Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40224 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc() The driver allocates memory for sensor data using devm_kzalloc(), but did not check if the allocation succeeded. In case of memory allocation failure, dereferencing the NULL pointer would lead to a kernel crash. Add a NULL pointer check and return -ENOMEM to handle allocation failure properly. | ||||
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40221 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: mg4b: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `scan` structure is zeroed before use. | ||||
| CVE-2025-40220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why. | ||||
| CVE-2025-40217 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pidfs: validate extensible ioctls Validate extensible ioctls stricter than we do now. | ||||
| CVE-2025-68771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix kernel BUG in ocfs2_find_victim_chain syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the `cl_next_free_rec` field of the allocation chain list (next free slot in the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec) condition in ocfs2_find_victim_chain() and panicking the kernel. To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(), just before calling ocfs2_find_victim_chain(), the code block in it being executed when either of the following conditions is true: 1. `cl_next_free_rec` is equal to 0, indicating that there are no free chains in the allocation chain list 2. `cl_next_free_rec` is greater than `cl_count` (the total number of chains in the allocation chain list) Either of them being true is indicative of the fact that there are no chains left for usage. This is addressed using ocfs2_error(), which prints the error log for debugging purposes, rather than panicking the kernel. | ||||
| CVE-2025-40207 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try() v4l2_subdev_call_state_try() macro allocates a subdev state with __v4l2_subdev_state_alloc(), but does not check the returned value. If __v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would cause v4l2_subdev_call_state_try() to crash. Add proper error handling to v4l2_subdev_call_state_try(). | ||||
| CVE-2025-40208 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. | ||||
| CVE-2025-68772 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid updating compression context during writeback Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857 Call Trace: <TASK> f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3290 [inline] f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317 do_writepages+0x38e/0x640 mm/page-writeback.c:2634 filemap_fdatawrite_wbc mm/filemap.c:386 [inline] __filemap_fdatawrite_range mm/filemap.c:419 [inline] file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794 f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294 generic_write_sync include/linux/fs.h:3043 [inline] f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x7e9/0xe00 fs/read_write.c:686 ksys_write+0x19d/0x2d0 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The bug was triggered w/ below race condition: fsync setattr ioctl - f2fs_do_sync_file - file_write_and_wait_range - f2fs_write_cache_pages : inode is non-compressed : cc.cluster_size = F2FS_I(inode)->i_cluster_size = 0 - tag_pages_for_writeback - f2fs_setattr - truncate_setsize - f2fs_truncate - f2fs_fileattr_set - f2fs_setflags_common - set_compress_context : F2FS_I(inode)->i_cluster_size = 4 : set_inode_flag(inode, FI_COMPRESSED_FILE) - f2fs_compressed_file : return true - f2fs_all_cluster_page_ready : "pgidx % cc->cluster_size" trigger dividing 0 issue Let's change as below to fix this issue: - introduce a new atomic type variable .writeback in structure f2fs_inode_info to track the number of threads which calling f2fs_write_cache_pages(). - use .i_sem lock to protect .writeback update. - check .writeback before update compression context in f2fs_setflags_common() to avoid race w/ ->writepages. | ||||
| CVE-2025-40200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity] | ||||
| CVE-2025-40197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released. | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2025-71199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove. | ||||
| CVE-2025-40193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xtensa: simdisk: add input size check in proc_write_simdisk A malicious user could pass an arbitrarily bad value to memdup_user_nul(), potentially causing kernel crash. This follows the same pattern as commit ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") | ||||
| CVE-2025-40192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "ipmi: fix msg stack when IPMI is disconnected" This reverts commit c608966f3f9c2dca596967501d00753282b395fc. This patch has a subtle bug that can cause the IPMI driver to go into an infinite loop if the BMC misbehaves in a certain way. Apparently certain BMCs do misbehave this way because several reports have come in recently about this. | ||||
| CVE-2025-40191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd process ref leaking when userptr unmapping kfd_lookup_process_by_pid hold the kfd process reference to ensure it doesn't get destroyed while sending the segfault event to user space. Calling kfd_lookup_process_by_pid as function parameter leaks the kfd process refcount and miss the NULL pointer check if app process is already destroyed. | ||||
| CVE-2025-71196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: stm32-usphyc: Fix off by one in probe() The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=. | ||||
| CVE-2025-71195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault | ||||
| CVE-2025-40188 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pwm: berlin: Fix wrong register in suspend/resume The 'enable' register should be BERLIN_PWM_EN rather than BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there will be cpu exception then kernel panic during suspend/resume. | ||||
| CVE-2025-40189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom Syzbot reported read of uninitialized variable BUG with following call stack. lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout ===================================================== BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707 Local variable sig.i.i created at: lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM read timeout errors (-ETIMEDOUT). In the fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error. As a result, callers could mistakenly treat the data buffer as valid even though the EEPROM read had actually timed out with no data or partial data. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM timeout error correctly to the caller. | ||||