Export limit exceeded: 15998 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421043 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 51636 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 54461 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54461 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-69657 | 1 Xing | 1 Xing Cptrans-me-x | 2026-09-04 | N/A |
| XING CPTrans-ME-X contains a Use of Default Password (CWE-1393). Anyone with the knowledge of the credential may log in to the affected device. | ||||
| CVE-2023-20577 | 2026-09-04 | 7.4 High | ||
| A heap overflow in SMM module may allow an attacker with access to a second vulnerability that enables writing to SPI flash, potentially resulting in arbitrary code execution. | ||||
| CVE-2026-47857 | 2 Broadcom, Spring | 2 Reactor Core, Reactor Core | 2026-09-04 | 5.9 Medium |
| In Reactor Core, applications that use the Flux.windowTimeout operator with fairBackpressure enabled are vulnerable to a Denial of Service (DoS) condition. Reactor Core 3.8.0 - 3.8.6 Reactor Core 3.5.0 - 3.7.19 Reactor Core 3.4.41 and earlier | ||||
| CVE-2026-80869 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the attribute-list entry in ntfs_read_inode_mount() The $MFT attribute-list walk in ntfs_read_inode_mount() validates each entry only with "(u8 *)al_entry + 6 > al_end" and "(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference (offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length is attacker-controlled and only required non-zero, so a short entry (e.g. length 8) placed at the tail passes both checks while the lowest_vcn / mft_reference reads fall past al_end. al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding usually absorbs the over-read -- but when attr_list_size is a multiple of SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an out-of-bounds read at mount time. Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch 1/3) before dereferencing it, matching the bound the other attribute-list walks now use. The validator already requires the length to cover the fixed header, which makes the separate "!al_entry->length" check redundant, so drop it too. | ||||
| CVE-2026-80874 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: renesas: ironhide: Describe inline ECC carveouts The DBSC5 DRAM controller protects DRAM content using inline ECC. The inline ECC utilizes areas of DRAM for its operation, which are in the DRAM address range, but must not be accessed or modified. Describe the inline ECC carveout areas used by the DBSC5 controller on this hardware as reserved-memory, which must not be accessed. Include DRAM areas which are unprotected by ECC as well, those are parts of the DRAM which directly precede the ECC carveout. In case of high DRAM utilization, unless the inline ECC carveouts are properly reserved, Linux may use and corrupt the memory used by the DBSC5 DRAM controller for inline ECC, which would lead to the system becoming unstable. | ||||
| CVE-2026-14479 | 1 Autodesk | 1 Installer | 2026-09-04 | 5.5 Medium |
| A maliciously crafted input, when processed by the Autodesk Installer IPC frame parser, may trigger improper validation of an input-specified position or offset, resulting in an out-of-range substring operation. A malicious actor may leverage this vulnerability to cause the NT AUTHORITY\SYSTEM service to terminate unexpectedly, resulting in a denial-of-service condition. | ||||
| CVE-2026-47842 | 2 Spring, Vmware | 2 Spring Security, Spring Security | 2026-09-04 | 6.5 Medium |
| Applications using AesBytesEncryptor with the two-argument constructor or when passing a null IV generator and CBC as the encryption mode encrypt data with AES/CBC using a null (all-zero) initialization vector. Spring Security 7.1.0 Spring Security 7.0.0 - 7.0.6 Spring Security 6.5.0 - 6.5.11 Spring Security 6.4.0 - 6.4.18 Spring Security 5.8.0 - 5.8.27 Spring Security 5.7.0 - 5.7.25 | ||||
| CVE-2026-80839 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject unrepresentable multicast TVLV offsets The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. | ||||
| CVE-2026-59847 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-09-04 | 5.9 Medium |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. | ||||
| CVE-2026-59317 | 2 Spring, Vmware | 2 Spring For Apache Kafka, Spring For Apache Kafka | 2026-09-04 | 6.5 Medium |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation. Spring for Apache Kafka 4.1.0 Spring for Apache Kafka 4.0.0 - 4.0.6 Spring for Apache Kafka 3.0.0 - 3.3.16 Spring for Apache Kafka 2.9.0 - 2.9.14 Spring for Apache Kafka 2.8.12 and earlier | ||||
| CVE-2026-85654 | 1 Amazon | 1 Awslabs.dynamodb-mcp-server | 2026-09-04 | 7.8 High |
| Improper neutralization of special elements used in a template engine in the CDK generator in Amazon awslabs.dynamodb-mcp-server before 2.1.6 might allow a context-dependent actor to execute arbitrary code on the host that deploys the generated application via crafted table, index, or attribute names in a data model file. | ||||
| CVE-2026-85509 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| FreeIPMI before 1.6.19 has a stack-based buffer overflow in _read_fru_data in libfreeipmi/fru/ipmi-fru.c when a BMC returns more bytes than requested. | ||||
| CVE-2026-18167 | 1 Tp-link | 1 Archer Ax55 V4 | 2026-09-04 | N/A |
| A stack-based buffer overflow vulnerability exists in the EasyMesh module of TP-Link Archer AX55 v4. When Mesh mode is enabled, a LAN attacker may submit crafted input that causes the easymesh daemon to crash and may potentially achieve remote code execution on the device. Successful exploitation may cause the EasyMesh daemon to crash and may potentially allow remote code execution when Mesh mode is enabled. This may result in high impact to the confidentiality, integrity, and availability of the affected device. | ||||
| CVE-2026-69419 | 1 Microsoft | 1 Azure Data Manager For Energy | 2026-09-04 | 8.5 High |
