Export limit exceeded: 26198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26198 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2025-40116 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup The kthread_run() function returns error pointers so the max3421_hcd->spi_thread pointer can be either error pointers or NULL. Check for both before dereferencing it. | ||||
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-40107 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks. | ||||
| CVE-2025-68328 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix bug in saving controller data Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They both are of the same data and overrides each other. This resulted in the rmmod of the svc driver to fail and throw a kernel panic for kthread_stop and fifo free. | ||||
| CVE-2025-68330 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: Fix irq assumption regression The code in bmc150-accel-core.c unconditionally calls bmc150_accel_set_interrupt() in the iio_buffer_setup_ops, such as on the runtime PM resume path giving a kernel splat like this if the device has no interrupts: Unable to handle kernel NULL pointer dereference at virtual address 00000001 when read PC is at bmc150_accel_set_interrupt+0x98/0x194 LR is at __pm_runtime_resume+0x5c/0x64 (...) Call trace: bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108 bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc __iio_update_buffers from enable_store+0x84/0xc8 enable_store from kernfs_fop_write_iter+0x154/0x1b4 This bug seems to have been in the driver since the beginning, but it only manifests recently, I do not know why. Store the IRQ number in the state struct, as this is a common pattern in other drivers, then use this to determine if we have IRQ support or not. | ||||
| CVE-2025-40110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-40106 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands. | ||||
| CVE-2025-40091 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix too early devlink_free() in ixgbe_remove() Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-68339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: atm/fore200e: Fix possible data race in fore200e_open() Protect access to fore200e->available_cell_rate with rate_mtx lock in the error handling path of fore200e_open() to prevent a data race. The field fore200e->available_cell_rate is a shared resource used to track available bandwidth. It is concurrently accessed by fore200e_open(), fore200e_close(), and fore200e_change_qos(). In fore200e_open(), the lock rate_mtx is correctly held when subtracting vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth. However, if the subsequent call to fore200e_activate_vcin() fails, the function restores the reserved bandwidth by adding back to available_cell_rate without holding the lock. This introduces a race condition because available_cell_rate is a global device resource shared across all VCCs. If the error path in fore200e_open() executes concurrently with operations like fore200e_close() or fore200e_change_qos() on other VCCs, a read-modify-write race occurs. Specifically, the error path reads the rate without the lock. If another CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in fore200e_close()) between this read and the subsequent write, the error path will overwrite the concurrent update with a stale value. This results in incorrect bandwidth accounting. | ||||
| CVE-2025-68734 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe() In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when setup_instance() fails with an error code. Fix that by freeing the urb before freeing the hw structure. Also change the error paths to use the goto ladder style. Compile tested only. Issue found using a prototype static analysis tool. | ||||
| CVE-2025-40062 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs When the initialization of qm->debug.acc_diff_reg fails, the probe process does not exit. However, after qm->debug.qm_diff_regs is freed, it is not set to NULL. This can lead to a double free when the remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs should be set to NULL after it is freed. | ||||
| CVE-2025-40066 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links() In order to avoid a possible NULL pointer dereference in mt7996_mac_sta_init_link routine, move the phy pointer check before running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine. | ||||
| CVE-2025-40063 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: comp - Use same definition of context alloc and free ops In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp"), the crypto_acomp_streams struct was made to rely on having the alloc_ctx and free_ctx operations defined in the same order as the scomp_alg struct. But in that same commit, the alloc_ctx and free_ctx members of scomp_alg may be randomized by structure layout randomization, since they are contained in a pure ops structure (containing only function pointers). If the pointers within scomp_alg are randomized, but those in crypto_acomp_streams are not, then the order may no longer match. This fixes the problem by removing the union from scomp_alg so that both crypto_acomp_streams and scomp_alg will share the same definition of alloc_ctx and free_ctx, ensuring they will always have the same layout. | ||||
| CVE-2025-40059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix incorrect handling for return value of devm_kzalloc The return value of devm_kzalloc could be an null pointer, use "!desc.pdata" to fix incorrect handling return value of devm_kzalloc. | ||||