Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89995 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller. | ||||
| CVE-2026-89988 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Protect kprobe_blacklist with RCU __within_kprobe_blacklist() traverses kprobe_blacklist without holding kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist() removes blacklist entries and immediately frees them with kfree(). A concurrent call to within_kprobe_blacklist() can therefore dereference freed memory. Furthermore, within_kprobe_blacklist() can be called in atomic or non-preemptible contexts where the sleeping kprobe_mutex cannot be taken. Protect kprobe_blacklist with RCU. Use guard(rcu)() and list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim entries safely after a grace period. | ||||
| CVE-2026-89987 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: transfer the pmd dirty bit to the folio on zap zap_huge_pmd_folio() propagates the pmd young bit to the folio for the file case, but not the dirty bit. The pte path does propagate it, in zap_present_folio_ptes() and so does the pmd split path, in __split_huge_pmd_locked(). For most file mappings the omission is harmless, because writing to a shared file mapping goes through page_mkwrite(), which dirties the folio. tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify() is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault(). do_read_fault() does not call fault_dirty_shared_page(), so subsequent stores through that mapping set only the hardware dirty bit in the pmd and never call folio_mark_dirty(). A shmem folio allocated by a fault is marked uptodate but not dirty (see the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at all. Unmapping such a folio - munmap(), or exit_mmap() when the process dies - then loses the only record that it was written, because zap_huge_pmd() drops the pmd without transferring the dirty bit. Reclaim afterwards sees a clean shmem folio: the whole swap-out block in shrink_folio_list() is inside "if (folio_test_dirty(folio))", so pageout() is skipped and the folio falls into __remove_mapping(). There, folio_is_file_lru() is false for a swapbacked folio, so no shadow entry is created and __filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The data is freed without ever being written to swap, and the next fault on that index returns a freshly zeroed folio. This is silent data loss for any process that keeps state in a MAP_SHARED tmpfs segment across an unmap - for example a cache handed from one process generation to the next through /dev/shm. It requires the folio to be PMD-mapped, so it only shows up once shmem THP is enabled (which is what we did in Meta fleet and started noticing crashes); with THP off the pte path transfers the dirty bit correctly. It also only becomes visible when swap is enabled, because with no swap device shmem folios (which are on the anon LRU) are not scanned by reclaim at all, so the clean folio is never dropped. Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a 2MB-backed region, write a known pattern through the resulting mapping, munmap, force reclaim of the cgroup, then re-map and read back. Without this patch the region reads back as zeros and vmstat shows zswpout 0 - the data was discarded rather than swapped. With this patch the region reads back correctly and the pages are swapped out as expected. With huge=never, or when the first touch is a write, the test passes either way. | ||||
| CVE-2026-89980 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state. | ||||
| CVE-2026-89975 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix DHCHAP secret leak on parse failure nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret with match_strdup() before validating the DHHC-1: representation. If validation fails, the parser returns -EINVAL before the temporary string in p is assigned to opts->dhchap_secret or opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts, but nvmf_free_options() cannot release the unassigned temporary string. Each rejected option therefore leaks one allocation. This is easy to miss because valid secrets transfer ownership to opts and are freed normally, while the malformed-secret path still returns the expected -EINVAL to userspace. With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the required-option checks and transport lookup. No NVMe-oF target or working transport connection is required; for example, repeatedly writing dhchap_secret=BAD or dhchap_ctrl_secret=BAD to /dev/nvme-fabrics deterministically takes the leaking parse path. Free the temporary string before leaving both validation error paths. Use kfree_sensitive() because the copied option may contain secret material even when its representation is rejected, matching the sensitive cleanup used for stored DHCHAP secrets. | ||||
| CVE-2026-89972 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. | ||||
| CVE-2026-89962 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/kexec_file: Prevent kexec range truncation Sashiko AI review pointed out the following issue. The __merge_memory_ranges() function incorrectly handles overlapping memory ranges when merging them. Although sort_memory_ranges() sorts all ranges by their start address in ascending order beforehand, the merge logic remains defective in two ways: 1. It compares the current range's start against the previous element (i-1) instead of the running target index (idx) 2. It unconditionally overwrites 'ranges[idx].end' with 'ranges[i].end'. This logic flaw leads to critical memory truncation when a larger memory range completely subsumes subsequent smaller ranges. For example, consider a sorted input array with three ranges: Range A (idx=0): [0x1000 - 0x9000] Range B (i=1): [0x2000 - 0x5000] (completely inside Range A) Range C (i=2): [0x6000 - 0x8000] (completely inside Range A) 1. When i=1 (Range B): ranges[1].start (0x2000) <= ranges[0].end + 1 (0x9001) is TRUE. The code executes: ranges[0].end = ranges[1].end, which erroneously shrinks Range A's end from 0x9000 down to 0x5000. 2. When i=2 (Range C): ranges[2].start (0x6000) <= ranges[1].end + 1 (0x5001) is FALSE. The code falls into the else block, creating a broken new range. As a result, valid memory fragments [0x5001 - 0x5fff] and [0x8001 - 0x9000] are completely lost from the kexec exclude lists, potentially allowing the crash kernel to overwrite active memory, causing data corruption or crashes. Fix this by ensuring the start of the current range is compared against the end of the active merged range (idx), and use max() to safely prevent the outer boundary from being truncated. | ||||
