Export limit exceeded: 414019 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414019 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2026-98405 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missing iov bounds check in parse_posix_sids() In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied out_len without being validated against the actual length of the received iov (iov_len). If a server provides an inflated out_len, sidsbuf_end will point past the end of the iov. This defeats the bounds guards in posix_info_sid_size(), allowing out-of-bounds reads into adjacent kernel memory. Fix this by rejecting responses where the calculated sidsbuf_end would exceed the received iov boundaries or cause pointer wraparound. | ||||
| CVE-2026-98401 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_xmit (net/core/dev.c:4787) br_dev_queue_push_xmit (net/bridge/br_forward.c:53) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:315) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6099) __netif_receive_skb_list_core (net/core/dev.c:6287) netif_receive_skb_list_internal (net/core/dev.c:6445) napi_complete_done (net/core/dev.c:6813) gro_cell_poll (net/core/gro_cells.c:74) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 ) __local_bh_enable_ip (kernel/softirq.c:450) tun_get_user (drivers/net/tun.c:1986 (discriminator 1)) tun_chr_write_iter (drivers/net/tun.c:2032) The issue is completely latent until qdisc read transport header in commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()"). The crash requires four conditions to line up: 1. The incoming packet is encapsulated and carries GSO metadata. The outer transport header offset is stored in skb->transport_header while the packet is still in the outer tunnel context. 2. The tunnel receiver strips the outer headers. skb->data is advanced to the inner frame, but skb->transport_header is left pointing to the now-removed outer L4 header, so it becomes a negative offset relative to the new data. 3. The inner frame is not delivered to the local IP stack. Instead, it is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and the transport header is not reset to the inner L4 offset. 4. The forwarding path calls __dev_queue_xmit(), which enters qdisc_pkt_len_segs_init(). That function computes the GSO header length from skb_transport_offset(skb). Because the offset is negative, the unsigned cast overflows and pskb_may_pull(skb, hdr_len + sizeof(struct tcphdr)) reads past the end of the skb, triggering a KASAN fault or page fault. The issue specifically requires GSO packets (shinfo->gso_size != 0), which are processed/aggregated through gro_cells. Fix this by clearing transport_header to the ~0U sentinel in gro_cell for all tunnnel driver. GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. | ||||
| CVE-2026-98385 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/cache: Decouple sched_cache_group from mm to fix UAF Currently the sched cache grouping is by mm and the scheduling statistics sched_cache_stat lives in the mm structure. This ties the life cycle of scheduling stats with mm. In account_mm_sched(), the scheduling stats are accessed by task->mm->sc_stat. However, a task may be switching mm on one CPU when another CPU is running account_mm_sched(), and possibly accessing the old mm that was freed. This problem was found when running tests with KASAN by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Instead of serializing the mm access by introducing extra acquisition of rq lock in the mm free path, extract sched_cache_stat from mm_struct, rename it as sched_cache_group and manage its life cycle apart from mm_struct with its own ref counting. This allows us in the next patch access sched_cache_group directly from task, and add a refcount on sched_cache_group when a task links to it. This prevents the use after free issue when accessing stale and released old mm and its sched cache stat a task switches to a new mm while account_mm_sched() is done elsewhere. The other benefit of this restructure is in the future, the grouping of tasks to a LLC would have the flexibility to be associated with a user defined grouping, or cgroup, cookie group, numa_group or others instead of just with a single mm address space. Rename sched_cache_stat to sched_cache_group and turn it into a refcounted object allocated from mm_struct. The mm_struct now holds a pointer (sched_cache_grp) to this object instead of embedding it. | ||||
| CVE-2026-98383 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL An LWT_SEG6LOCAL program can invalidate its cached SRH with bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter may reallocate skb->head, leaving the per-CPU SRH pointer dangling. Post-program SRH validation then writes through that pointer. Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier rejects this unsafe helper combination. Other LWT program types continue to expose the helper through lwt_out_func_proto(). | ||||
