Export limit exceeded: 36357 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36357 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-100070 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details? | ||||
| CVE-2026-58015 | 2 Gnome, Redhat | 17 Glib, Ai Inference Server, Cert Manager and 14 more | 2026-10-22 | 5.9 Medium |
| A flaw was found in GLib. The D-Bus client-side implementation of the DBUS_COOKIE_SHA1 SASL authentication mechanism does not validate the cookie_context parameter received from the server. A malicious D-Bus server can supply a cookie_context containing path traversal sequences, causing the client to read an arbitrary file and exfiltrate sensitive data by verifying guessed file contents against a generated hash. | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63849 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) | ||||
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2023-45581 | 1 Fortinet | 2 Forticlient Enterprise Management Server, Forticlientems | 2026-10-22 | 7.9 High |
| An improper privilege management vulnerability [CWE-269] vulnerability in Fortinet FortiClientEMS 7.2.0 through 7.2.2, FortiClientEMS 7.0.6 through 7.0.10, FortiClientEMS 7.0.0 through 7.0.4, FortiClientEMS 6.4 all versions, FortiClientEMS 06.02 all versions, FortiClientEMS 6.2 all versions allows an Site administrator with Super Admin privileges to perform global administrative operations affecting other sites via crafted HTTP or HTTPS requests. | ||||
| CVE-2026-100071 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: free learned nodes on device setup failure hsr_dev_finalize() can fail after a lower-device RX handler has already been registered (slave A is added before the failable slave B and interlink adds). RX handlers run in softirq regardless of the master's state, so frames received in that window can learn dynamic nodes into node_db, and the error unwind never releases them. Free both owned dynamic databases in the unwind, mirroring hsr_dellink(). proxy_node_db is provably empty on every current error exit (only interlink RX feeds it, and the interlink add is the last failable step) and is freed for symmetry. The order is safe: hsr_del_port() unregisters each RX handler with synchronize_net() before hsr_del_nodes() runs, which removes remaining entries with list_del_rcu() and defers their release with call_rcu() for readers already under RCU. | ||||
| CVE-2026-46181 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized. | ||||
| CVE-2025-38372 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling __xa_store() and __xa_erase() were used without holding the proper lock, which led to a lockdep warning due to unsafe RCU usage. This patch replaces them with xa_store() and xa_erase(), which perform the necessary locking internally. ============================= WARNING: suspicious RCPU usage 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted ----------------------------- ./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/u136:0/219: at: process_one_work+0xbe4/0x15f0 process_one_work+0x75c/0x15f0 pagefault_mr+0x9a5/0x1390 [mlx5_ib] stack backtrace: CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] Call Trace: dump_stack_lvl+0xa8/0xc0 lockdep_rcu_suspicious+0x1e6/0x260 xas_create+0xb8a/0xee0 xas_store+0x73/0x14c0 __xa_store+0x13c/0x220 ? xa_store_range+0x390/0x390 ? spin_bug+0x1d0/0x1d0 pagefault_mr+0xcb5/0x1390 [mlx5_ib] ? _raw_spin_unlock+0x1f/0x30 mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib] process_one_work+0x7db/0x15f0 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x57d/0xcd0 ? rescuer_thread+0xc40/0xc40 kthread+0x3b3/0x800 ? kthread_is_per_cpu+0xb0/0xb0 ? lock_downgrade+0x680/0x680 ? do_raw_spin_lock+0x12d/0x270 ? spin_bug+0x1d0/0x1d0 ? finish_task_switch.isra.0+0x284/0x9e0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork+0x2d/0x70 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork_asm+0x11/0x20 | ||||
| CVE-2025-38303 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix possible crashes on eir_create_adv_data eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER without checking if that would fit. | ||||
| CVE-2025-38064 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio: break and reset virtio devices on device_shutdown() Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory accesses during the hang. Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected ... It was traced down to virtio-console. Kexec works fine if virtio-console is not in use. The issue is that virtio-console continues to write to the MMIO even after underlying virtio-pci device is reset. Additionally, Eric noticed that IOMMUs are reset before devices, if devices are not reset on shutdown they continue to poke at guest memory and get errors from the IOMMU. Some devices get wedged then. The problem can be solved by breaking all virtio devices on virtio bus shutdown, then resetting them. | ||||
| CVE-2025-21976 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer. | ||||
| CVE-2025-21885 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-64400 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent path traversal bypass by restricting caseless retry ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path resolution within the share root. When a crafted path attempts to escape the share boundary using parent-directory components ('..'), vfs_path_parent_lookup() detects this and immediately fails, returning -EXDEV. However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode. The function fails to intercept the -EXDEV error and erroneously falls through to the caseless retry logic, which is intended only for genuinely missing files. During this retry process, the path is reconstructed, leading to an unintended LOOKUP_BENEATH bypass that allows write-capable users to create zero-length files or directories outside the exported share. Fix this by ensuring that the execution only proceeds to the caseless lookup retry when the error is specifically -ENOENT. Any other errors, such as -EXDEV from a path traversal attempt, must be returned immediately. | ||||
| CVE-2026-64391 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for ADS I/O Alternate data streams are stored as xattrs. Unlike regular file I/O, their read and write paths therefore call VFS xattr helpers which recheck inode permissions and LSM policy using the current task credentials. Run ADS I/O with the credentials captured when the SMB handle was opened. | ||||
| CVE-2026-64389 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication. | ||||