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89958 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL The ap_driver structure has two fields which are function pointers to callbacks: * .on_config_changed: called at the start of the AP bus scan function to notify the device driver that the host AP configuration has changed and the associated AP devices will be added or removed accordingly. This gives the implementor a chance to evaluate the configuration changes and respond to them before the associated devices are added or removed. * .on_scan_complete: Called at the end of the AP bus scan function to notify the device driver that the host AP configuration has changed and the AP devices have been added or removed accordingly. This gives the implementor the opportunity to respond to the changes after the associated devices are added or removed. These two callbacks are implemented in the vfio_ap device driver via the vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively. Within the call stack of these two callback functions the matrix_mdev->kvm->lock mutex is taken without checking whether matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set, trying to take the lock will trigger a NULL pointer dereference. This patch adds checks for matrix_mdev->kvm == NULL before taking the matrix_mdev->kvm->lock mutex. Note that the matrix_mdev->kvm->lock mutex taken in the vfio_ap_mdev_hot_plug_config function is moved to the calling function along with the matrix_dev->mdevs_lock which is needed there to access the fields of the matrix_mdev. It makes little sense to make the change the check for matrix_mdev->kvm there before taking the kvm->lock mutex only to have to move it out via another patch, so it is done in this patch. It is important to make note of the following: 1. The matrix_dev->guests_lock is acquired at the start of both callback functions. This ensures that matrix_mdev will not be removed via the vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock before removing the object; so, matrix_mdev will be available for the duration of the callback functions. 2. The matrix_dev->mdevs_lock mutex must be taken in order to access fields within the matrix_mdev structure 3. matrix_mdev->kvm->lock mutex must be taken before the matrix_dev->mdevs_lock to prevent a lockdep splat. 4: The kvm->lock must be held while plugging the guest's AP configuration into its SIE state description via the vfio_ap_mdev_update_guest_apcb function. 5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it is not NULL before doing the hot plug of the guest's AP configuration. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89955 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix NULL deref in status_show() during queue probe When vfio_ap_mdev_probe_queue() creates the sysfs attribute group, the queue's driver data has not yet been set. A concurrent read of the 'status' attribute can therefore call dev_get_drvdata() and get NULL, which is then passed directly to vfio_ap_mdev_for_queue() where q->apqn is unconditionally dereferenced, causing a NULL pointer dereference. Fix this by acquiring the update locks before calling sysfs_create_group(). The status_show() function acquires guests_lock before reading the driver data, so any concurrent read will block until after dev_set_drvdata() has been called and the update locks are released. As a bonus, the APQN no longer needs to be read from the queue struct after allocation — it can be read directly from apdev before allocation and stored in a local variable, which is then assigned to q->apqn once the allocation succeeds. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89933 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: dps310: fix NULL pointer dereference on ACPI probe When the device is enumerated through its ACPI HID (IFX3100), i2c_client_get_device_id() returns NULL: the ACPI-derived client name does not match the driver's i2c_device_id table. dps310_probe() then dereferences that NULL pointer in "iio->name = id->name" and crashes the kernel during probe. The IIO device name is always "dps310", so set it directly and drop the now-unused device-id lookup. | ||||
| CVE-2026-89930 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Service local TLB flushes on failed nested VM-Enter KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architecturally require a TLB flush, the TLBs are updated so that, after VM entry, the logical processor will not use any translations that were cached before the transition. The SDM is unclear about when the TLB flush should occur, and whether or not a failed VM entry would flush the TLB, so it is safer to always do the TLB flush in this case. More concretely, KVM also updates the last VPID L1 used for L2 in nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry ultimately fails. With the current code, KVM could miss a TLB flush if L1 changes L2's VPID, then does a failed VM entry followed by a successful one, as the failed VM entry would update last_vpid but not actually flush the TLB. Servicing local TLB flushes on failed VM entries makes sure that the TLB is always flushed when last_vpid is updated. | ||||
| CVE-2026-89926 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix length check __import_wp_info() struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user space. This is then assigned to wp_info->len, which is an int. The bounds check is done on the truncated value while the allocation uses the untruncated one: wp_info->len = bp_data->len; [...] if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) return -EINVAL; wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT); Use the validated value for the allocation as intended. Without this fix userspace can trigger >4GB allocations which will fail and result in a WARN due to MAX_PAGE_ORDER. | ||||
| CVE-2026-89921 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Zero initialize data structures for inject_pfault_token __kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of the on-stack struct kvm_s390_irq but the full ext substructure is copied into the cpu local variable on inject. ext_params and pad contain stale stack values. Interrupt delivery only uses ext_params2, so nothing leaks to the guest, but a host user can use the migration ioctls to get to the data. Fix by zero-initializing the irq struct. Do the same for the inti data structure. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89912 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save MAPC with V=0 drops ite->collection but leaves the ITE on the device's ITT list, and vgic_its_save_ite() dereferences it unconditionally. A guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it. That sequence is UNPREDICTABLE per the architecture, but KVM already handles the resulting state in the translate, MOVI and DISCARD paths. Save a zeroed entry, which vgic_its_restore_ite() reads back as invalid. Skipping the ITE instead would leave the ITT slot holding whatever is in guest memory, and restore rejects an entry naming a collection the restored collection table does not have. | ||||
| CVE-2026-89884 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup Add the missing sanity check after looking up the SCP to avoid dereferencing a NULL-pointer in case its driver has not yet been bound. | ||||