| CVE-2026-98382 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject dev-bound-only programs on other devices __bpf_offload_dev_match() falls back to comparing offdev pointers after an exact netdev mismatch. Bound-only programs normally have NULL offdevs, so unrelated netdevs compare equal. A bound-only program on an offload-registered netdev can instead inherit a real offdev and match a sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs specialized for the bound driver on the target driver's xdp_buff. Running a veth-bound program on tun reads beyond tun's bare stack xdp_buff as a veth_xdp_buff. Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673) Call Trace: ... tun_build_skb (drivers/net/tun.c:1739) tun_get_user (drivers/net/tun.c:1856) tun_chr_write_iter (drivers/net/tun.c:2091) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Restrict non-offloaded programs to exact netdev matches and retain the shared-offdev fallback only for genuinely offloaded multi-port programs. | ||||
| CVE-2026-98381 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: manage XDP program pointers during channel resize veth_set_channels() tears down XDP resources for removed RX queues without clearing rq->xdp_prog. If the program is then detached or replaced, those queues keep the old pointer after bpf_prog_put(). A later channel increase can re-enable NAPI and run the freed program. BUG: unable to handle page fault for address: ffffc90000256048 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: veth_xdp_rcv_skb (include/linux/filter.h:779 include/net/xdp.h:696 drivers/net/veth.c:820) Call Trace: veth_xdp_rcv (drivers/net/veth.c:941) veth_poll (drivers/net/veth.c:986) __napi_poll (net/core/dev.c:7787) net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007) handle_softirqs (kernel/softirq.c:645) Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-98378 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip unsettled links in link iterator bpf_link_prime() inserts a link into link_idr before anon_inode_getfile() succeeds and before bpf_link_settle() publishes the ID in link->id. bpf_link_by_id() treats such an ID-zero link as unsettled, but the link iterator takes a reference without this check. If anon_inode_getfile() then fails, the creator removes the ID and frees its still-private link directly. The iterator is left with a dangling reference and its next bpf_link_put() accesses freed memory. Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as bpf_link_by_id() does. BUG: KASAN: slab-use-after-free in bpf_link_put Write of size 8 by task exp/384 Call Trace: bpf_link_put kernel/bpf/syscall.c:3372 bpf_link_seq_next kernel/bpf/link_iter.c:33 bpf_seq_read kernel/bpf/bpf_iter.c:158 vfs_read fs/read_write.c:572 ksys_read fs/read_write.c:716 do_syscall_64 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121 Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-98376 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Use array_map_meta_equal for percpu array inner map replacement percpu_array_map_ops.map_meta_equal points to the generic bpf_map_meta_equal(), which does not compare max_entries. When a percpu array serves as an inner map, replacing it with one that has fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup() inlines the original template's index_mask as a JIT immediate, a lookup on the replacement map can access pptrs[] out of bounds. Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(), which already enforces the max_entries equality check. Add a selftest to verify that replacing a percpu array inner map with a differently-sized one is rejected. | ||||
| CVE-2026-98374 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack() When tcp_send_synack() replaces the cloned SYN skb at the head of the retransmit queue with a copy, it frees the original with tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack. tp->retransmit_skb_hint keeps pointing at the freed skbuff_fclone_cache object. The dangling hint is read in tcp_verify_retransmit_hint() and used as the root of the rbtree walk in tcp_xmit_retransmit_queue(). An unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with an attacker-supplied ICMP fragmentation-needed message, after which a simultaneous open frees the armed SYN skb: BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) Read of size 4 at addr ffff88800604d928 by task swapper/1/0 Call Trace: tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) tcp_simple_retransmit (net/ipv4/tcp_input.c:3158) tcp_v4_err (net/ipv4/tcp_ipv4.c:587) Sync the hint to the copy. | ||||
| CVE-2026-98865 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't run ops.dequeue() with a DSQ lock held ops.dequeue() is invoked with the source user DSQ's lock still held on the consume and move paths (scx_consume_dispatch_q(), move_task_between_dsqs()). A BPF scheduler which locks the source user DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq - self-deadlocks. ops.dequeue() can only call the "any" kfuncs and none of them can lock a builtin DSQ, so the global and bypass paths can't deadlock; however, all DSQ locks share one lockdep class, so iterating any user DSQ from ops.dequeue() on those paths trips the recursion check. Move the invocation after the DSQ unlock on all three paths. SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer so that the callback is invoked exactly once. | ||||
