Export limit exceeded: 421176 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38719 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix the division by zero issue When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0. | ||||
| CVE-2022-50264 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: socfpga: Fix memory leak in socfpga_gate_init() Free @socfpga_clk and @ops on the error path to avoid memory leak issue. | ||||
| CVE-2022-50263 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpasim: fix memory leak when freeing IOTLBs After commit bda324fd037a ("vdpasim: control virtqueue support"), vdpasim->iommu became an array of IOTLB, so we should clean the mappings of each free one by one instead of just deleting the ranges in the first IOTLB which may leak maps. | ||||
| CVE-2022-50262 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate BOOT record_size When the NTFS BOOT record_size field < 0, it represents a shift value. However, there is no sanity check on the shift result and the sbi->record_bits calculation through blksize_bits() assumes the size always > 256, which could lead to NPD while mounting a malformed NTFS image. [ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 318.675682] #PF: supervisor read access in kernel mode [ 318.675869] #PF: error_code(0x0000) - not-present page [ 318.676246] PGD 0 P4D 0 [ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5 [ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0 [ 318.685623] Call Trace: [ 318.686607] <TASK> [ 318.686872] ? ntfs_alloc_inode+0x1a/0x60 [ 318.687235] attr_load_runs_vcn+0x2b/0xa0 [ 318.687468] mi_read+0xbb/0x250 [ 318.687576] ntfs_iget5+0x114/0xd90 [ 318.687750] ntfs_fill_super+0x588/0x11b0 [ 318.687953] ? put_ntfs+0x130/0x130 [ 318.688065] ? snprintf+0x49/0x70 [ 318.688164] ? put_ntfs+0x130/0x130 [ 318.688256] get_tree_bdev+0x16a/0x260 [ 318.688407] vfs_get_tree+0x20/0xb0 [ 318.688519] path_mount+0x2dc/0x9b0 [ 318.688877] do_mount+0x74/0x90 [ 318.689142] __x64_sys_mount+0x89/0xd0 [ 318.689636] do_syscall_64+0x3b/0x90 [ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 318.690318] RIP: 0033:0x7fd9e133c48a [ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a [ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0 [ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020 [ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0 [ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff [ 318.693007] </TASK> [ 318.693271] Modules linked in: [ 318.693614] CR2: 0000000000000158 [ 318.694446] ---[ end trace 0000000000000000 ]--- [ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ ---truncated--- | ||||
| CVE-2023-53196 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: qcom: Fix potential memory leak Function dwc3_qcom_probe() allocates memory for resource structure which is pointed by parent_res pointer. This memory is not freed. This leads to memory leak. Use stack memory to prevent memory leak. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-53169 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags] | ||||
| CVE-2025-62687 | 4 Linux, Logstare, Microsoft and 1 more | 5 Linux, Linux Kernel, Collector and 2 more | 2025-12-02 | N/A |
| Cross-site request forgery vulnerability exists in LogStare Collector. If a user views a crafted page while logged, unintended operations may be performed. | ||||
| CVE-2025-64299 | 4 Linux, Logstare, Microsoft and 1 more | 5 Linux, Linux Kernel, Collector and 2 more | 2025-12-02 | 2.7 Low |
| LogStare Collector improperly handles the password hash data. An administrative user may obtain the other users' password hashes. | ||||
| CVE-2025-13315 | 3 Linux, Lynxtechnology, Microsoft | 4 Linux, Linux Kernel, Twonky Server and 1 more | 2025-12-02 | 9.8 Critical |
| Twonky Server 8.5.2 on Linux and Windows is vulnerable to an access control flaw. An unauthenticated attacker can bypass web service API authentication controls to leak a log file and read the administrator's username and encrypted password. | ||||
| CVE-2021-26829 | 3 Linux, Microsoft, Scadabr | 3 Linux Kernel, Windows, Scadabr | 2025-12-02 | 5.4 Medium |
| OpenPLC ScadaBR through 0.9.1 on Linux and through 1.12.4 on Windows allows stored XSS via system_settings.shtm. | ||||
| CVE-2023-53177 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: hi846: fix usage of pm_runtime_get_if_in_use() pm_runtime_get_if_in_use() does not only return nonzero values when the device is in use, it can return a negative errno too. And especially during resuming from system suspend, when runtime pm is not yet up again, -EAGAIN is being returned, so the subsequent pm_runtime_put() call results in a refcount underflow. Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use(). | ||||
| CVE-2023-53175 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. | ||||
| CVE-2023-53180 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Currently 'ar' reference is not added in skb_cb. Though this is generally not used during transmit completion callbacks, on interface removal the remaining idr cleanup callback uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them during transmit call for proper usage to avoid NULL pointer dereference. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2023-53179 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue. | ||||
| CVE-2023-53181 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-resv: Stop leaking on krealloc() failure Currently dma_resv_get_fences() will leak the previously allocated array if the fence iteration got restarted and the krealloc_array() fails. Free the old array by hand, and make sure we still clear the returned *fences so the caller won't end up accessing freed memory. Some (but not all) of the callers of dma_resv_get_fences() seem to still trawl through the array even when dma_resv_get_fences() failed. And let's zero out *num_fences as well for good measure. | ||||
| CVE-2023-53187 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked ---truncated--- | ||||
| CVE-2023-53191 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2023-53193 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 | ||||
| CVE-2023-53195 | 1 Linux | 1 Linux Kernel | 2025-12-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init The line cards array is not freed in the error path of mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by freeing the array in the error path, thereby making the error path identical to mlxsw_m_linecards_fini(). | ||||
| CVE-2024-27008 | 4 Debian, Fedoraproject, Linux and 1 more | 4 Debian Linux, Fedora, Linux Kernel and 1 more | 2025-12-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||