Export limit exceeded: 16052 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16052 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-79879 | 2026-10-23 | 8.8 High | ||
| No description provided | ||||
| CVE-2026-79892 | 2026-10-23 | 7.8 High | ||
| No description provided | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-98493 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. | ||||
| CVE-2026-92158 | 1 Nasa | 1 Fprime | 2026-10-22 | 7.2 High |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. | ||||
| CVE-2026-98635 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: block: Fix zones_cond out-of-bounds write on zone report blk_revalidate_disk_zones() sizes the zones_cond array from the disk capacity and zone size, but the index used by blk_revalidate_zone_cond() comes from the device-driven report_zones() walk and is never checked against the array size. A device reporting more zones than fit the array makes blk_zone_set_cond() write out of bounds. One way to reach this is a zone count exceeding 32 bits: both blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 + 1024 zones of one 512-byte logical block) gets its zone count truncated to a small value, undersizing the array while the report walk keeps counting upward. Check the index against the array size before storing the zone condition, and refuse to revalidate when the zone count does not fit 32 bits. | ||||
| CVE-2026-103993 | 1 Juniper Networks | 2 Junos Os, Junos Os Evolved | 2026-10-22 | 6.8 Medium |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. | ||||
| CVE-2026-100236 | 2 Dpdk, Redhat | 4 Dpdk, Enterprise Linux, Openshift and 1 more | 2026-10-22 | 8.6 High |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. | ||||
| CVE-2026-15176 | 1 F5 | 2 Nginx Open Source, Nginx Plus | 2026-10-22 | 8.1 High |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-84419 | 1 Citrix | 1 Workspace App For Windows | 2026-10-22 | N/A |
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows. This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. | ||||
| CVE-2026-93520 | 1 X.org | 1 Xorg-server | 2026-10-22 | 7.8 High |
| A flaw was found in xorg-x11-server. In the X Keyboard Extension (XKB), key name memory is allocated with an insufficient buffer size compared to the maximum supported range. An authenticated local client can exploit this flaw by sending requests that modify the keycode range, triggering a heap-based buffer overflow. This vulnerability can lead to arbitrary code execution or cause a Denial of Service (DoS) by crashing the X server. | ||||
| CVE-2026-112398 | 1 Python-pillow | 1 Pillow | 2026-10-22 | N/A |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's FlashPix JPEG-tile decoder can write decoded scanlines beyond the allocated tile buffer. FlashPix (FPX) JPEG decoding selects raw mode LA with two bytes per pixel, while an unrecognized JPEG mode can be decoded as JCS_UNKNOWN with four components, causing ImagingJpegDecode to write four-component scanlines into the two-byte tile buffer. An attacker can supply a crafted OLE2 FlashPix file to an application with the optional olefile dependency installed that opens or thumbnails untrusted input. This can corrupt heap memory and may allow arbitrary code execution. This issue is fixed in version 13.0.0. | ||||
| CVE-2026-98703 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is a plain u32 attribute, so any value can be written to it. minstrel_ht_update_stats() then copies the value into mi->max_tp_rate[] and mi->max_prob_rate, and minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries) with it. Writing e.g. 65535 selects group 4095 and rate index 15, far outside both arrays. The out-of-bounds entries are dereferenced and updated as struct minstrel_rate_stats (retry counts, etc.), so the invalid index corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is reported as an array-index-out-of-bounds in minstrel_ht_set_rate(). Only a valid group/rate pair, or U32_MAX to disable fixed rate processing, can be used safely, so reject any other value when the debugfs file is written. The file is only reachable through a root-only debugfs mount, so this is not a privilege boundary. The out-of-bounds access is still a bug that must not be reachable through a writable debugfs attribute. | ||||
| CVE-2026-93518 | 1 X.org | 1 Xorg-server | 2026-10-22 | 7.8 High |
| A flaw was found in xorg-x11-server. Due to an integer truncation issue during memory allocation calculations within the X Keyboard Extension (XKB), the server allocates an undersized buffer when resizing key types. An authenticated local client can exploit this vulnerability by sending specially crafted XKB requests, causing a heap-based buffer overflow. This can result in arbitrary code execution or a denial of service (DoS). | ||||
| CVE-2026-98830 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: validate MIB read length before copying to caller wfx_hif_read_mib() copies reply->length bytes from the firmware response into the caller-provided buffer without checking that reply->length does not exceed val_len. A firmware response with a length field larger than expected overruns the caller buffer and reads past the end of the reply allocation. Replace the dead -ENOMEM check with an active validation that reply->length fits within val_len before the memcpy. | ||||
| CVE-2026-115504 | 2026-10-22 | 7.8 High | ||
| CFITSIO through 4.7.0 contains an out-of-bounds write vulnerability in ffgcls2() in getcols.c that trusts attacker-controlled heap descriptor lengths for variable-length string columns. Attackers can supply a crafted FITS file that overflows a fixed 28,800-byte stack buffer and the caller's string array, enabling arbitrary code execution. | ||||
| CVE-2026-91255 | 1 Oracle | 1 Solaris | 2026-10-22 | 7.5 High |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Kernel). The supported version that is affected is 11.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-115393 | 1 Bytecodealliance | 1 Wasmtime | 2026-10-22 | 3.8 Low |
| Wasmtime before 24.0.12, 25.0.0 before 36.0.13, 37.0.0 before 46.0.2, and 47.0.0 before 47.0.3 contains a type confusion vulnerability because several Store APIs fail to validate that objects belong to the Store's Engine. Embedders mixing objects between Engines via Instance::new, StructRefPre::new, or Tag::new can trigger trampoline signature mismatches causing out-of-bounds stack writes, GC heap corruption, or panics. | ||||
| CVE-2026-111497 | 1 Google | 1 Brotli | 2026-10-22 | N/A |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream. Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. | ||||
| CVE-2026-91415 | 1 Oracle | 5 Graalvm, Graalvm Enterprise Edition, Graalvm For Jdk and 2 more | 2026-10-22 | 7 High |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition as well as unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data and unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H). | ||||