| CVE-2026-98866 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointer to task_struct so that scheduler code can access the cache group directly via the task, without going through mm->sched_cache_grp. This decouples the scheduler's hot-path accesses from the mm_struct. Each task holds its own refcount on the sched_cache_group, separate from the reference held by its mm_struct. The reference is acquired in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm(). This fixes the use-after-free when account_mm_sched() reaches the group through a task whose mm is being switched, as reported by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Convert all scheduler code in fair.c and exit.c to use p->sched_cache_grp instead of p->mm->sched_cache_grp. Keep the fork/exec/exit reference management out of the generic mm paths: add sched_cache_fork(), sched_cache_fork_cleanup(), sched_cache_exec_mmap() and sched_cache_exit_mm() in kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE), so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper instead of open-coding the refcounting under #ifdef. Also add sched_cache_group_get() and task_cache_group_get(). | ||||
| CVE-2026-114191 | 2026-10-24 | 7.5 High | ||
| Missing Authorization vulnerability in Knit Pay UPI QR Code Payment Gateway for WooCommerce upi-qr-code-payment-for-woocommerce allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects UPI QR Code Payment Gateway for WooCommerce: from n/a through 1.6.3. | ||||
| CVE-2026-114704 | 2026-10-24 | 7.2 High | ||
| Deserialization of Untrusted Data vulnerability in Christoph Vielgrader Relevanssi relevanssi allows Object Injection.This issue affects Relevanssi : from n/a through 4.28.4. | ||||
| CVE-2026-114192 | 2026-10-24 | 6.5 Medium | ||
| Missing Authorization vulnerability in Magepeople inc. WpEvently mage-eventpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WpEvently: from n/a through 5.7.8. | ||||
| CVE-2026-114629 | 2026-10-24 | N/A | ||
| Web::Simple versions before 0.035 for Perl allocate a buffer sized by the Content-Length header for urlencoded body parameters. Web::Dispatch::ParamParser::get_unpacked_body_from reads an application/x-www-form-urlencoded body using a single read call, with no cap and the return value ignored. Perl's read grows the buffer to the requested length before reading, so the declared Content-Length determines the allocation. An attacker can trigger this through any route whose dispatch specification has a % body-parameter match, such as sub (POST + %name=), sending a Content-Length far larger than the body actually sent. No authentication is involved. | ||||
| CVE-2026-88186 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-24 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-116012 | 2 Nationalsecurityagency, Nsa | 2 Ghidra, Ghidra | 2026-10-24 | 3.6 Low |
| Ghidra before 12.2 contains a numeric truncation vulnerability in PackedDecode::skipAttribute and skipAttributeRemaining in marshal.cc that stores 64-bit string lengths in 32-bit variables. Attackers can supply a crafted packed stream, such as a malicious .sla file, to inject attributes into the decompiler's input or crash the decompiler process. | ||||
| CVE-2026-115932 | 1 Gitroomhq | 1 Postiz-app | 2026-10-24 | 9.6 Critical |
| When a post is published, Postiz treats a media path that is not a web address as a file on the server's disk, but it does not check that the file lies inside the upload directory. A registered user can store a crafted media path with a post, get it past the checks that normally restrict it, and have the publishing worker read an arbitrary file and send it as an attachment to a Discord server the user controls. The same unconfined reads can be reached through two further routes. One tells the caller whether a file exists and can exhaust the backend's memory, the other delivers the file the same way as the main route. Self-registration is open by default, so the attacker needs no existing account. | ||||
| CVE-2026-94200 | 1 Erlang | 2 Erlang/otp, Erlang\/otp | 2026-10-24 | 5.9 Medium |
| Improper Validation of Consistency within Input vulnerability in Erlang OTP ssl (tls_handshake_1_3, ssl_handshake and tls_client_ticket_store modules) allows a malicious TLS 1.3 server to cause a denial of service of the ssl application on the client node. The TLS 1.3 client decodes the extensions of a NewSessionTicket message as if they came from EncryptedExtensions. It therefore accepts a 0-length early_data extension, a form that is only valid in ClientHello and EncryptedExtensions. With {session_tickets, auto}, the client stores the ticket in the node-global tls_client_ticket_store. On the next automatic resumption, tls_handshake_1_3:get_max_early_data/1 crashes the store with a case_clause. Repeated crashes can exceed the restart intensity of the ssl supervisors, which use the rest_for_one strategy, and take down ssl for all connections on the node. This issue affects OTP from OTP 23.3 before OTP 27.3.4.19, OTP 28.5.0.8, and OTP 29.1.2, corresponding to ssl from 10.3 before 11.2.12.14, 11.6.0.7, and 11.7.8. | ||||