| Integer overflow or wraparound in Azure Data Manager for Energy allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-80825 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB header onto every skb and assumes the headroom for them is already there. That holds for locally generated traffic, where mac80211 reserves hw->extra_tx_headroom, but forwarded frames are sent through ieee80211_8023_xmit(), which does not reserve it. Bridge a wired interface to an mt7925u AP and the first forwarded frame that arrives short panics the kernel: skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1 kernel BUG at net/core/skbuff.c:212! Call trace: skb_panic+0x58/0x60 (P) skb_push+0x58/0x60 mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common] mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb] __mt76_tx_queue_skb+0x54/0xe8 [mt76] mt76_txq_schedule.part.0+0x204/0x478 [mt76] mt76_txq_schedule_all+0x50/0x80 [mt76] mt792x_tx_worker+0x68/0x100 [mt792x_lib] __mt76_worker_fn+0x84/0x150 [mt76] Whether a given setup hits it depends on how much headroom the ingress netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging onboard ethernet to a Netgear A9000; originally reported on an MT7986 router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet), which leaves more headroom, helped narrow the trigger to the ingress path. The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76: mt7921: don't assume adequate headroom for SDIO headers"), but mt7925 was copied from mt7921 without the fix. Add the same guard here. | ||||
| CVE-2026-80827 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: option: fix slab OOB read in interrupt URB callback The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(struct usb_ctrlrequest)] which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte buffer. This results in a slab out-of-bounds read. Fix this by adding the missing bounds check: first verify that the actual length is large enough to contain the struct usb_ctrlrequest header before accessing req_pkt->bRequestType and req_pkt->bRequest, and then verify that there is an additional byte for the modem signal state before reading data[sizeof(struct usb_ctrlrequest)] inside the conditional. Use sizeof(*req_pkt) instead of sizeof(struct usb_ctrlrequest) for consistency. [ johan: use dev_err(); split signals declaration and initialisation ] | ||||
| CVE-2026-80829 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output() snd_usbmidi_novation_output() lays out a two-byte header at transfer_buffer[0..1] and passes &transfer_buffer[2] together with a length of ep->max_transfer - 2 to snd_rawmidi_transmit(): count = snd_rawmidi_transmit(ep->ports[0].substream, &transfer_buffer[2], ep->max_transfer - 2); ep->max_transfer comes from the output endpoint's wMaxPacketSize via usb_maxpacket(). A malformed or malicious device can advertise a bulk OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this value downwards - so ep->max_transfer becomes 1 and the count argument becomes -1. snd_rawmidi_transmit() passes the negative count on to __snd_rawmidi_transmit_peek(), where "if (count1 > count) count1 = count" leaves count1 negative; get_aligned_size() keeps it negative for a byte-stream substream, so the following memcpy(buffer, ..., count1) runs with a (size_t)-1 length and writes far past the transfer buffer, which was allocated with usb_alloc_coherent(ep->max_transfer). This is the same class of bug that was fixed for snd_usbmidi_akai_output() in commit 0970274613fb ("ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output()"); the novation output routine was left unguarded. Bail out when the endpoint cannot hold the two-byte header plus at least one payload byte. | ||||
| CVE-2026-80831 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - fix source scatterlist length access mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid and could return zero or a stale DMA length, causing encryption and decryption to process the wrong number of bytes when CONFIG_NEED_SG_DMA_LENGTH=y. Use the original scatterlist length instead. | ||||
| CVE-2022-31684 | 2 Broadcom, Redhat | 3 Reactor Netty, Camel Spring Boot, Openshift Application Runtimes | 2026-09-04 | 4.3 Medium |
| Reactor Netty HTTP Server, in versions 1.0.11 - 1.0.23, may log request headers in some cases of invalid HTTP requests. The logged headers may reveal valid access tokens to those with access to server logs. This may affect only invalid HTTP requests where logging at WARN level is enabled. | ||||
| CVE-2026-80810 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec() io_vec_fill_bvec() computes the folio size with a plain int 1: unsigned long folio_size = 1 << imu->folio_shift; imu->folio_shift is unsigned int and comes from folio_shift() of the folio backing the registered buffer, so it can be 32 or more on a 64 bit kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the count is taken modulo 32, so a shift of 34 yields 4 rather than 16G. Every other folio_shift shift in this file already uses 1UL. The result is that the segment estimate and the fill loop disagree. io_estimate_bvec_size() sizes the bvec array with the real shift: max_segs += (iov[i].iov_len >> shift) + 2; so a 1M iovec on a 16G folio is charged 2 segments, while io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4 bytes and writes res_bvec[bvec_idx] a quarter of a million times, past the end of the array it was given. src_bvec is advanced once per iteration as well, so imu->bvec is read past its end at the same time. validate_fixed_range() only checks that the range is inside the registered buffer and does not bound the segment count. Reaching it needs a folio with a shift of at least 32, which means a gigantic hugetlb page: 16G on arm64 with 64K pages, where CONT_PMD_SHIFT is 34 and hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT) registers that size, and likewise on powerpc. x86_64 tops out at 1G, so a shift of 30, which still fits in int and is unaffected. Use 1UL, as the rest of the file does. | ||||