the front-end state at a time, preventing the
crash.
This is a fix for the following double-free:
[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none)
[ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150
[ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42
[ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246
[ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000
[ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000
[ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000
[ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68
[ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040
[ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000
[ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660
[ 27.052418] Call Trace:
[ 27.052420] <TASK>
[ 27.052422] xen_9pfs_front_changed+0x5d5/0x720
[ 27.052426] ? xenbus_otherend_changed+0x72/0x140
[ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10
[ 27.052434] xenwatch_thread+0x94/0x1c0
[ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10
[ 27.052442] kthread+0xf8/0x240
[ 27.052445] ? __pfx_kthread+0x10/0x10
[ 27.052449] ? __pfx_kthread+0x10/0x10
[ 27.052452] ret_from_fork+0x16b/0x1a0
[ 27.052456] ? __pfx_kthread+0x10/0x10
[ 27.052459] ret_from_fork_asm+0x1a/0x30
[ 27.052463] </TASK>
[ 27.052465] Modules linked in:
[ 27.052471] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix double destruction of rsv_qp
rsv_qp may be double destroyed in error flow, first in free_mr_init(),
and then in hns_roce_exit(). Fix it by moving the free_mr_init() call
into hns_roce_v2_init().
list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240
...
Call trace:
__list_del_entry_valid+0x148/0x240
hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2]
free_mr_exit+0x6c/0x120 [hns_roce_hw_v2]
hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2]
hns_roce_exit+0x118/0x350 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2]
hclge_notify_roce_client+0x6c/0x160 [hclge]
hclge_reset_rebuild+0x150/0x5c0 [hclge]
hclge_reset+0x10c/0x140 [hclge]
hclge_reset_subtask+0x80/0x104 [hclge]
hclge_reset_service_task+0x168/0x3ac [hclge]
hclge_service_task+0x50/0x100 [hclge]
process_one_work+0x250/0x9a0
worker_thread+0x324/0x990
kthread+0x190/0x210
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd: pmf: Use device managed allocations
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops
Fix a kernel oops found while testing the stm32_pcie Endpoint driver
with handling of PERST# deassertion:
During EP initialization, pci_epf_test_alloc_space() allocates all BARs,
which are further freed if epc_set_bar() fails (for instance, due to no
free inbound window).
However, when pci_epc_set_bar() fails, the error path:
pci_epc_set_bar() ->
pci_epf_free_space()
does not clear the previous assignment to epf_test->reg[bar].
Then, if the host reboots, the PERST# deassertion restarts the BAR
allocation sequence with the same allocation failure (no free inbound
window), creating a double free situation since epf_test->reg[bar] was
deallocated and is still non-NULL.
Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space()
invocations are symmetric, and as such, set epf_test->reg[bar] to NULL
when memory is freed.
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix double free err_addr pointer warnings
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages
will be run many times so that double free err_addr in some special case.
So set the err_addr to NULL to avoid the warnings. |
| A double free issue was addressed with improved memory management. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path. |
| Double free in Windows Update Orchestrator Service allows an authorized attacker to elevate privileges locally. |
